https://wiki.makeict.org/api.php?action=feedcontributions&user=Dominic+Canare&feedformat=atomMakeICT Wiki - User contributions [en]2024-03-29T12:48:19ZUser contributionsMediaWiki 1.33.0https://wiki.makeict.org/index.php?title=Woodshop_Area&diff=6498Woodshop Area2019-11-09T01:49:51Z<p>Dominic Canare: /* Commercial Sources for Wood */</p>
<hr />
<div>== General Information ==<br />
MakeICT's woodshop is an enclosed 32'x36' (1152 sq ft) air conditioned area dedicated to wood working.<br />
<br />
[[User:Doug Wilson|Doug Wilson]] is the Area Lead over the woodshop.<br />
<br />
The goal of the shop space is to encourage safe, continued learning of the skills needed to further your knowledge of woodworking!<br />
<br />
== Woodworking Terminology Glossary ==<br />
*[http://www.popularwoodworking.com/tools/woodworking-glossary Popular Woodworking Magazine]<br />
<br />
*[http://www.woodmagazine.com/woodworking-tips/techniques/skills/glossary-of-wood-words Wood Magazine]<br />
<br />
== Machine Access Policy ==<br />
{{:Woodshop_Access_Policy}}<br />
<br />
== Specific Tools ==<br />
Please use the DeWalt DWV012 HEPA tool actuated dust extractor for capturing sanding dust connected to sanders to gather the fine sanding dust at the source, it is not a shop vacuum.<br />
[[File:DWV012.jpg]]<br />
<br />
==General Shop Safety==<br />
# Do not use any machine you are not trained on and comfortable using. If at any time you are unsure of what you are doing, stop immediately and ask for help. Do not force tools.<br />
# Do not use any machine that is not in good working order. Stop, unplug and leave a note on the machine and notify the Woodshop Lead.<br />
# NEVER ASSUME A TOOL IS PROPERLY ADJUSTED. Always check the tool prior to use.<br />
# Wear safety glasses at all times when in the shop area, including near the machine shop.<br />
# Ear protection is also recommended, many of the tools operate above 90 decibels and without protection, you are losing hearing.<br />
# When using power tools (including hand power tools):<br />
#* No open-toed shoes or loose clothing (remove drawstrings)<br />
#* Remove objects on hands and wrists (including rings, bracelets, & watches)<br />
#* Remove dangly necklaces, hair ornaments, and earrings<br />
#* Restrain long hair to prevent entanglement<br />
#* Do not wear gloves when operating machinery<br />
# While hand tools are safer than most power tools, they are the cause of most workshop injuries. Make sure all hand tools are sharp and in good condition. Be certain that you know how to use these tools in a way that is safe, effective, and will not damage the tool. <br />
# Do not leave machines running unattended.<br />
# Never talk to or disturb anyone operating power tools. If you must talk to an operator wait until the operator notices you. <br />
# Be aware of the work going on around you. Do not accidentally bump into another person or their materials while they are working. <br />
# Most shop accidents are caused by working tired, rushed or distracted. As you get more experience, you will learn to listen to the little voice in the back of your mind that says, you probably shouldn't do that. Stop and think, there is usually a safer way of performing that function. These machines do not have a brain, please use yours!<br />
<br />
==Woodshop Specific Safety==<br />
# All powered woodcutting and sanding tools must be run with dust collection or vacuum equipment connected to the appropriate ports and on at all times. Do not switch the dust collector on and off without time to cool, if you are planning on working with multiple tools, leave the collector on (repeated quickly turning on and off will overheat the motor).<br />
# Smoke or sparks are bad signs in the woodshop. Stop what you are doing and correct the problem. Usually correct feed and depth of cut or getting a sharp bit / blade will help.<br />
# No metal cutting allowed on woodshop equipment.<br />
# No wet or damp items of any type (including drink containers, rags, or hands) may be placed or left on machine surfaces as they will corrode.<br />
# Do not lean or sit on machinery, these are precision pieces of equipment and you can mis-align them.<br />
# You are responsible for cleaning your machines, your work space, and putting all tools away immediately after use. Scrap wood should be placed in designated locations. Use vacuums or hand brushes to clean machinery.<br />
# Users who consistently fail in their clean-up responsibilities may be denied shop access.<br />
# Do not use stationary equipment work surfaces for sanding, project assembly, layout, applying finishes, etc. Or for uses other than their intended purpose.<br />
# Make sure machines are in the “off” position and motion has stopped, before leaving them after use.<br />
# All safety guards must be kept in place while operating equipment. If a guard or safety device is an impediment to safe operation of a machine - ask for help.<br />
# Use equipment only for its intended use.<br />
# If you have made an adjustment to a piece of equipment, return it to its normal position after you are done.<br />
# Make sure the machine’s work surface is unobstructed and clean before use.<br />
# Always be aware of the proximity of moving machine parts to body parts - fingers.<br />
# Defects in the wood can be dangerous. Check the stock carefully for knots, splits, and other defects. <br />
# Keep the machine clean. Remove all tools, lumber, and unnecessary materials.<br />
# Objects left on the machine can vibrate into revolving cutters. They can then be thrown from the machine with great force. Never clean a machine while it is running.<br />
# All guests are the responsibility of the member, guests are not allowed to use equipment, unless authorized. This is a working shop, so children less than 9 years old are not allowed for safety.<br />
# DO NOT cut anything conductive such as mirrored acrylic, carbon based materials, or laser cutter waste on the Saw Stop tablesaw, the charred areas are carbon and because carbon is conductive, will set off the brake cartridge.<br />
# Member will be responsible for replacing the blade and Sawstop brake if the brake is fired for anything other than a true safety firing. If it is a true safety firing, we will need a photo of the fresh wound and SawStop will evaluate the recorded cartridge memory. If SawStop deems it to be a safety firing, they will need the photo and a release for marketing use and they send a replacement cartridge.<br />
<br />
[https://www.youtube.com/watch?v=u7sRrC2Jpp4 This is a video on table saw kickback]. Do not try this in the woodshop!<br />
<br />
== Equipment List ==<br />
<onlyinclude><br />
{| class="wikitable sortable" ! data-sort-type="Tool"|<br />
|-<br />
! Picture !! What !! Manufacturer !! Model !! Power !! Status<br />
|-<br />
| [[File:Sawstop.jpg|200px]] || [http://www.sawstop.com/images/uploads/manuals/PCS%20Owners%20Manual%20Model%20PCS31230%20V5.0%2009-13.pdf 10" Cabinet Table Saw] || Saw Stop || Professional PCS31230 || 220 || Operational <br />
|-<br />
| [[File:freud_SD508.jpg|200px]] || 8 In. Super Stacked Dado Set 8 x 24 Tooth 1/4" to 29/32“||Freud || SD508|| NA|| Operational <br />
|-<br />
| [[File:Shopfox_jointer.jpg|200px]] || [http://pics.woodstockint.com/manuals/w1741s_m.pdf 8" Carbide Helical Head Jointer] || Shop Fox || W1741S || 220 || Operational<br />
|-<br />
| [[File:Jet_jwp-15hh.jpg|200px]] || [http://content.jettools.com/assets/manuals/708538_man_EN.pdf 15" Carbide Helical Head Planer] || Jet || JWP-15HH || 220 || Operational<br />
|-<br />
| [[File:Jet_jdp-17dx.jpg|200px]] || [[media:17inchDrillPressManual.pdf|17" Drill Press with laser]] || Jet || JDP-17DX || 110 || Operational<br />
|-<br />
| [[File:Jet_jbos-5.jpg|200px]] || [http://content.jettools.com/assets/manuals/708404_man_EN.pdf Oscillating Spindle Sander] || Jet || JBOS-5 || 110 || Operational <br />
|-<br />
| [[File:jet_jwbg-8.jpg|200px]] || [http://content.jettools.com/assets/manuals/726100_man_EN.pdf Low Speed 8" Bench Grinder] || Jet || JWBG-8 || 110 || Operational <br />
|-<br />
| [[File:worksharp_ws3000.jpg|200px]] || [http://www.worksharptools.com/media/mconnect_uploadfiles/p/p/pp0002326_rev_2_ws3000_tri-ling_users_guide.pdf Tool Sharpener] || Work Sharp || WS3000 || 110 || Operational <br />
|-<br />
| [[File:buffer.jpg|200px]] || [[media:8 inch buffer manual.pdf|8" Buffer for Honing]] || Central Machinery || 40668 || 110 || Operational <br />
|-<br />
| [[File:granite.jpg|200px]] || Granite Surface Plate for Sharpening ||9" x 12" x 2" A Grade || Granite Surface Plate|| NA|| Operational <br />
|-<br />
<br />
| [[File:OneidaDustGorilla.jpg|150px]] || [http://www.oneida-air.com/pdf/super-dust-gorilla-owners-manual-cmbn-2014-web.pdf Cyclone Dust Collector] || Oneida Air || 5HP Super Dust Gorilla || 220 || Operational <br />
|-<br />
| [[File:AFS-1000B.jpg|200px]] || [[media:AFS-1000B_manual.pdf|3-speed Remote Control Shop Ambient Dust Filter]] || Jet || AFS-1000B || 110 || Operational <br />
|-<br />
<br />
| [[File:DwaltDW788.jpg|200px]] || [[media:383329-00,DW788.pdf|20" Scroll Saw]] || Dewalt || DW788 || 110 || Operational<br />
|-<br />
| [[File:delta_40-560.jpg|200px]] || [[media:Delta40-560_manual.pdf|16" Two speed Scroll Saw]] || Delta|| 40-560, TY II || 110 || Operational <br />
|-<br />
| [[File: DW331K.jpg|200px]] || [[media: DW331K _manual.pdf|T-slot Jigsaw]] || DeWalt || DW331K || 110 || Operational <br />
|-<br />
| [[File:Skil_4480.jpg|200px]] || [[media:Skil_4480_manual.pdf|Jigsaw]] || Skil|| 4480|| 110 || Operational <br />
|-<br />
| [[File:PC-557.jpg|200px]] || [[media:PC557_manual.pdf|"Biscuit Cutter" Plate Jointer]] || Porter Cable|| 557|| 110 || Operational <br />
|-<br />
| [[File:BoschRouter.png|200px]] || [[media:BoschRouterManual.pdf|2.25HP Router]] || Bosch || 1617EVSPK || 110 || Operational <br />
|-<br />
| [[File: DWP611PK.jpg|200px]] || [[media: DWP611PK_manual.pdf|1.25HP Fixed Base/Plunge Base Router]] || DeWalt || DWP611PK || 110 || Operational<br />
|-<br />
| [[File:Bosch_colt_router.png|200px]] || [[media:Bosch_colt_manual.pdf|1HP Router]] || Bosch || Colt || 110 || Operational<br />
|-<br />
| [[File:4212.jpg|200px]] || [[media:4212_manual.pdf|12" Dovetail Jig]] / [[media:4212_SupplementalManual.pdf|Advanced Supplemental Manual]] || Porter Cable || 4212 || Manual || Operational<br />
|-<br />
| [[File:dremel_MM30.jpg|200px]] || [[media:MM30_manual.pdf|Multi-Max Oscillating Tool]] || Dremel || MM30 || 110 || Operational<br />
|-<br />
| [[File:HitachiFinishNailer.jpg|180px]] || [http://www.hitachipowertools.com/PDF/All/NT50AE2_OM.PDF 2" 18Gauge Finish Nailer] || Hitachi || NT50AE2 || Air || Operational<br />
|-<br />
| [[File:pc_bn125a.jpg|200px]] || [[media:PC_BN125A_manual.pdf|18 Gauge 5/8-1-1/4" Brad Nailer]] || Porter Cable|| BN125A|| Air || Operational<br />
|-<br />
| [[File:Sears_AC.jpg|200px]] || 2HP Air Compressor || Sears|| 20 Gallon|| 220V || Operational<br />
|-<br />
| [[File:Router_table.jpg|200px]] || Router Table || Rockler || || NA || Operational<br />
|-<br />
| [[File:PorterCable7518.jpg|200px]] || [[media:PorterCable7518OwnerManual.pdf|Router Table with JessEm Lift]] || Porter Cable || 7518 || 110 || Operational<br />
|-<br />
| [[File:DW715.jpg|200px]] || [[media:DW715_manual.pdf|12" Single Bevel Miter Saw]] || Dewalt || DW715 || 110 || Operational<br />
|-<br />
| [[File:PowerMatic30b.jpg|200px]] || [[media:PM30_manual.pdf|6x48" Belt/12" Disc sander]] || Powermatic || 30b || 110 || Operational<br />
|-<br />
| [[File:Delta_31-460.jpg|200px]] || [[media:Delta_31-460__manual.pdf|4x36" Belt/5" Disc sander]] || Delta || 31-460 || 110 || Operational<br />
|-<br />
| [[File: DWV012.jpg|200px]] || [[media: DWV012 _manual.pdf|10 gallon HEPA Tool Actuated Self-cleaning Dust Extractor]] || DeWalt || DWV012 || 110 || Operational<br />
|-<br />
| [[File:PC_382_sander.jpg|200px]] || [[media:PC_382_manual.pdf|5 inch 8-hole hook and loop Random Orbit Sander]] || Porter Cable|| 382 || 110 || Operational<br />
|-<br />
| [[File: DWE6421K.jpg|200px]] || [[media: DWE6421K _manual.pdf|5” 8-hole hook and loop random orbit sander]] || DeWalt || DWE6421K || 110 || Operational<br />
|-<br />
| [[File:bosch_1295dvs.jpg|200px]] |||5" 8-Hole variable speed random orbit sander || Bosch|| 1295DVS|| 110 || Operational<br />
|-<br />
| [[File:315279870.jpg|200px]] |||5" 8-Hole Hook & Loop Random Orbit Sander || Craftsman|| 315.279870|| 110 || Operational<br />
|-<br />
| [[File:PC330.jpg|200px]] |||1/4 Sheet Finish Sander || Porter Cable|| 330 Speed Bloc|| 110 || Operational<br />
|-<br />
| [[File:Dremel 1731 sander.jpg|200px]] || 1x30 Belt/5 Disc sander || Dremel|| 1731 || 110 || Operational<br />
|-<br />
| [[File:W1706.jpg|200px]] || [[media:W1706_manual.pdf|14" Bandsaw 93-1/2 inch blade]] || Shop Fox || W1706 14" Enclosed Base || 110 || Operational<br />
|-<br />
| [[File:g0513x2.jpg|200px]] || [[media:g0513x2 manual.pdf|17" Bandsaw Extreme Series 131-1/2 inch blade]] || Grizzly || G0513X2|| 220 || Operational<br />
|-<br />
| [[File:Jet1221VS.jpg|200px]] || [[media:Jet1221VS_manual.pdf|12x43 Electronic Variable Speed Wood Lathe]] || Jet|| 1221VS with extension|| 110 || Operational<br />
|-<br />
| [[File:Oneway_talon.jpg|200px]] || 1X8TPI Wood Lathe Chuck ||Oneway|| Talon|| manual || Operational<br />
|-<br />
| [[File:Nova Mercury Lathe.jpg|200px]] || [[media:Nova Mercury Lathe manual.pdf| Variable Speed 8"x11" Mini Wood Lathe]] || Teknatool ||Nova Mercury || 110 || Operational<br />
|-<br />
| [[File:shopbot_alpha_4x8.jpg|200px]] || 4'x 8' 3 Axis [[Shopbot]] CNC Router|| ShopBot || PRT 96|| 110 || Operational<br />
|-<br />
| [[File:parallel_clamp.jpg|200px]] || 24" (qty 2) & 40" (qty 2) & 48" (qty 2) Clamps || Jorgensen || Cabinet Master Clamps || manual || Operational<br />
|-<br />
| [[File:Jet_clamp.jpg|200px]] || 24" (qty 4) & 31" (qty 2) Clamps || Jet || Parallel Clamps || manual || Operational<br />
|-<br />
| [[File:bessey_tradesman_clamps.jpg|200px]] || 30 piece assortment Clamps|| Bessey || Tradesman Clamps|| manual || Operational<br />
|-<br />
| [[File:bessey deep.jpg|200px]] || Deep reach (qty 2) Clamps|| Bessey || Tradesman Clamps|| manual || Operational<br />
|-<br />
| [[File:Masterforce_clamp.jpg|200px]] || Deep reach 12" (qty 2) & 24" (qty 7) 36" (qty 2) Clamps|| Masterforce || Clamps|| manual || Operational<br />
|-<br />
| [[File:Irwin_quick_clamp.jpg|200px]] || Quick Grip 6" (qty 8) Clamps|| Irwin || Clamps|| manual || Operational<br />
|-<br />
| [[File:bessey strap clamp.jpg|200px]] || High Tension Strap Clamp|| Bessey || VSC|| manual || Operational<br />
|-<br />
| [[File:Kreg-JIg-K5.jpg|200px]] || [[media:K5Manual.pdf|Kreg Jig Pocket Hole Kit]] || Kreg || K5 || manual || Operational <br />
|-<br />
| [[File:DMT_Stone.jpg|200px]] || Diamond sharpening stones|| DMT || 6" x2" fine and extra-fine || manual || Operational <br />
|-<br />
| [[File:mini-hone.jpg|200px]] || Detail diamond honing kit|| DMT || course, fine and extra-fine D2K|| manual || missing from the shop<br />
|-<br />
| [[File:D3246.jpg|200px]] || [[media:D3246_manual.pdf|Tablesaw Tenon Jig (Multi-axis)]]||Shop Fox || D3246|| manual || Operational<br />
|-<br />
| [[File: DCK280C2.jpg|200px]] || [[media: DCK280C2 _manual.pdf|20V cordless ½” drill/driver and Impactor set]] || DeWalt || DCK280C2 || 1.5Ah battery || Operational <br />
|-<br />
| [[File: DCK283D2.jpg|200px]] || [[media: DCK283D2 _manual.pdf|20V Brushless ½” drill/driver and Impactor set]] || DeWalt || DCK283D2 || 1.5Ah battery || Operational <br />
|-<br />
| [[File:Ridgid_wd09450.jpg|200px]] || 9 Gallon Shop Vacuum || Ridgid|| WD09450|| 110 || Operational<br />
|-<br />
| [[File:eagle_1932.jpg|200px]] || 30 Gallon Flammable Liquid Storage Cabinet]] || Eagle|| 1932|| Manual|| Operational<br />
|-<br />
|}<br />
</onlyinclude><br />
<br />
== Commercial Sources for Wood==<br />
<br />
Purchasing hardwood lumber is very different from purchasing construction lumber. Note that Hardwood Lumber is a botanical term and is not related to the relative hardness of the wood. Hardwoods shed their leaves in the fall. Softwoods are evergreen. That is a general rule, and there are exceptions. Note also that Balsa and Basswood are classified as Hardwoods.<br />
<br />
See Wikipedia for [https://en.wikipedia.org/wiki/Lumber#North_American_hardwoods more detail on terms, definitions, and practices involved in purchasing hardwoods in the US].<br />
<br />
----<br />
=== [https://www.rivercitysawmill.com/ River City Sawmill] ===<br />
* (316) 200-0512<br />
* 147 N Oliver St, Kechi, Kansas<br />
* Eric Means is a Member of MakeICT. <br />
* Richards Wood Shop<br />
<br />
=== [https://eldersliewoodworks.com/ Elderslie Woodworks] ===<br />
* (316) 351-2250<br />
* [https://goo.gl/maps/afY4BmYE2GBzGzge7 3501 E 101st Street N, Valley Center, KS 67147]<br />
* By Appointment<br />
<br />
=== [https://www.starlumber.com/ Star Lumber] ===<br />
* Main number: (316) 942-2221 (Option 4)<br />
* Yard Number: (316) 941-0144<br />
* [https://goo.gl/maps/zuPoUsS1qkt7TR7j6 3700 W Irving St, Wichita, KS 67213]<br />
* Hard Wood Stock<br />
* Best Directions is West St. S of Kellogg take Irving East to the Yard. Irving is the street on the North side of Maximum Outdoor Equipment.<br />
<br />
=== [http://www.friedenlumber.com/ Mark Frieden Lumber] ===<br />
* [https://goo.gl/maps/jLSDAoZb4ZdKESFS8 3462 Delaware Rd., Pomona, KS 66076]<br />
<br />
=== [https://www.intermountainwood.com/ Intermountain Woods] ===<br />
* (801) 486-5414<br />
* Wichita Location is closed, but they will service Wichita from other locations</div>Dominic Canarehttps://wiki.makeict.org/index.php?title=Woodshop_Area&diff=6497Woodshop Area2019-11-09T01:40:52Z<p>Dominic Canare: /* Commercial Sources for Wood */</p>
<hr />
<div>== General Information ==<br />
MakeICT's woodshop is an enclosed 32'x36' (1152 sq ft) air conditioned area dedicated to wood working.<br />
<br />
[[User:Doug Wilson|Doug Wilson]] is the Area Lead over the woodshop.<br />
<br />
The goal of the shop space is to encourage safe, continued learning of the skills needed to further your knowledge of woodworking!<br />
<br />
== Woodworking Terminology Glossary ==<br />
*[http://www.popularwoodworking.com/tools/woodworking-glossary Popular Woodworking Magazine]<br />
<br />
*[http://www.woodmagazine.com/woodworking-tips/techniques/skills/glossary-of-wood-words Wood Magazine]<br />
<br />
== Machine Access Policy ==<br />
{{:Woodshop_Access_Policy}}<br />
<br />
== Specific Tools ==<br />
Please use the DeWalt DWV012 HEPA tool actuated dust extractor for capturing sanding dust connected to sanders to gather the fine sanding dust at the source, it is not a shop vacuum.<br />
[[File:DWV012.jpg]]<br />
<br />
==General Shop Safety==<br />
# Do not use any machine you are not trained on and comfortable using. If at any time you are unsure of what you are doing, stop immediately and ask for help. Do not force tools.<br />
# Do not use any machine that is not in good working order. Stop, unplug and leave a note on the machine and notify the Woodshop Lead.<br />
# NEVER ASSUME A TOOL IS PROPERLY ADJUSTED. Always check the tool prior to use.<br />
# Wear safety glasses at all times when in the shop area, including near the machine shop.<br />
# Ear protection is also recommended, many of the tools operate above 90 decibels and without protection, you are losing hearing.<br />
# When using power tools (including hand power tools):<br />
#* No open-toed shoes or loose clothing (remove drawstrings)<br />
#* Remove objects on hands and wrists (including rings, bracelets, & watches)<br />
#* Remove dangly necklaces, hair ornaments, and earrings<br />
#* Restrain long hair to prevent entanglement<br />
#* Do not wear gloves when operating machinery<br />
# While hand tools are safer than most power tools, they are the cause of most workshop injuries. Make sure all hand tools are sharp and in good condition. Be certain that you know how to use these tools in a way that is safe, effective, and will not damage the tool. <br />
# Do not leave machines running unattended.<br />
# Never talk to or disturb anyone operating power tools. If you must talk to an operator wait until the operator notices you. <br />
# Be aware of the work going on around you. Do not accidentally bump into another person or their materials while they are working. <br />
# Most shop accidents are caused by working tired, rushed or distracted. As you get more experience, you will learn to listen to the little voice in the back of your mind that says, you probably shouldn't do that. Stop and think, there is usually a safer way of performing that function. These machines do not have a brain, please use yours!<br />
<br />
==Woodshop Specific Safety==<br />
# All powered woodcutting and sanding tools must be run with dust collection or vacuum equipment connected to the appropriate ports and on at all times. Do not switch the dust collector on and off without time to cool, if you are planning on working with multiple tools, leave the collector on (repeated quickly turning on and off will overheat the motor).<br />
# Smoke or sparks are bad signs in the woodshop. Stop what you are doing and correct the problem. Usually correct feed and depth of cut or getting a sharp bit / blade will help.<br />
# No metal cutting allowed on woodshop equipment.<br />
# No wet or damp items of any type (including drink containers, rags, or hands) may be placed or left on machine surfaces as they will corrode.<br />
# Do not lean or sit on machinery, these are precision pieces of equipment and you can mis-align them.<br />
# You are responsible for cleaning your machines, your work space, and putting all tools away immediately after use. Scrap wood should be placed in designated locations. Use vacuums or hand brushes to clean machinery.<br />
# Users who consistently fail in their clean-up responsibilities may be denied shop access.<br />
# Do not use stationary equipment work surfaces for sanding, project assembly, layout, applying finishes, etc. Or for uses other than their intended purpose.<br />
# Make sure machines are in the “off” position and motion has stopped, before leaving them after use.<br />
# All safety guards must be kept in place while operating equipment. If a guard or safety device is an impediment to safe operation of a machine - ask for help.<br />
# Use equipment only for its intended use.<br />
# If you have made an adjustment to a piece of equipment, return it to its normal position after you are done.<br />
# Make sure the machine’s work surface is unobstructed and clean before use.<br />
# Always be aware of the proximity of moving machine parts to body parts - fingers.<br />
# Defects in the wood can be dangerous. Check the stock carefully for knots, splits, and other defects. <br />
# Keep the machine clean. Remove all tools, lumber, and unnecessary materials.<br />
# Objects left on the machine can vibrate into revolving cutters. They can then be thrown from the machine with great force. Never clean a machine while it is running.<br />
# All guests are the responsibility of the member, guests are not allowed to use equipment, unless authorized. This is a working shop, so children less than 9 years old are not allowed for safety.<br />
# DO NOT cut anything conductive such as mirrored acrylic, carbon based materials, or laser cutter waste on the Saw Stop tablesaw, the charred areas are carbon and because carbon is conductive, will set off the brake cartridge.<br />
# Member will be responsible for replacing the blade and Sawstop brake if the brake is fired for anything other than a true safety firing. If it is a true safety firing, we will need a photo of the fresh wound and SawStop will evaluate the recorded cartridge memory. If SawStop deems it to be a safety firing, they will need the photo and a release for marketing use and they send a replacement cartridge.<br />
<br />
[https://www.youtube.com/watch?v=u7sRrC2Jpp4 This is a video on table saw kickback]. Do not try this in the woodshop!<br />
<br />
== Equipment List ==<br />
<onlyinclude><br />
{| class="wikitable sortable" ! data-sort-type="Tool"|<br />
|-<br />
! Picture !! What !! Manufacturer !! Model !! Power !! Status<br />
|-<br />
| [[File:Sawstop.jpg|200px]] || [http://www.sawstop.com/images/uploads/manuals/PCS%20Owners%20Manual%20Model%20PCS31230%20V5.0%2009-13.pdf 10" Cabinet Table Saw] || Saw Stop || Professional PCS31230 || 220 || Operational <br />
|-<br />
| [[File:freud_SD508.jpg|200px]] || 8 In. Super Stacked Dado Set 8 x 24 Tooth 1/4" to 29/32“||Freud || SD508|| NA|| Operational <br />
|-<br />
| [[File:Shopfox_jointer.jpg|200px]] || [http://pics.woodstockint.com/manuals/w1741s_m.pdf 8" Carbide Helical Head Jointer] || Shop Fox || W1741S || 220 || Operational<br />
|-<br />
| [[File:Jet_jwp-15hh.jpg|200px]] || [http://content.jettools.com/assets/manuals/708538_man_EN.pdf 15" Carbide Helical Head Planer] || Jet || JWP-15HH || 220 || Operational<br />
|-<br />
| [[File:Jet_jdp-17dx.jpg|200px]] || [[media:17inchDrillPressManual.pdf|17" Drill Press with laser]] || Jet || JDP-17DX || 110 || Operational<br />
|-<br />
| [[File:Jet_jbos-5.jpg|200px]] || [http://content.jettools.com/assets/manuals/708404_man_EN.pdf Oscillating Spindle Sander] || Jet || JBOS-5 || 110 || Operational <br />
|-<br />
| [[File:jet_jwbg-8.jpg|200px]] || [http://content.jettools.com/assets/manuals/726100_man_EN.pdf Low Speed 8" Bench Grinder] || Jet || JWBG-8 || 110 || Operational <br />
|-<br />
| [[File:worksharp_ws3000.jpg|200px]] || [http://www.worksharptools.com/media/mconnect_uploadfiles/p/p/pp0002326_rev_2_ws3000_tri-ling_users_guide.pdf Tool Sharpener] || Work Sharp || WS3000 || 110 || Operational <br />
|-<br />
| [[File:buffer.jpg|200px]] || [[media:8 inch buffer manual.pdf|8" Buffer for Honing]] || Central Machinery || 40668 || 110 || Operational <br />
|-<br />
| [[File:granite.jpg|200px]] || Granite Surface Plate for Sharpening ||9" x 12" x 2" A Grade || Granite Surface Plate|| NA|| Operational <br />
|-<br />
<br />
| [[File:OneidaDustGorilla.jpg|150px]] || [http://www.oneida-air.com/pdf/super-dust-gorilla-owners-manual-cmbn-2014-web.pdf Cyclone Dust Collector] || Oneida Air || 5HP Super Dust Gorilla || 220 || Operational <br />
|-<br />
| [[File:AFS-1000B.jpg|200px]] || [[media:AFS-1000B_manual.pdf|3-speed Remote Control Shop Ambient Dust Filter]] || Jet || AFS-1000B || 110 || Operational <br />
|-<br />
<br />
| [[File:DwaltDW788.jpg|200px]] || [[media:383329-00,DW788.pdf|20" Scroll Saw]] || Dewalt || DW788 || 110 || Operational<br />
|-<br />
| [[File:delta_40-560.jpg|200px]] || [[media:Delta40-560_manual.pdf|16" Two speed Scroll Saw]] || Delta|| 40-560, TY II || 110 || Operational <br />
|-<br />
| [[File: DW331K.jpg|200px]] || [[media: DW331K _manual.pdf|T-slot Jigsaw]] || DeWalt || DW331K || 110 || Operational <br />
|-<br />
| [[File:Skil_4480.jpg|200px]] || [[media:Skil_4480_manual.pdf|Jigsaw]] || Skil|| 4480|| 110 || Operational <br />
|-<br />
| [[File:PC-557.jpg|200px]] || [[media:PC557_manual.pdf|"Biscuit Cutter" Plate Jointer]] || Porter Cable|| 557|| 110 || Operational <br />
|-<br />
| [[File:BoschRouter.png|200px]] || [[media:BoschRouterManual.pdf|2.25HP Router]] || Bosch || 1617EVSPK || 110 || Operational <br />
|-<br />
| [[File: DWP611PK.jpg|200px]] || [[media: DWP611PK_manual.pdf|1.25HP Fixed Base/Plunge Base Router]] || DeWalt || DWP611PK || 110 || Operational<br />
|-<br />
| [[File:Bosch_colt_router.png|200px]] || [[media:Bosch_colt_manual.pdf|1HP Router]] || Bosch || Colt || 110 || Operational<br />
|-<br />
| [[File:4212.jpg|200px]] || [[media:4212_manual.pdf|12" Dovetail Jig]] / [[media:4212_SupplementalManual.pdf|Advanced Supplemental Manual]] || Porter Cable || 4212 || Manual || Operational<br />
|-<br />
| [[File:dremel_MM30.jpg|200px]] || [[media:MM30_manual.pdf|Multi-Max Oscillating Tool]] || Dremel || MM30 || 110 || Operational<br />
|-<br />
| [[File:HitachiFinishNailer.jpg|180px]] || [http://www.hitachipowertools.com/PDF/All/NT50AE2_OM.PDF 2" 18Gauge Finish Nailer] || Hitachi || NT50AE2 || Air || Operational<br />
|-<br />
| [[File:pc_bn125a.jpg|200px]] || [[media:PC_BN125A_manual.pdf|18 Gauge 5/8-1-1/4" Brad Nailer]] || Porter Cable|| BN125A|| Air || Operational<br />
|-<br />
| [[File:Sears_AC.jpg|200px]] || 2HP Air Compressor || Sears|| 20 Gallon|| 220V || Operational<br />
|-<br />
| [[File:Router_table.jpg|200px]] || Router Table || Rockler || || NA || Operational<br />
|-<br />
| [[File:PorterCable7518.jpg|200px]] || [[media:PorterCable7518OwnerManual.pdf|Router Table with JessEm Lift]] || Porter Cable || 7518 || 110 || Operational<br />
|-<br />
| [[File:DW715.jpg|200px]] || [[media:DW715_manual.pdf|12" Single Bevel Miter Saw]] || Dewalt || DW715 || 110 || Operational<br />
|-<br />
| [[File:PowerMatic30b.jpg|200px]] || [[media:PM30_manual.pdf|6x48" Belt/12" Disc sander]] || Powermatic || 30b || 110 || Operational<br />
|-<br />
| [[File:Delta_31-460.jpg|200px]] || [[media:Delta_31-460__manual.pdf|4x36" Belt/5" Disc sander]] || Delta || 31-460 || 110 || Operational<br />
|-<br />
| [[File: DWV012.jpg|200px]] || [[media: DWV012 _manual.pdf|10 gallon HEPA Tool Actuated Self-cleaning Dust Extractor]] || DeWalt || DWV012 || 110 || Operational<br />
|-<br />
| [[File:PC_382_sander.jpg|200px]] || [[media:PC_382_manual.pdf|5 inch 8-hole hook and loop Random Orbit Sander]] || Porter Cable|| 382 || 110 || Operational<br />
|-<br />
| [[File: DWE6421K.jpg|200px]] || [[media: DWE6421K _manual.pdf|5” 8-hole hook and loop random orbit sander]] || DeWalt || DWE6421K || 110 || Operational<br />
|-<br />
| [[File:bosch_1295dvs.jpg|200px]] |||5" 8-Hole variable speed random orbit sander || Bosch|| 1295DVS|| 110 || Operational<br />
|-<br />
| [[File:315279870.jpg|200px]] |||5" 8-Hole Hook & Loop Random Orbit Sander || Craftsman|| 315.279870|| 110 || Operational<br />
|-<br />
| [[File:PC330.jpg|200px]] |||1/4 Sheet Finish Sander || Porter Cable|| 330 Speed Bloc|| 110 || Operational<br />
|-<br />
| [[File:Dremel 1731 sander.jpg|200px]] || 1x30 Belt/5 Disc sander || Dremel|| 1731 || 110 || Operational<br />
|-<br />
| [[File:W1706.jpg|200px]] || [[media:W1706_manual.pdf|14" Bandsaw 93-1/2 inch blade]] || Shop Fox || W1706 14" Enclosed Base || 110 || Operational<br />
|-<br />
| [[File:g0513x2.jpg|200px]] || [[media:g0513x2 manual.pdf|17" Bandsaw Extreme Series 131-1/2 inch blade]] || Grizzly || G0513X2|| 220 || Operational<br />
|-<br />
| [[File:Jet1221VS.jpg|200px]] || [[media:Jet1221VS_manual.pdf|12x43 Electronic Variable Speed Wood Lathe]] || Jet|| 1221VS with extension|| 110 || Operational<br />
|-<br />
| [[File:Oneway_talon.jpg|200px]] || 1X8TPI Wood Lathe Chuck ||Oneway|| Talon|| manual || Operational<br />
|-<br />
| [[File:Nova Mercury Lathe.jpg|200px]] || [[media:Nova Mercury Lathe manual.pdf| Variable Speed 8"x11" Mini Wood Lathe]] || Teknatool ||Nova Mercury || 110 || Operational<br />
|-<br />
| [[File:shopbot_alpha_4x8.jpg|200px]] || 4'x 8' 3 Axis [[Shopbot]] CNC Router|| ShopBot || PRT 96|| 110 || Operational<br />
|-<br />
| [[File:parallel_clamp.jpg|200px]] || 24" (qty 2) & 40" (qty 2) & 48" (qty 2) Clamps || Jorgensen || Cabinet Master Clamps || manual || Operational<br />
|-<br />
| [[File:Jet_clamp.jpg|200px]] || 24" (qty 4) & 31" (qty 2) Clamps || Jet || Parallel Clamps || manual || Operational<br />
|-<br />
| [[File:bessey_tradesman_clamps.jpg|200px]] || 30 piece assortment Clamps|| Bessey || Tradesman Clamps|| manual || Operational<br />
|-<br />
| [[File:bessey deep.jpg|200px]] || Deep reach (qty 2) Clamps|| Bessey || Tradesman Clamps|| manual || Operational<br />
|-<br />
| [[File:Masterforce_clamp.jpg|200px]] || Deep reach 12" (qty 2) & 24" (qty 7) 36" (qty 2) Clamps|| Masterforce || Clamps|| manual || Operational<br />
|-<br />
| [[File:Irwin_quick_clamp.jpg|200px]] || Quick Grip 6" (qty 8) Clamps|| Irwin || Clamps|| manual || Operational<br />
|-<br />
| [[File:bessey strap clamp.jpg|200px]] || High Tension Strap Clamp|| Bessey || VSC|| manual || Operational<br />
|-<br />
| [[File:Kreg-JIg-K5.jpg|200px]] || [[media:K5Manual.pdf|Kreg Jig Pocket Hole Kit]] || Kreg || K5 || manual || Operational <br />
|-<br />
| [[File:DMT_Stone.jpg|200px]] || Diamond sharpening stones|| DMT || 6" x2" fine and extra-fine || manual || Operational <br />
|-<br />
| [[File:mini-hone.jpg|200px]] || Detail diamond honing kit|| DMT || course, fine and extra-fine D2K|| manual || missing from the shop<br />
|-<br />
| [[File:D3246.jpg|200px]] || [[media:D3246_manual.pdf|Tablesaw Tenon Jig (Multi-axis)]]||Shop Fox || D3246|| manual || Operational<br />
|-<br />
| [[File: DCK280C2.jpg|200px]] || [[media: DCK280C2 _manual.pdf|20V cordless ½” drill/driver and Impactor set]] || DeWalt || DCK280C2 || 1.5Ah battery || Operational <br />
|-<br />
| [[File: DCK283D2.jpg|200px]] || [[media: DCK283D2 _manual.pdf|20V Brushless ½” drill/driver and Impactor set]] || DeWalt || DCK283D2 || 1.5Ah battery || Operational <br />
|-<br />
| [[File:Ridgid_wd09450.jpg|200px]] || 9 Gallon Shop Vacuum || Ridgid|| WD09450|| 110 || Operational<br />
|-<br />
| [[File:eagle_1932.jpg|200px]] || 30 Gallon Flammable Liquid Storage Cabinet]] || Eagle|| 1932|| Manual|| Operational<br />
|-<br />
|}<br />
</onlyinclude><br />
<br />
== Commercial Sources for Wood==<br />
<br />
Purchasing hardwood lumber is very different from purchasing construction lumber. Note that Hardwood Lumber is a botanical term and is not related to the relative hardness of the wood. Hardwoods shed their leaves in the fall. Softwoods are evergreen. That is a general rule, and there are exceptions. Note also that Balsa and Basswood are classified as Hardwoods.<br />
<br />
See Wikipedia for [https://en.wikipedia.org/wiki/Lumber#North_American_hardwoods more detail on terms definitions and practices involved in purchasing hardwoods in the US].<br />
<br />
----<br />
=== [https://www.facebook.com/pg/RiverCitySawmill/ River City Sawmill] ===<br />
* Eric Means is a Member of MakeICT. <br />
* Richards Wood Shop<br />
* 147 N Oliver St, Kechi, Kansas<br />
* (316) 200-0512<br />
<br />
=== [https://eldersliewoodworks.com/ Elderslie Woodworks] ===<br />
* 3501 E 101st Street N, Valley Center, KS 67147<br />
* (316) 351-2250<br />
* By Appointment<br />
<br />
=== [https://www.starlumber.com/ Star Lumber] ===<br />
* Hard Wood Stock<br />
* 3700 W Irving St, Wichita, KS 67213<br />
* Main number: (316) 942-2221 (Option 4)<br />
* Yard Number: (316) 941-0144<br />
* Best Directions is West St. S of Kellogg take Irving East to the Yard. Irving is the street on the North side of Maximum Outdoor Equipment.<br />
<br />
=== [http://www.friedenlumber.com/ Mark Frieden Lumber] ===<br />
* 3462 Delaware Rd., Pomona, KS 66076<br />
<br />
=== Intermountain Woods ===<br />
* Wichita Location is closed, but they will service Wichita from other locations<br />
* (801) 486-5414</div>Dominic Canarehttps://wiki.makeict.org/index.php?title=Contact&diff=6128Contact2018-09-21T00:59:19Z<p>Dominic Canare: Redirected page to Contact Information</p>
<hr />
<div>#REDIRECT [[Contact_Information]]</div>Dominic Canarehttps://wiki.makeict.org/index.php?title=Contact_Info&diff=6127Contact Info2018-09-21T00:58:49Z<p>Dominic Canare: Redirected page to Contact Information</p>
<hr />
<div>#REDIRECT [[Contact_Information]]</div>Dominic Canarehttps://wiki.makeict.org/index.php?title=Shopbot&diff=5143Shopbot2017-08-12T00:00:21Z<p>Dominic Canare: </p>
<hr />
<div>[[File:shopbot_alpha_4x8.jpg|200px]]<br />
<br />
The shopbot is a wood CNC router in the [[woodshop]]. We have been teaching introductory classes to the Shopbot and CNC on roughly a monthly basis. Look at the calendar for classes. These are limited in size, and we split into 2 groups to get hands on, each covering the shopbot and one of the two software packages that's being used. <br />
<br />
Note, that like everything in the woodshop, use of the Shopbot requires that you be authorized to use the woodshop, via the class. <br />
<br />
==Software==<br />
There are several ways to generate the g-code required for LinuxCNC to use the shopbot.<br />
<br />
For very simple applications: http://easel.inventables.com/<br />
<br />
For more advanced: http://www.autodesk.com/products/fusion-360/overview<br />
<br />
==Problems==<br />
One problem that has been encountered is that due to trying to keep the feed rate up, the motion planner will cut some corners. To prevent this add the line to your program: "G64 P0.001". This will tell it to keep deviations to less than 0.001 units (mm or in), while still attempting to keep the speed up as much as possible. You can use a higher value if you want to. See here for a more complete discussion as to why that happens: http://linuxcnc.org/docs/2.6/html/common/User_Concepts.html<br />
<br />
==Contacts==<br />
*[[User:James Lancaster|James Lancaster]]<br />
*[[User:Curt Gridley|Curt Gridley]]<br />
<br />
==Resources==<br />
* http://wiki.imal.org/howto/cnc-milling-introduction-cutting-tools<br />
* [[:File:Shopbot Feeds and Speeds Chart.pdf|Shopbot Feeds and Speeds Charts]]<br />
* https://www.onsrud.com/xdoc/feedspeeds<br />
<br />
[[Category:CNC]] [[Category:CNC Router]]</div>Dominic Canarehttps://wiki.makeict.org/index.php?title=File:Shopbot_Feeds_and_Speeds_Chart.pdf&diff=5141File:Shopbot Feeds and Speeds Chart.pdf2017-08-11T23:58:51Z<p>Dominic Canare: Dominic Canare moved page File:Feeds and Speeds Chart.pdf to File:Shopbot Feeds and Speeds Chart.pdf</p>
<hr />
<div></div>Dominic Canarehttps://wiki.makeict.org/index.php?title=File:Feeds_and_Speeds_Chart.pdf&diff=5142File:Feeds and Speeds Chart.pdf2017-08-11T23:58:51Z<p>Dominic Canare: Dominic Canare moved page File:Feeds and Speeds Chart.pdf to File:Shopbot Feeds and Speeds Chart.pdf</p>
<hr />
<div>#REDIRECT [[File:Shopbot Feeds and Speeds Chart.pdf]]</div>Dominic Canarehttps://wiki.makeict.org/index.php?title=File:Shopbot_Feeds_and_Speeds_Chart.pdf&diff=5140File:Shopbot Feeds and Speeds Chart.pdf2017-08-11T23:57:26Z<p>Dominic Canare: </p>
<hr />
<div></div>Dominic Canarehttps://wiki.makeict.org/index.php?title=User:James_A_Seymour&diff=4777User:James A Seymour2017-03-28T00:21:29Z<p>Dominic Canare: </p>
<hr />
<div>[[Category:Area Lead]]<br />
[[File:Picture of James.jpg]]<br />
<br />
= Contact Info =<br />
Email: james.a.seymour@makeict.org<br />
<br />
= About James =<br />
James crashed on this planet during the cretaceous period due to an accident with a hot cup of coffee. Some believe he was partially responsible for the extinction of the dinosaurs, The evolvement of man, and the invention of time travel (which hasn't happened yet.) He is one of the few creatures who are actually more dangerous when bored then when threatened and cornered. As of this writing he holds the records for highest voltage measured, and highest voltage electrical shock. However, at different times. This award winning artist and electrical engineer (the normal kind not the award winning kind) is currently the [[Benevolent Dictator]] over the [[Electronics and Rapid Prototyping]]. His shoot from the hip attitude initially seems irresponsible, but generally isn't. He is quite approachable, however elusive. His interests range from analogue circuits (entire frequency spectrum), programming, optics, lasers, High Voltage, woodworking, and organic chemistry. He won best of show at the WSU photography competition, due to his original style and use of GIMP. He has a blogspot blog [http://hipcatcoolcap.blogspot.com/ Hipcat's Pad] and goes through occasional bouts of updating it. He quotes a lot of pop culture so you may not have seen that movie. Note: Any pun thread James starts is a direct result of [[User:Dominic Canare|Dominic Canare]], so please place blame accordingly.<br />
<br />
<br />
<br />
*MakeICT is not responsible for the validity of the information on this page, nor James' involvement in the evolvement of man.</div>Dominic Canarehttps://wiki.makeict.org/index.php?title=Admin_Tools&diff=4647Admin Tools2017-02-21T01:55:02Z<p>Dominic Canare: </p>
<hr />
<div><div class="toclimit tocshow-1">__TOC__</div><br />
<br />
== Security system ==<br />
=== Access ===<br />
* https://security.makeict.org<br />
* Chief Security Officer and delegates<br />
=== Known issues ===<br />
* https://github.com/makeict/electronic-door/issues?q=is%3Aopen+is%3Aissue+label%3Abug<br />
=== Feature requests ===<br />
* https://github.com/makeict/electronic-door/issues?q=is%3Aopen+is%3Aissue+label%3Aenhancement<br />
<br />
== Orientation Sign in ==<br />
=== Access ===<br />
* [https://accounts.google.com/ServiceLogin?continue=https://script.google.com/macros/s/AKfycbycUxtlhjfHITR_Kp0N-SkzOdpGGVlQEjLNswJ0xkgdmYTswRQ/exec Direct link]<br />
* Administrators, Onboarding team<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Event checkin tool ==<br />
=== Access ===<br />
* [https://accounts.google.com/ServiceLogin?continue=https%3A%2F%2Fscript.google.com%2Fa%2Fmacros%2Fmakeict.org%2Fs%2FAKfycbzTzHbSwgypihr0zcuwAGafle-AhJn2R0vNflNJWVMPfHrFJf8%2Fexec Direct link]<br />
* Administrators, Events team<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Event creation tool ==<br />
=== Access ===<br />
* [https://accounts.google.com/ServiceLogin?continue=https://drive.google.com/drive/folders/0B6OtvVg0pDT7ZVg1WTV3cmN5NlE Windows and Linux downloads]<br />
* Administrators, Makerspace Program Director<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
Once you have the application installed on your computer open it. You will have to log in using your MakeICT.org account. Under the heading there are three choices: Start with a Preset , Copy Existing , and Start from Scratch. The Start with Preset allows you to choose from three profiles: Certification, Workshop, and Class. The Copy Existing allows you to duplicate one of the last several events that were posted. The Start from Scratch gives you a clean default form.<br />
If the person requesting to host an event has filled out the Workshop Proposal Form you should have all the information you need to post the event with exception of a picture to use for the facebook event page. Now your ready to enter the basic information. The name of the event should be brief but informative and should include the name of the presenter. If the event is generic, like a safety class, the name of the presenter is not necessary. If the location is at MakeICT put 1500 E. Douglas in the location field. The description of the event can be taken from the Workshop Proposal (Response) form. It should give details about what the attendee should expect to experience at the event. It should also indicate whether they should bring special materials and if they need to be authorized in a certain area. Simply adding Required authorizations: Woodshop at the bottom of the description will set a flag in the registration to tell the person they need to attend the safety class first.<br />
As they say timing is everything. Enter the date and time of the event. The RSVP settings dictate the cost for members and non-members.<br />
Then in the Cross Posting area you can un-check any of the media check boxes if you do not want that type of post. Otherwise hit Create! and watch the magic happen. Windows will open, you will need to sign in to Wild Apricot, facebook, and Meetup but all the information will be fill out for you. When it's done the windows are left open for you to double check and publish. In the Meetup window scroll to the bottom and click Announce. In the calendar window click on Rooms. ect and choose any rooms or resources that are needed for the event. Then save and close. In the facebook page click Publish. <br />
Close all windows. <br />
Your done. Wasn't that easy :( Well it's better than the old way. Thanks to Dominic Canare for this really helpful tool.<br />
<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Group Copy tool ==<br />
=== Access ===<br />
* [https://accounts.google.com/ServiceLogin?continue=https%3A%2F%2Fscript.google.com%2Fa%2Fmacros%2Fmakeict.org%2Fs%2FAKfycbzQv_mmWN9OzlRs-wigph8Py00R7lX-mzblW4U0SYAxdmQUh2U%2Fexec Direct link]<br />
* Administrators<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Makerspace authorizations tool ==<br />
=== Access ===<br />
* [https://accounts.google.com/ServiceLogin?continue=https%3A%2F%2Fscript.google.com%2Fa%2Fmacros%2Fmakeict.org%2Fs%2FAKfycbwzGVwldpscdPbgdpJ6nyYDPbxYB-Idl7rDoeH_QFN2cnvwmW0%2Fexec Direct Link]<br />
* Administrators, Laser-heads<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Member audit tools ==<br />
=== Access ===<br />
* [https://docs.google.com/spreadsheets/d/1RVOfHRwrt5PKmzcT5Ino3OHQ-U9pcEw8Z_SUt1rWqDg/edit#gid=1476714331 Google Sheets]<br />
* Directors<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Member documentation tool ==<br />
=== Access ===<br />
* [https://accounts.google.com/ServiceLogin?continue=https%3A%2F%2Fscript.google.com%2Fmacros%2Fs%2FAKfycbwCbmbKnX1H-vQes8S_6CCA1wg29mgnPzXSz2PYi6u_y6XA9JIh%2Fexec Direct link]<br />
* Administrators<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* Undo button<br />
* Option to load attendees from multiple events<br />
<br />
== Meeting tasks list ==<br />
=== Access ===<br />
* [http://makeict.org/wiki/Meeting_Tasks Public link on wiki]<br />
=== How to use ===<br />
* Wait for it to load. It's slow; be patient.<br />
* Tasks are grouped by meeting date - each date is a link to the meeting minutes<br />
=== Known issues ===<br />
* Slow as molasses<br />
=== Feature requests ===<br />
* Speed it up<br />
<br />
== Board decisions list ==<br />
=== Access ===<br />
* [http://makeict.org/wiki/Board_Decisions Public link on wiki]<br />
=== How to use ===<br />
* Wait for it to load. It's slow; be patient.<br />
* Decisions are grouped by meeting date - each date is a link to the meeting minutes<br />
=== Known issues ===<br />
* Slow as molasses<br />
=== Feature requests ===<br />
* Speed it up<br />
<br />
<br />
== Board decisions list ==<br />
=== Access ===<br />
* [https://goo.gl/photos/M14PV7jCN297faHQ7 Public link]<br />
=== How to use ===<br />
* Click the link<br />
* Join the folder<br />
* Drag and drop</div>Dominic Canarehttps://wiki.makeict.org/index.php?title=Electronics_and_Rapid_Prototyping&diff=4646Electronics and Rapid Prototyping2017-02-21T00:49:44Z<p>Dominic Canare: /* Equipment Access Policy */</p>
<hr />
<div>{{needs-update|details=missing details and access policies}}<br />
<br />
== General Information ==<br />
MakeICT's Electronics and Rapid Prototyping lab is an enclosed 200 sq ft area. This area has several dedicated spaces. One is for creation of electronics, including a board milling machine, area dedicated for assembly, and reflow oven. Another is for the troubleshooting of electronics, including a hot air rework station, Spectrum Analyzer, Oscilloscope, current limited power supply, and logic analyzer. We have a pair of CNC machines fully capable of handling wood, and some aluminum. We offer Dremmel sets to handle less delicate work (or more delicate depending on your skill.) We also have systems one can check out for the learning of electronics, toolsets to fix and repair, as well as Chip programmers, a bus pirate, Raspberry Pis, Arduinos, even a pic based USB module. We offer a full components library, resplendent with analogue devices, TTL type logic, some rare chipsets, and a full complement of passives. The hackables library is also located here. Here is where you may find the inspiration and starting point for your next blue ribbon hack. This lab is dedicated to creating and debugging electronics, as well as some rapid prototyping capabilities. Never a room to be bored in, the common complaint in this room is, "what do I make first?"<br />
<br />
[[User:James A Seymour|James Seymour]] is the Benevolent Dictator over the electronics and rapid prototyping lab.<br />
<br />
<br />
== Equipment Access Policy ==<br />
<br />
'''THIS POLICY IS NOT YET APPROVED OR OFFICIAL'''<br />
<br />
We prefer a solid understanding of the equipment you are using before use. Certain pieces of equipment are expensive and not easily repaired. Some pieces of equipment can seriously injure or kill you. It never hurts to run what your doing by someone. There are some dangerous pieces of equipment that can burn mutilate or electrocute. These require peer certification, for the user's safety. SAFE OPERATION of equipment is top priority.<br />
<br />
To protect members, any project that exceeds 50V must be clearly labeled "DANGER HIGH VOLTAGE" and will not be left powered up unattended unless wiring is inaccessible to accidental contact. Additionally, the building power panel located on the north wall is considered off limits to members unless they are board appointed personnel. When in doubt, ask.<br />
<br />
We strongly suggest that while machining tools are in operation, anyone entering that part of the shop use personal protective equipment (PPE) such as safety glasses, hearing protection, and hand protection. <br />
<br />
Finally, is HIGHLY recommended that we use a buddy system, where no single person is working in the shop without a second person in the building so that if there is an injury, somebody else is there to call for help or assist you.<br />
<br />
==Borrowing Items==<br />
Currently we do not lend out equipment, but as we build up an inventory of certain items, we may allow checkout similar to a library. Special arrangements may be made on a individual basis, but that is entirely up to the [[User:James A Seymour|BD]].<br />
<br />
==Items for Purchase==<br />
We do have certain items for sale. Sales should be considered final, the money goes back into the ERP Lab.<br />
<br />
==Hackables Policy==<br />
Items donated to the space with the intent of being hacked (or reused in a way that it was not originally intended) should be placed on the middle shelf that is labeled "HACKABLES" by the back door. If there is no room on the shelf try rearranging things to make it fit. If that's not possible please take your items home until some space gets cleared out on the shelf. Every two weeks or as needed a message will be posted on the group list that the shelf will be cleared. Any items on the Hackables shelf are up for grabs by any member. If you just need a part out of a hackable you don't have to take the whole thing. Just place the remainder back on the shelf for someone else to hack. But if there's really nothing good left in it please throw it away.Items that are considered to have long term hackable value can be moved to other work areas with permission of the area[[User:James A Seymour|BD]]. For instance circuit boards that have parts on them that are generally good for circuit building projects can be moved to the ERP area hackables shelves.<br />
The ERP lab BD maintains the hackables inventory. Hackables are up for grabs and may be removed from the shelves at any time. Any questions about hackables can be refereed to the current [[User:James A Seymour|BD]].<br />
<br />
==Component Library==<br />
MakeICT maintains an electronics library. There is currently an inventory of [https://docs.google.com/spreadsheets/d/171x30JJus9XvKBXHagEEe7ZRbp-jYVOvMYQRtwHyMl8/edit?usp=sharing available active components]. This inventory is maintained by volunteers, we ask that you record components you are removing or adding on the clipboard, so that they can be included/subtracted from the inventory. Inventory management is to help the membership, and must rely on the membership. Components in the library are for member use, We only ask you put a buck or two in the donation bucket if you use a lot of them, or some of the rare/complex parts.<br />
<br />
Many of our devices come from dubious sources, MakeICT makes no claim as to their datasheet capabilities, and a certain amount of derateing may be required.<br />
<br />
== Classes ==<br />
* [[Basic Electronics Workshop]]<br />
* [[Circuit Design and Fabrication]]<br />
* [[Rapid Prorotyping with CNC]]<br />
* [[Basic Soldering Class]]<br />
<br />
=== Scopes ===<br />
MakeICT has a few Oscilloscopes. Most notably is the [[Tektronix 465B]] We are fortunate to have some nice ones. Using the Oscilloscope takes some finesse and it's best you have some help with it if you're fairly new to one, so we require certification. The Oscilloscope shows Voltage over time, similar to a graph. There is lots of settings, dials, and switches. if you want to learn to use it just ask to be taught from a reasonably knowledgeable member. <br />
* List of known Scope users is listed below<br />
**[[User:Tom McGuire|Tom McGuire]]<br />
**[[USer:James A Seymour|James Seymour]]<br />
<br />
=== Spectrum Analyzer ===<br />
We have a very nice Spectrum Analyzer ([[Tektronix 492 AP]]). The Spectrum Analyzer shows receive power over frequency. So if you set it properly you would see Peaks where each Wifi network is transmitting. It is easy (and expensive) to damage the input of a Spectrum Analyzer. We ask you are certified and use proper caution. We have several attenuators available for impedance matching, so use them. <br />
* List of known analyzer users is listed below<br />
**[[User:James A Seymour|James Seymour]]<br />
<br />
=== Circuit Design and Fabrication ===<br />
Use of the [[Board Goblin-Circuit Board Mill]] and or [[SMD Circuit Work Station]] requires attendance in the [[Circuit Design and Fabrication]] or certification from an approved peer-certifier. We do not mind if your circuit doesn't work, we do mind if our equipment doesn't.<br />
* Any member who has been certified to use the circuit fabrication equipment may peer-certify other members<br />
* Certification instruction must at least include<br />
** Fundamental knowledge of circuit board milling principles<br />
** Fundamental knowledge of soldering and solder reflow<br />
** Proper use and control of the LinuxCNC software<br />
** Basic circuit design<br />
* Certification must be documented (''link to instructions or form'') prior to use<br />
* List of circuit fabrication users below<br />
**[[User:Tom McGuire|Tom McGuire]]<br />
<br />
=== V90 CNC router ===<br />
Use of the [[V90]] CNC router requires attendance in [[CNC Router certification workshop]]<br />
* Certification must be documented (''link to instructions or form'') prior to use<br />
* List of CNC Router Certified users is listed below<br />
**[[User:Tom McGuire|Tom McGuire]]<br />
<br />
=== 'The Beast' RD-500S II rework Machine ===<br />
The Beast isn't up and running yet. It requres some TLC and is considered a work in progress. Once operational, it is designed to make short work of SMD replacement, by combining a CNC rework station with an on board reflow process. Operation will be mostly peer Certification.<br />
<br />
==Electronics and Rapid Prototyping Safety==<br />
# '''Do not use any machine you are not trained on and comfortable using.''' If at any time you are unsure of what you are doing, stop immediately and ask for help.<br />
# '''Do not use any machine that is not in good working order.''' Stop, unplug and leave a note on the machine and notify the BD OR Tom McGuire.<br />
# '''NEVER ASSUME A TOOL IS PROPERLY ADJUSTED.''' Always check the tool prior to use.<br />
# '''NEVER MODIFY OR HACK MACHINERY WITHOUT CONSENT FROM THE AREA BD.'''<br />
# '''Always triple check your inputs when connecting to equipment. Dangerous levels are dangerous.'''<br />
<br />
== Equipment List ==<br />
<onlyinclude><br />
{| class="wikitable sortable" ! data-sort-type="Tool"|<br />
|-<br />
! Picture !! What !! Manufacturer !! Model !! Power !! Status !! Expert<br />
|-<br />
| [[File:Soldering Iron.jpg|200px]] || [[media:Soldering Tips.pdf|Soldering iron]] ||Various || Various || 110 || Working || [[User:James A Seymour|James Seymour]]<br />
|-<br />
| [[File:RD500 II photo.jpg|200px]] || Rework System ||Den-on Instruments || [[media:RD-500 II rework station manual.pdf|RD-500S II]] || 110 || Not yet || [[User:James A Seymour|James Seymour]]<br />
|-<br />
| [[File:TEK1240.jpg|200px]] || [[media:RD-500 II rework station manual.pdf|Logic Analyzer]] ||Tektronix || 1240|| 110 || Working || [[User:James A Seymour|James Seymour]]<br />
|-<br />
| [[File:TEK492P.jpg|200px]] || [[Tektronix 492 AP|Oscilliscope]] ||Tektronix || 492P || 110 || Working || [[User:James A Seymour|James Seymour]]<br />
|-<br />
| [[File:TEK465B.jpg|200px]] || [[Tektronix 465B|Oscilloscope]] ||Tektronix|| 465B|| 110 || Working || [[User:James A Seymour|James Seymour]]<br />
|-<br />
| [[File:Fluke_867.jpg|200px]] || [[media:Fluke867_manual.pdf|Graphical Multimeter]] ||Fluke|| 867|| 9V || Working || [[User:James A Seymour|James Seymour]]<br />
|-<br />
| [[File:Fluke_117.jpg|200px]] || [[media:Fluke117_manual.pdf|True RMS Non-contact Multimeter]] ||Fluke|| 117|| 9V || Working || [[User:James A Seymour|James Seymour]]<br />
|-<br />
| [[File:Fluke_80K-40.jpg|200px]] || [[media:Fluke_80K-40_manual.pdf|High Voltage Probe]] ||Fluke|| 80K-40|| NA || Working || [[User:James A Seymour|James Seymour]]<br />
|-<br />
| [[File:Fluke_80i-1010.jpg|200px]] || [|Clamp on DC/AC Current Probe]] ||Fluke|| 80i-1010|| 1-1000 Adc, 1-600Aac (1 mV/A) || Working || [[User:James A Seymour|James Seymour]]<br />
|-<br />
| [[File:QS-5100.jpg|200px]] || [[Qinsi QS-5100 IR reflow oven|Lead Free Reflow Oven]] ||Qinsi Technology || QS-5100|| 110 || Working || [[User:James A Seymour|James Seymour]]<br />
|-<br />
| [[File:arksen992D.jpg|200px]] || [[media:RD-500 II rework station manual.pdf|Soldering Station with Heat Gun]] ||Arksen || 992D|| 110 || Working || [[User:James A Seymour|James Seymour]]<br />
|-<br />
| [[File:Board Goblin.jpg|200px]] || [[Board Goblin-Circuit Board Mill]] || [[User:Tom McGuire|Tom McGuire]] || 47158|| 110 || Working || [[User:Tom McGuire|Tom McGuire]]<br />
|-<br />
| [[File:Fireball_v90.jpg|200px]] || CNC Mill || Probotix || [[V90|Fireball V90]] || 110 || Working || [[User:Tom McGuire|Tom McGuire]]<br />
|-<br />
| [[File:Sherline 5400 Mill.jpg|200px]] || CNC Mill || Sherline || [[Sherline CNC Mill]] || 110 || Working || [[User:James Lancaster|James Lancaster]] [[User:Christian Kindel|Christian Kindel]] <br />
|-<br />
| [[File:CSI Speco PSV5.jpg|200px]] || Variable power supply || SPECO || [[SPECO PSV-5|PSV-5]] || 110 || Under Repair [[SPECO PSV-5 repair log]] || [[User:James A Seymour|James Seymour]]<br />
|-<br />
| [[File:EICO_377.jpg|200px]] || Audio Waveform Generator || EICO || [[377]] || 110 || Not Working || [[User:James A Seymour|James Seymour]]<br />
|-<br />
| [[File:UDB100X.jpg|200px]] || 5Mhz Tone Generator || MingHe || [[UDB1005S]] || 110 || In-Work || [[User:Mike Barushok|Mike Barushok]]<br />
|-<br />
|}<br />
</onlyinclude><br />
*Policies may change with the needs of the department and may go into affect before this page is updated to reflect it.</div>Dominic Canarehttps://wiki.makeict.org/index.php?title=File:Logo-type.eps&diff=4556File:Logo-type.eps2017-01-03T01:23:07Z<p>Dominic Canare: Dominic Canare uploaded a new version of File:Logo-type.eps</p>
<hr />
<div></div>Dominic Canarehttps://wiki.makeict.org/index.php?title=File:Logo-secondary.eps&diff=4555File:Logo-secondary.eps2017-01-03T01:22:54Z<p>Dominic Canare: Dominic Canare uploaded a new version of File:Logo-secondary.eps</p>
<hr />
<div></div>Dominic Canarehttps://wiki.makeict.org/index.php?title=File:Logo-primary.eps&diff=4554File:Logo-primary.eps2017-01-03T01:22:39Z<p>Dominic Canare: Dominic Canare uploaded a new version of File:Logo-primary.eps</p>
<hr />
<div></div>Dominic Canarehttps://wiki.makeict.org/index.php?title=File:MakeICT-wallpaper-light.png&diff=4551File:MakeICT-wallpaper-light.png2017-01-03T00:04:35Z<p>Dominic Canare: Dominic Canare uploaded a new version of File:MakeICT-wallpaper-light.png</p>
<hr />
<div></div>Dominic Canarehttps://wiki.makeict.org/index.php?title=File:Logo-primary.svg&diff=4550File:Logo-primary.svg2017-01-03T00:03:51Z<p>Dominic Canare: Dominic Canare uploaded a new version of File:Logo-primary.svg</p>
<hr />
<div></div>Dominic Canarehttps://wiki.makeict.org/index.php?title=File:Logo-type.svg&diff=4549File:Logo-type.svg2017-01-03T00:03:13Z<p>Dominic Canare: Dominic Canare uploaded a new version of File:Logo-type.svg</p>
<hr />
<div></div>Dominic Canarehttps://wiki.makeict.org/index.php?title=File:Logo-secondary.svg&diff=4548File:Logo-secondary.svg2017-01-03T00:02:17Z<p>Dominic Canare: Dominic Canare uploaded a new version of File:Logo-secondary.svg</p>
<hr />
<div></div>Dominic Canarehttps://wiki.makeict.org/index.php?title=File:Logo-primary.svg&diff=4547File:Logo-primary.svg2017-01-03T00:01:22Z<p>Dominic Canare: Dominic Canare uploaded a new version of File:Logo-primary.svg</p>
<hr />
<div></div>Dominic Canarehttps://wiki.makeict.org/index.php?title=File:Logo-primary.svg&diff=4546File:Logo-primary.svg2017-01-03T00:01:00Z<p>Dominic Canare: Dominic Canare uploaded a new version of File:Logo-primary.svg</p>
<hr />
<div></div>Dominic Canarehttps://wiki.makeict.org/index.php?title=Textiles_Area&diff=4404Textiles Area2016-12-04T20:09:50Z<p>Dominic Canare: /* Access Policy */</p>
<hr />
<div>== General Information ==<br />
MakeICT's Textiles area is in the front part of the Makerspace, and is intended for making textiles. It will have several home sewing machines, small looms, irons, padded work table for ironing and pinning, a fold down murphy cutting board, mannequins, a full-length 3-way mirror, a serger, a commercial sewing machine, and more. <br />
<br />
This area is currently accepting donations in the form of fabric, thread, machine needles, sewing/fabric scissors/shears, large lint rollers, distilled water, sewing notions (such as zippers, buttons, etc), adjustable dress forms & mannequins, pins, bobbins, hand sewing needles, yarn, tape measures. etc. <br />
<br />
[[User:Jess Bechtelheimer|Jess Bechtelheimer]] is the Benevolent Dictator over studio arts.<br />
<br />
==Access Policy==<br />
(Approved by the board 2016 December 04)<br />
<br />
Those who wish to access the textile room must read and follow the Textile Room Guidelines posted on the Wiki. (The guidelines will likely be updated and evolve over time. Users are expected to review and comply with the current guidelines.) Use of the equipment requires authorization by one of the approved authorizers listed on the wiki.<br />
<br />
==Textile Room Guidelines==<br />
Guidelines will be updated periodically at the discretion of the Textile BD.<br />
<br />
The Room<br />
*The Textile Room is a CLEAN SPACE. No food, drinks, or any other messy/dirty/liquidy/greasy substances including yourself are allowed in the room.<br />
In particular, do not place anything besides the clothes iron, clean laundered fabric, pins and notions on the padded work table. If something has been on the floor or anywhere dirty, it should not be on the work surface.<br />
*Put things back where you got them (or put them in their proper place if someone else happened to leave them out).<br />
*Clean up after yourself. (Lint roll the table, sweep, etc)<br />
*Children under 8 are not permitted in the room.<br />
<br />
<br />
Ironing:<br />
*The padded table is for ironing and pinning projects together. Do not cut fabric on the padded surface. <br />
*Always use the distilled water provided in the Textile Room to fill the irons and spray bottles.<br />
*When using steam you may want to use a barrier fabric to prevent color transfer from the table fabric to your project.<br />
<br />
<br />
Cutting:<br />
*Do not cut fabric on the padded table. To cut fabric, lower the Murphy Cutting Board so it lays flat on top of the padded work table and only cut on the cutting board itself.<br />
*Textile scissors and shears have been labeled as “Fabric Only” and are only to be used to cut the following Acceptable Fabrics. Do not cut material from the Unacceptable Fabrics list below. If the material you would like to cut is not on either list, ask the Area Lead if it is safe.<br />
'''Acceptable Fabrics''': are woven or felted up to ⅛” thick. Some examples are cotton, linen, wool, cashmere, polyester, rayon/viscose, nylon, spandex, silk, leather...<br />
<br />
'''Unacceptable Fabrics''': Some examples are burlap, metallic, kevlar, fur, faux fur, or anything above 12 oz per square yard… (Fur and faux fur are cut from the back side with a straight edge knife or ripped on grain.) <br />
<br />
<br />
<br />
Sewing:<br />
*All our current machines are previously loved and have some quirks. We will try our best to keep information on each machine on the wiki. If you learn something about a machine that is not listed, please let us know.<br />
*If a machine is broken, place a sticky note on the machine and email the Area Lead asap so we can work to get it up and running again.<br />
*Machine needles are available on the honor system for $1 each. Machines will typically be found without a needle. If you take or break one, please deposit the appropriate amount in the Needle Fund jar.<br />
*Long pile furs such as rabbit require a furrier machine which we do not possess at this time.<br />
*If using a fusible web such as Heat and Bond please use silicone on the machine needle to prevent build up while sewing. <br />
<br />
<br />
<br />
== Equipment List == <br />
<onlyinclude><br />
{| class="wikitable sortable" ! data-sort-type="Tool"|<br />
|-<br />
! Picture !! What !! Manufacturer !! Model !! Status !! Authorizers<br />
|-<br />
| [[File:WhiteSewingMachine.jpg|200px]] || [[media:White-954-Manual.pdf|White 954 Sewing Machine]] ||White|| 954 || Working || [[User:Jess Bechtelheimer|Jess Bechtelheimer]] <br />
Malissa Long<br />
|-<br />
| [[File:KenmoreSewingMachine.jpg|200px]] || [[media:https://drive.google.com/open?id=0B_5Gvzgv8y6uNXdlZFZ2QW9pZU9oNXRwdWNMWXBLa1g5YXU0|Kenmore Sewing Machine]] ||Kenmore|| 10690 || Not Working || [[User:Jess Bechtelheimer|--]] <br />
|-<br />
| [[File:DeLuxSewingMachine.jpg|200px]] || De Lux Sewing Machine ||New Home|| De Lux || Working-ish || [[User:Jess Bechtelheimer|Jess Bechtelheimer]] <br />
Malissa Long<br />
|-<br />
| [[File:SingerSewingMachine.jpg|200px]] || [[media:http://www.singerco.com/uploads/download/0a7c4acf373c8dacb836ecfbcd0c5f18f880cf0d.pdf|Singer 3223 Sewing Machine]] ||Singer|| 3223 || Working || [[User:Jess Bechtelheimer|Jess Bechtelheimer]] <br />
Malissa Long<br />
|-<br />
| [[File:SewingWorkTable.jpg|200px]] || Padded Work Table || Geoff & Jess || 001 || Good Condition || NA - Read Guidelines<br />
|-<br />
| || Iron ||??|| ?? || Working || NA - Read Guidelines<br />
|-<br />
| || Iron ||??|| ?? || Working || NA - Read Guidelines<br />
|-<br />
| || Murphy Cutting Board || Geoff & Jess || 001 || Not yet installed || NA - Read Guidelines<br />
|-<br />
|}<br />
</onlyinclude></div>Dominic Canarehttps://wiki.makeict.org/index.php?title=Textiles_Area&diff=4403Textiles Area2016-12-04T20:09:21Z<p>Dominic Canare: /* Access Policy */</p>
<hr />
<div>== General Information ==<br />
MakeICT's Textiles area is in the front part of the Makerspace, and is intended for making textiles. It will have several home sewing machines, small looms, irons, padded work table for ironing and pinning, a fold down murphy cutting board, mannequins, a full-length 3-way mirror, a serger, a commercial sewing machine, and more. <br />
<br />
This area is currently accepting donations in the form of fabric, thread, machine needles, sewing/fabric scissors/shears, large lint rollers, distilled water, sewing notions (such as zippers, buttons, etc), adjustable dress forms & mannequins, pins, bobbins, hand sewing needles, yarn, tape measures. etc. <br />
<br />
[[User:Jess Bechtelheimer|Jess Bechtelheimer]] is the Benevolent Dictator over studio arts.<br />
<br />
==Access Policy==<br />
Those who wish to access the textile room must read and follow the Textile Room Guidelines posted on the Wiki. (The guidelines will likely be updated and evolve over time. Users are expected to review and comply with the current guidelines.) Use of the equipment requires authorization by one of the approved authorizers listed on the wiki.<br />
<br />
==Textile Room Guidelines==<br />
Guidelines will be updated periodically at the discretion of the Textile BD.<br />
<br />
The Room<br />
*The Textile Room is a CLEAN SPACE. No food, drinks, or any other messy/dirty/liquidy/greasy substances including yourself are allowed in the room.<br />
In particular, do not place anything besides the clothes iron, clean laundered fabric, pins and notions on the padded work table. If something has been on the floor or anywhere dirty, it should not be on the work surface.<br />
*Put things back where you got them (or put them in their proper place if someone else happened to leave them out).<br />
*Clean up after yourself. (Lint roll the table, sweep, etc)<br />
*Children under 8 are not permitted in the room.<br />
<br />
<br />
Ironing:<br />
*The padded table is for ironing and pinning projects together. Do not cut fabric on the padded surface. <br />
*Always use the distilled water provided in the Textile Room to fill the irons and spray bottles.<br />
*When using steam you may want to use a barrier fabric to prevent color transfer from the table fabric to your project.<br />
<br />
<br />
Cutting:<br />
*Do not cut fabric on the padded table. To cut fabric, lower the Murphy Cutting Board so it lays flat on top of the padded work table and only cut on the cutting board itself.<br />
*Textile scissors and shears have been labeled as “Fabric Only” and are only to be used to cut the following Acceptable Fabrics. Do not cut material from the Unacceptable Fabrics list below. If the material you would like to cut is not on either list, ask the Area Lead if it is safe.<br />
'''Acceptable Fabrics''': are woven or felted up to ⅛” thick. Some examples are cotton, linen, wool, cashmere, polyester, rayon/viscose, nylon, spandex, silk, leather...<br />
<br />
'''Unacceptable Fabrics''': Some examples are burlap, metallic, kevlar, fur, faux fur, or anything above 12 oz per square yard… (Fur and faux fur are cut from the back side with a straight edge knife or ripped on grain.) <br />
<br />
<br />
<br />
Sewing:<br />
*All our current machines are previously loved and have some quirks. We will try our best to keep information on each machine on the wiki. If you learn something about a machine that is not listed, please let us know.<br />
*If a machine is broken, place a sticky note on the machine and email the Area Lead asap so we can work to get it up and running again.<br />
*Machine needles are available on the honor system for $1 each. Machines will typically be found without a needle. If you take or break one, please deposit the appropriate amount in the Needle Fund jar.<br />
*Long pile furs such as rabbit require a furrier machine which we do not possess at this time.<br />
*If using a fusible web such as Heat and Bond please use silicone on the machine needle to prevent build up while sewing. <br />
<br />
<br />
<br />
== Equipment List == <br />
<onlyinclude><br />
{| class="wikitable sortable" ! data-sort-type="Tool"|<br />
|-<br />
! Picture !! What !! Manufacturer !! Model !! Status !! Authorizers<br />
|-<br />
| [[File:WhiteSewingMachine.jpg|200px]] || [[media:White-954-Manual.pdf|White 954 Sewing Machine]] ||White|| 954 || Working || [[User:Jess Bechtelheimer|Jess Bechtelheimer]] <br />
Malissa Long<br />
|-<br />
| [[File:KenmoreSewingMachine.jpg|200px]] || [[media:https://drive.google.com/open?id=0B_5Gvzgv8y6uNXdlZFZ2QW9pZU9oNXRwdWNMWXBLa1g5YXU0|Kenmore Sewing Machine]] ||Kenmore|| 10690 || Not Working || [[User:Jess Bechtelheimer|--]] <br />
|-<br />
| [[File:DeLuxSewingMachine.jpg|200px]] || De Lux Sewing Machine ||New Home|| De Lux || Working-ish || [[User:Jess Bechtelheimer|Jess Bechtelheimer]] <br />
Malissa Long<br />
|-<br />
| [[File:SingerSewingMachine.jpg|200px]] || [[media:http://www.singerco.com/uploads/download/0a7c4acf373c8dacb836ecfbcd0c5f18f880cf0d.pdf|Singer 3223 Sewing Machine]] ||Singer|| 3223 || Working || [[User:Jess Bechtelheimer|Jess Bechtelheimer]] <br />
Malissa Long<br />
|-<br />
| [[File:SewingWorkTable.jpg|200px]] || Padded Work Table || Geoff & Jess || 001 || Good Condition || NA - Read Guidelines<br />
|-<br />
| || Iron ||??|| ?? || Working || NA - Read Guidelines<br />
|-<br />
| || Iron ||??|| ?? || Working || NA - Read Guidelines<br />
|-<br />
| || Murphy Cutting Board || Geoff & Jess || 001 || Not yet installed || NA - Read Guidelines<br />
|-<br />
|}<br />
</onlyinclude></div>Dominic Canarehttps://wiki.makeict.org/index.php?title=November_13_2016&diff=4394November 13 20162016-11-30T19:47:51Z<p>Dominic Canare: Created page with "== Roll Call == * Board Members ** Logan Pajunen ** John Alexander ** Kip Landwehr ** Tracy Hoover ** Dominic Canare ** James Lancaster ** Curt Gridley * Members ** Tom McGuir..."</p>
<hr />
<div>== Roll Call ==<br />
* Board Members<br />
** Logan Pajunen<br />
** John Alexander<br />
** Kip Landwehr<br />
** Tracy Hoover<br />
** Dominic Canare<br />
** James Lancaster<br />
** Curt Gridley<br />
* Members<br />
** Tom McGuire<br />
** Sam Schurter<br />
** Jeremiah Burian<br />
** David Springs<br />
** Jeff Eck<br />
** Jerry Carpenter<br />
<br />
== Officer Reports ==<br />
* Secretary: Acceptance of [[October 10 2016|previous meeting minutes]]<br />
** {{decision|Meeting minutes for October 10, 2016, are accepted.}}<br />
<br />
* Treasurer's Report<br />
** Accrual vs Cash Accounting discussion<br />
** {{todo|who=Dom|what=Recruit a volunteer to work with Tracy to review accrual vs cash accounting|done=0}}<br />
<br />
<br />
== Old business ==<br />
* Area Lead access policy draft document<br />
** {{todo|who=Kip|what=Link copy of draft document|done=0}}<br />
** Proposed Amendment: Add a bullet that states: "Failure to abide by these policies may result in removal from area lead position."<br />
** Proposed Amendment: Change the terms "signed-off" to "authorized"<br />
** {{todo|who=Logan|when=Before end of day (Nov 13)|what=Determine where each of these bullet points will go in the existing policies and send an email to approve the changes|done=0}}<br />
<br />
* Area Lead selection process <br />
** Reduce Area Lead count?<br />
*** Group some areas together and have one Lead for all of them so they work together more?<br />
*** Tracy: "No convincing argument from either side, but we need to remain open"<br />
*** Deadline for people to express interest in being an Area Lead is November 28.<br />
*** Need to ask Area Leads if they’re interested in continuing.<br />
** Distinct Areas that should have a defined Area Lead call<br />
** Fablab - Yes<br />
** Woodshop - Yes<br />
** Metal shop - Yes<br />
** Ceramics - Yes<br />
** Electronics - Yes<br />
** Print making - Yes<br />
** Textiles - Yes<br />
** CNC = Tormach + Shopbot - Yes<br />
*** Interested individuals could be assistant BD’s if we don’t name this as a separate area<br />
** Jewelry - Yes<br />
*** Interested individuals could be assistant BD’s if we don’t name this as a separate area<br />
** Facilities - Yes<br />
*** Kitchen<br />
*** Lounge<br />
*** Classroom<br />
*** Co-working<br />
*** Bathrooms<br />
*** Technology<br />
*** Security<br />
** Gallery - Yes<br />
*** Each show in the gallery needs to have specific, hard start and stop dates<br />
**** While a show is in place, the gallery is a gallery and should not be re-arranged or repurposed<br />
**** While a show is not in place, the gallery is shared workspace<br />
<br />
* Motion to change "Benevolent dictators" to "area leads"<br />
** {{decision|Benevolent dictators will now be referred to as "Area Leads"}}<br />
** Motion passes with 2 opposed<br />
* Preliminary budget draft review by Treasurer<br />
** Received budget information from several areas.<br />
** Areas that have not yet submitted a budget are blank on Tracy’s budget docs.<br />
** Need a working meeting with all the Area Leads to hash out the area budgets?<br />
*** {{todo|who=Tracy|what=Contact each Area Lead and setup times to work with them on Saturday the 19th|done=1}}<br />
** Will need a meeting of the Board to approve the area budgets<br />
<br />
== New business ==<br />
* Exploration Place Maker Faire partnership with Jan Luth<br />
** {{todo|who=Kip|what=Link Partnership Agreement}}<br />
** Curt: "We need to make sure we have backing in our organization before we commit to this."<br />
*** Proposal: recruit and build committee before signing formal agreement<br />
** Concern: how much / do we need to budget for this<br />
* Outreach Director<br />
** Can we find a non Board member to be the director of Outreach?<br />
** {{todo|who=Logan|what=Talk with Barb to find suitable director for Outreach|done=0}}<br />
* Makerspace director<br />
** Let’s redefine this position to include the things that it’s currently doing (resource scheduling), and exclude the things it doesn’t currently do: area-lead management<br />
** Org chart: this would make it a sibling to BD’s (who would then be directly under the board), instead of a parent<br />
* KLF Director appointment process<br />
<br />
== Decision Summary ==<br />
{{decision-summary}}<br />
<br />
== Task Summary ==<br />
{{todo-summary}}</div>Dominic Canarehttps://wiki.makeict.org/index.php?title=Admin_Tools&diff=4372Admin Tools2016-11-21T14:43:04Z<p>Dominic Canare: </p>
<hr />
<div><div class="toclimit tocshow-1">__TOC__</div><br />
<br />
== Security system ==<br />
=== Access ===<br />
* https://security.makeict.org<br />
* Chief Security Officer and delegates<br />
=== Known issues ===<br />
* https://github.com/makeict/electronic-door/issues?q=is%3Aopen+is%3Aissue+label%3Abug<br />
=== Feature requests ===<br />
* https://github.com/makeict/electronic-door/issues?q=is%3Aopen+is%3Aissue+label%3Aenhancement<br />
<br />
== Orientation Sign in ==<br />
=== Access ===<br />
* [https://accounts.google.com/ServiceLogin?continue=https://script.google.com/macros/s/AKfycbycUxtlhjfHITR_Kp0N-SkzOdpGGVlQEjLNswJ0xkgdmYTswRQ/exec Direct link]<br />
* Administrators, Onboarding team<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Event checkin tool ==<br />
=== Access ===<br />
* [https://accounts.google.com/ServiceLogin?continue=https%3A%2F%2Fscript.google.com%2Fa%2Fmacros%2Fmakeict.org%2Fs%2FAKfycbzTzHbSwgypihr0zcuwAGafle-AhJn2R0vNflNJWVMPfHrFJf8%2Fexec Direct link]<br />
* Administrators, Events team<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Event creation tool ==<br />
=== Access ===<br />
* [https://accounts.google.com/ServiceLogin?continue=https://drive.google.com/drive/folders/0B6OtvVg0pDT7ZVg1WTV3cmN5NlE Windows and Linux downloads]<br />
* Administrators, Makerspace Program Director<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
Once you have the application installed on your computer open it. You will have to log in using your MakeICT.org account. Under the heading there are three choices: Start with a Preset , Copy Existing , and Start from Scratch. The Start with Preset allows you to choose from three profiles: Certification, Workshop, and Class. The Copy Existing allows you to duplicate one of the last several events that were posted. The Start from Scratch gives you a clean default form.<br />
If the person requesting to host an event has filled out the Workshop Proposal Form you should have all the information you need to post the event with exception of a picture to use for the facebook event page. Now your ready to enter the basic information. The name of the event should be brief but informative and should include the name of the presenter. If the event is generic, like a safety class, the name of the presenter is not necessary. If the location is at MakeICT put 1500 E. Douglas in the location field. The description of the event can be taken from the Workshop Proposal (Response) form. It should give details about what the attendee should expect to experience at the event. It should also indicate whether they should bring special materials and if they need to be authorized in a certain area. Simply adding Required authorizations: Woodshop at the bottom of the description will set a flag in the registration to tell the person they need to attend the safety class first.<br />
As they say timing is everything. Enter the date and time of the event. The RSVP settings dictate the cost for members and non-members.<br />
Then in the Cross Posting area you can un-check any of the media check boxes if you do not want that type of post. Otherwise hit Create! and watch the magic happen. Windows will open, you will need to sign in to Wild Apricot, facebook, and Meetup but all the information will be fill out for you. When it's done the windows are left open for you to double check and publish. In the Meetup window scroll to the bottom and click Announce. In the calendar window click on Rooms. ect and choose any rooms or resources that are needed for the event. Then save and close. In the facebook page click Publish. <br />
Close all windows. <br />
Your done. Wasn't that easy :( Well it's better than the old way. Thanks to Dominic Canare for this really helpful tool.<br />
<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Group Copy tool ==<br />
=== Access ===<br />
* [https://accounts.google.com/ServiceLogin?continue=https%3A%2F%2Fscript.google.com%2Fa%2Fmacros%2Fmakeict.org%2Fs%2FAKfycbzQv_mmWN9OzlRs-wigph8Py00R7lX-mzblW4U0SYAxdmQUh2U%2Fexec Direct link]<br />
* Administrators<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Makerspace authorizations tool ==<br />
=== Access ===<br />
* [https://accounts.google.com/ServiceLogin?continue=https%3A%2F%2Fscript.google.com%2Fa%2Fmacros%2Fmakeict.org%2Fs%2FAKfycbwzGVwldpscdPbgdpJ6nyYDPbxYB-Idl7rDoeH_QFN2cnvwmW0%2Fexec Direct Link]<br />
* Administrators, Laser-heads<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Member audit tools ==<br />
=== Access ===<br />
* [https://docs.google.com/spreadsheets/d/1RVOfHRwrt5PKmzcT5Ino3OHQ-U9pcEw8Z_SUt1rWqDg/edit#gid=1476714331 Google Sheets]<br />
* Directors<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Member documentation tool ==<br />
=== Access ===<br />
* [https://accounts.google.com/ServiceLogin?continue=https%3A%2F%2Fscript.google.com%2Fmacros%2Fs%2FAKfycbwCbmbKnX1H-vQes8S_6CCA1wg29mgnPzXSz2PYi6u_y6XA9JIh%2Fexec Direct link]<br />
* Administrators<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* Undo button<br />
* Option to load attendees from multiple events<br />
<br />
== Meeting tasks list ==<br />
=== Access ===<br />
* [http://makeict.org/wiki/Meeting_Tasks Public link on wiki]<br />
=== How to use ===<br />
* Wait for it to load. It's slow; be patient.<br />
* Tasks are grouped by meeting date - each date is a link to the meeting minutes<br />
=== Known issues ===<br />
* Slow as molasses<br />
=== Feature requests ===<br />
* Speed it up<br />
<br />
== Board decisions list ==<br />
=== Access ===<br />
* [http://makeict.org/wiki/Board_Decisions Public link on wiki]<br />
=== How to use ===<br />
* Wait for it to load. It's slow; be patient.<br />
* Decisions are grouped by meeting date - each date is a link to the meeting minutes<br />
=== Known issues ===<br />
* Slow as molasses<br />
=== Feature requests ===<br />
* Speed it up</div>Dominic Canarehttps://wiki.makeict.org/index.php?title=Admin_Tools&diff=4371Admin Tools2016-11-21T14:42:00Z<p>Dominic Canare: </p>
<hr />
<div><div class="toclimit tocshow-1">__TOC__</div><br />
<br />
== Security system ==<br />
=== Access ===<br />
* https://security.makeict.org<br />
* Chief Security Officer and delegates<br />
=== Known issues ===<br />
* https://github.com/makeict/electronic-door/issues?q=is%3Aopen+is%3Aissue+label%3Abug<br />
=== Feature requests ===<br />
* https://github.com/makeict/electronic-door/issues?q=is%3Aopen+is%3Aissue+label%3Aenhancement<br />
<br />
== Orientation Sign in ==<br />
=== Access ===<br />
* [https://accounts.google.com/ServiceLogin?continue=https://script.google.com/macros/s/AKfycbycUxtlhjfHITR_Kp0N-SkzOdpGGVlQEjLNswJ0xkgdmYTswRQ/exec Direct link]<br />
* Administrators, Onboarding team<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Event checkin tool ==<br />
=== Access ===<br />
* [https://accounts.google.com/ServiceLogin?continue=https%3A%2F%2Fscript.google.com%2Fa%2Fmacros%2Fmakeict.org%2Fs%2FAKfycbzTzHbSwgypihr0zcuwAGafle-AhJn2R0vNflNJWVMPfHrFJf8%2Fexec Direct link]<br />
* Administrators, Events team<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Event creation tool ==<br />
=== Access ===<br />
* [https://accounts.google.com/ServiceLogin?continue=https://drive.google.com/drive/folders/0B6OtvVg0pDT7ZVg1WTV3cmN5NlE Windows and Linux downloads]<br />
* Administrators, Makerspace Program Director<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
Once you have the application installed on your computer open it. You will have to log in using your MakeICT.org account. Under the heading there are three choices: Start with a Preset , Copy Existing , and Start from Scratch. The Start with Preset allows you to choose from three profiles: Certification, Workshop, and Class. The Copy Existing allows you to duplicate one of the last several events that were posted. The Start from Scratch gives you a clean default form.<br />
If the person requesting to host an event has filled out the Workshop Proposal Form you should have all the information you need to post the event with exception of a picture to use for the facebook event page. Now your ready to enter the basic information. The name of the event should be brief but informative and should include the name of the presenter. If the event is generic, like a safety class, the name of the presenter is not necessary. If the location is at MakeICT put 1500 E. Douglas in the location field. The description of the event can be taken from the Workshop Proposal (Response) form. It should give details about what the attendee should expect to experience at the event. It should also indicate whether they should bring special materials and if they need to be authorized in a certain area. Simply adding Required authorizations: Woodshop at the bottom of the description will set a flag in the registration to tell the person they need to attend the safety class first.<br />
As they say timing is everything. Enter the date and time of the event. The RSVP settings dictate the cost for members and non-members.<br />
Then in the Cross Posting area you can un-check any of the media check boxes if you do not want that type of post. Otherwise hit Create! and watch the magic happen. Windows will open, you will need to sign in to Wild Apricot, facebook, and Meetup but all the information will be fill out for you. When it's done the windows are left open for you to double check and publish. In the Meetup window scroll to the bottom and click Announce. In the calendar window click on Rooms. ect and choose any rooms or resources that are needed for the event. Then save and close. In the facebook page click Publish. <br />
Close all windows. <br />
Your done. Wasn't that easy :( Well it's better than the old way. Thanks to Dominic Canare for this really helpful tool.<br />
<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Group Copy tool ==<br />
=== Access ===<br />
* [https://accounts.google.com/ServiceLogin?continue=https%3A%2F%2Fscript.google.com%2Fa%2Fmacros%2Fmakeict.org%2Fs%2FAKfycbzQv_mmWN9OzlRs-wigph8Py00R7lX-mzblW4U0SYAxdmQUh2U%2Fexec Direct link]<br />
* Administrators<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Makerspace authorizations tool ==<br />
=== Access ===<br />
* [https://accounts.google.com/ServiceLogin?continue=https%3A%2F%2Fscript.google.com%2Fa%2Fmacros%2Fmakeict.org%2Fs%2FAKfycbwzGVwldpscdPbgdpJ6nyYDPbxYB-Idl7rDoeH_QFN2cnvwmW0%2Fexec Direct Link]<br />
* Administrators, Laser-heads<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Member audit tools ==<br />
=== Access ===<br />
* [https://docs.google.com/spreadsheets/d/1RVOfHRwrt5PKmzcT5Ino3OHQ-U9pcEw8Z_SUt1rWqDg/edit#gid=1476714331 Google Sheets]<br />
* Directors<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Member documentation tool ==<br />
=== Access ===<br />
* [https://accounts.google.com/ServiceLogin?continue=https%3A%2F%2Fscript.google.com%2Fmacros%2Fs%2FAKfycbwCbmbKnX1H-vQes8S_6CCA1wg29mgnPzXSz2PYi6u_y6XA9JIh%2Fexec Direct link]<br />
* Administrators<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* Undo button<br />
* Option to load attendees from multiple events<br />
<br />
== Meeting tasks list ==<br />
=== Access ===<br />
* [http://makeict.org/wiki/Meeting_Tasks Public link on wiki]<br />
=== How to use ===<br />
* Just wait for it to load. It's slow; be patient.<br />
=== Known issues ===<br />
* Slow as molasses<br />
=== Feature requests ===<br />
* Speed it up<br />
<br />
== Board decisions list ==<br />
=== Access ===<br />
* [http://makeict.org/wiki/Board_Decisions Public link on wiki]<br />
=== How to use ===<br />
* Just wait for it to load. It's slow; be patient.<br />
=== Known issues ===<br />
* Slow as molasses<br />
=== Feature requests ===<br />
* Speed it up</div>Dominic Canarehttps://wiki.makeict.org/index.php?title=MediaWiki:Common.js&diff=4370MediaWiki:Common.js2016-11-21T06:54:39Z<p>Dominic Canare: </p>
<hr />
<div>/* Any JavaScript here will be loaded for all users on every page load. */<br />
<br />
<br />
/**<br />
* Copy @todos and @decisions into summaries at the bottom of meeting minutes<br />
**/<br />
(function () {<br />
var cloneNodesToList = function(list, nodes) {<br />
if(nodes.length == 0){<br />
var listItem = document.createElement("li");<br />
listItem.innerHTML = "None";<br />
list.appendChild(listItem);<br />
}else{<br />
for(var i=0; i<nodes.length; i++){<br />
var listItem = document.createElement("li");<br />
listItem.appendChild(nodes[i].cloneNode(true));<br />
list.appendChild(listItem);<br />
}<br />
}<br />
};<br />
<br />
var getTaskProperty = function(task, property){<br />
return $(task).find(".makeict-todo-" + property)[0].innerText.toLowerCase();<br />
}<br />
<br />
var taskCompare = function(taskA, taskB){<br />
var props = ["who", "when"];<br />
for(i in props){<br />
var a = getTaskProperty(taskA, props[i]);<br />
var b = getTaskProperty(taskB, props[i]);<br />
if(a > b) return 1;<br />
if(b > a) return -1;<br />
}<br />
return 0;<br />
};<br />
<br />
var list = $("#makeict-decision-summary")[0];<br />
if(list){<br />
cloneNodesToList(list, $(".makeict-decision"));<br />
}<br />
<br />
list = $("#makeict-todo-summary")[0];<br />
if(list){<br />
var tasks = $(".makeict-todo");<br />
try{<br />
tasks.sort(taskCompare);<br />
}catch(exc){}<br />
<br />
cloneNodesToList(list, tasks);<br />
}<br />
}());<br />
<br />
<br />
<br />
/**<br />
* Pull @todos and @decisions from all the meeting minutes into aggregate summaries<br />
**/<br />
(function () {<br />
var summaries = {<br />
'todos': {<br />
'outputNode': document.getElementById('makeict-all-todos'),<br />
'inputNode': 'makeict-todo-summary',<br />
},<br />
'decisions': {<br />
'outputNode': document.getElementById('makeict-all-decisions'),<br />
'inputNode': 'makeict-decision-summary',<br />
},<br />
};<br />
<br />
var meetingList = document.getElementById("meeting-list");<br />
if(!meetingList) return;<br />
<br />
var meetingListBullets = meetingList.getElementsByTagName("li");<br />
<br />
var processList = function(listIndex){<br />
if(listIndex >= meetingListBullets.length) return;<br />
var tmpFrame = document.createElement("iframe");<br />
tmpFrame.onload = function(){<br />
processList(listIndex+1); // start processing next one<br />
<br />
// wait for JS on sub pages to run<br />
var processSummaries = function(){<br />
for(var key in summaries){<br />
var outputNode = summaries[key].outputNode;<br />
if(!outputNode) continue;<br />
<br />
var summaryNode = this.contentDocument.getElementById(summaries[key].inputNode);<br />
var heading = document.createElement("h2");<br />
var link = document.createElement("a");<br />
link.href = this.src;<br />
link.innerHTML = this.contentDocument.getElementsByTagName("h1")[0].innerHTML;<br />
heading.appendChild(link);<br />
outputNode.appendChild(heading);<br />
if(summaryNode){<br />
outputNode.appendChild(summaryNode.cloneNode(true));<br />
}else{<br />
outputNode.innerHTML += "<div>Could not find " + key + " summary :(</div>";<br />
}<br />
<br />
document.body.removeChild(this);<br />
}<br />
};<br />
setTimeout(processSummaries.bind(this), 5000);<br />
};<br />
tmpFrame.style.display = "none";<br />
tmpFrame.src = meetingListBullets[listIndex].getElementsByTagName("a")[0].href;<br />
console.log('Processing ' + tmpFrame.src);<br />
document.body.appendChild(tmpFrame);<br />
};<br />
<br />
processList(0);<br />
}());</div>Dominic Canarehttps://wiki.makeict.org/index.php?title=MediaWiki:Common.js&diff=4369MediaWiki:Common.js2016-11-21T06:52:30Z<p>Dominic Canare: </p>
<hr />
<div>/* Any JavaScript here will be loaded for all users on every page load. */<br />
<br />
<br />
/**<br />
* Copy @todos and @decisions into summaries at the bottom of meeting minutes<br />
**/<br />
(function () {<br />
var cloneNodesToList = function(list, nodes) {<br />
if(nodes.length == 0){<br />
var listItem = document.createElement("li");<br />
listItem.innerHTML = "None";<br />
list.appendChild(listItem);<br />
}else{<br />
for(var i=0; i<nodes.length; i++){<br />
var listItem = document.createElement("li");<br />
listItem.appendChild(nodes[i].cloneNode(true));<br />
list.appendChild(listItem);<br />
}<br />
}<br />
};<br />
<br />
var getTaskProperty = function(task, property){<br />
return $(task).find(".makeict-todo-" + property)[0].innerText.toLowerCase();<br />
}<br />
<br />
var taskCompare = function(taskA, taskB){<br />
var props = ["who", "when"];<br />
for(i in props){<br />
var a = getTaskProperty(taskA, props[i]);<br />
var b = getTaskProperty(taskB, props[i]);<br />
if(a > b) return 1;<br />
if(b > a) return -1;<br />
}<br />
return 0;<br />
};<br />
<br />
var list = $("#makeict-decision-summary")[0];<br />
if(list){<br />
cloneNodesToList(list, $(".makeict-decision"));<br />
}<br />
<br />
list = $("#makeict-todo-summary")[0];<br />
if(list){<br />
var tasks = $(".makeict-todo");<br />
try{<br />
tasks.sort(taskCompare);<br />
}catch(exc){}<br />
<br />
cloneNodesToList(list, tasks);<br />
}<br />
}());<br />
<br />
<br />
<br />
/**<br />
* Pull @todos and @decisions from all the meeting minutes into aggregate summaries<br />
**/<br />
(function () {<br />
var summaries = {<br />
'todos': {<br />
'outputNode': document.getElementById('makeict-all-todos'),<br />
'inputNode': 'makeict-todo-summary',<br />
},<br />
'decisions': {<br />
'outputNode': document.getElementById('makeict-all-decisions'),<br />
'inputNode': 'makeict-decision-summary',<br />
},<br />
};<br />
<br />
var meetingListBullets = document.getElementById("meeting-list").getElementsByTagName("li");<br />
<br />
var processList = function(listIndex){<br />
if(listIndex >= meetingListBullets.length) return;<br />
var tmpFrame = document.createElement("iframe");<br />
tmpFrame.onload = function(){<br />
processList(listIndex+1); // start processing next one<br />
<br />
// wait for JS on sub pages to run<br />
var processSummaries = function(){<br />
for(var key in summaries){<br />
var outputNode = summaries[key].outputNode;<br />
if(!outputNode) continue;<br />
<br />
var summaryNode = this.contentDocument.getElementById(summaries[key].inputNode);<br />
var heading = document.createElement("h2");<br />
var link = document.createElement("a");<br />
link.href = this.src;<br />
//link.innerHTML = this.contentDocument.getElementsByTagName("h1")[0].innerHTML;<br />
link.innerHTML = 'blah';<br />
heading.appendChild(link);<br />
outputNode.appendChild(heading);<br />
if(summaryNode){<br />
outputNode.appendChild(summaryNode.cloneNode(true));<br />
}else{<br />
outputNode.innerHTML += "<div>Could not find " + key + " summary :(</div>";<br />
}<br />
<br />
document.body.removeChild(this);<br />
}<br />
};<br />
setTimeout(processSummaries.bind(this), 5000);<br />
};<br />
tmpFrame.style.display = "none";<br />
tmpFrame.src = meetingListBullets[listIndex].getElementsByTagName("a")[0].href;<br />
console.log('Processing ' + tmpFrame.src);<br />
document.body.appendChild(tmpFrame);<br />
};<br />
<br />
processList(0);<br />
}());</div>Dominic Canarehttps://wiki.makeict.org/index.php?title=MediaWiki:Common.js&diff=4368MediaWiki:Common.js2016-11-21T06:48:55Z<p>Dominic Canare: </p>
<hr />
<div>/* Any JavaScript here will be loaded for all users on every page load. */<br />
<br />
<br />
/**<br />
* Copy @todos and @decisions into summaries at the bottom of meeting minutes<br />
**/<br />
(function () {<br />
var cloneNodesToList = function(list, nodes) {<br />
if(nodes.length == 0){<br />
var listItem = document.createElement("li");<br />
listItem.innerHTML = "None";<br />
list.appendChild(listItem);<br />
}else{<br />
for(var i=0; i<nodes.length; i++){<br />
var listItem = document.createElement("li");<br />
listItem.appendChild(nodes[i].cloneNode(true));<br />
list.appendChild(listItem);<br />
}<br />
}<br />
};<br />
<br />
var getTaskProperty = function(task, property){<br />
return $(task).find(".makeict-todo-" + property)[0].innerText.toLowerCase();<br />
}<br />
<br />
var taskCompare = function(taskA, taskB){<br />
var props = ["who", "when"];<br />
for(i in props){<br />
var a = getTaskProperty(taskA, props[i]);<br />
var b = getTaskProperty(taskB, props[i]);<br />
if(a > b) return 1;<br />
if(b > a) return -1;<br />
}<br />
return 0;<br />
};<br />
<br />
var list = $("#makeict-decision-summary")[0];<br />
if(list){<br />
cloneNodesToList(list, $(".makeict-decision"));<br />
}<br />
<br />
list = $("#makeict-todo-summary")[0];<br />
if(list){<br />
var tasks = $(".makeict-todo");<br />
try{<br />
tasks.sort(taskCompare);<br />
}catch(exc){}<br />
<br />
cloneNodesToList(list, tasks);<br />
}<br />
}());<br />
<br />
<br />
<br />
/**<br />
* Pull @todos and @decisions from all the meeting minutes into aggregate summaries<br />
**/<br />
(function () {<br />
var summaries = {<br />
'todos': {<br />
'outputNode': document.getElementById('makeict-all-todos'),<br />
'inputNode': 'makeict-todo-summary',<br />
},<br />
'decisions': {<br />
'outputNode': document.getElementById('makeict-all-decisions'),<br />
'inputNode': 'makeict-decision-summary',<br />
},<br />
};<br />
<br />
var meetingListBullets = document.getElementById("meeting-list").getElementsByTagName("li");<br />
<br />
var processList = function(listIndex){<br />
if(listIndex >= meetingListBullets.length) return;<br />
var tmpFrame = document.createElement("iframe");<br />
tmpFrame.onload = function(){<br />
processList(listIndex+1); // start processing next one<br />
<br />
// wait for JS on sub pages to run<br />
var processSummaries = function(){<br />
for(var key in summaries){<br />
var outputNode = summaries[key].outputNode;<br />
if(!outputNode) continue;<br />
<br />
var summaryNode = this.contentDocument.getElementById(summaries[key].inputNode);<br />
var heading = document.createElement("h2");<br />
var link = document.createElement("a");<br />
link.href = this.src;<br />
link.innerHTML = this.contentDocument.getElementsByTagName("h1")[0].innerHTML;<br />
heading.appendChild(link);<br />
outputNode.appendChild(heading);<br />
if(summaryNode){<br />
outputNode.appendChild(summaryNode.cloneNode(true));<br />
}else{<br />
outputNode.innerHTML += "<div>Could not find " + key + " summary :(</div>";<br />
}<br />
<br />
document.body.removeChild(this);<br />
}<br />
};<br />
setTimeout(processSummaries.bind(this), 5000);<br />
};<br />
tmpFrame.style.display = "none";<br />
tmpFrame.src = meetingListBullets[listIndex].getElementsByTagName("a")[0].href;<br />
console.log('Processing ' + tmpFrame.src);<br />
document.body.appendChild(tmpFrame);<br />
};<br />
<br />
processList(0);<br />
}());</div>Dominic Canarehttps://wiki.makeict.org/index.php?title=MediaWiki:Common.js&diff=4367MediaWiki:Common.js2016-11-21T06:43:18Z<p>Dominic Canare: </p>
<hr />
<div>/* Any JavaScript here will be loaded for all users on every page load. */<br />
<br />
<br />
/**<br />
* Copy @todos and @decisions into summaries at the bottom of meeting minutes<br />
**/<br />
(function () {<br />
var cloneNodesToList = function(list, nodes) {<br />
if(nodes.length == 0){<br />
var listItem = document.createElement("li");<br />
listItem.innerHTML = "None";<br />
list.appendChild(listItem);<br />
}else{<br />
for(var i=0; i<nodes.length; i++){<br />
var listItem = document.createElement("li");<br />
listItem.appendChild(nodes[i].cloneNode(true));<br />
list.appendChild(listItem);<br />
}<br />
}<br />
};<br />
<br />
var getTaskProperty = function(task, property){<br />
return $(task).find(".makeict-todo-" + property)[0].innerText.toLowerCase();<br />
}<br />
<br />
var taskCompare = function(taskA, taskB){<br />
var props = ["who", "when"];<br />
for(i in props){<br />
var a = getTaskProperty(taskA, props[i]);<br />
var b = getTaskProperty(taskB, props[i]);<br />
if(a > b) return 1;<br />
if(b > a) return -1;<br />
}<br />
return 0;<br />
};<br />
<br />
var list = $("#makeict-decision-summary")[0];<br />
if(list){<br />
cloneNodesToList(list, $(".makeict-decision"));<br />
}<br />
<br />
list = $("#makeict-todo-summary")[0];<br />
if(list){<br />
var tasks = $(".makeict-todo");<br />
try{<br />
tasks.sort(taskCompare);<br />
}catch(exc){}<br />
<br />
cloneNodesToList(list, tasks);<br />
}<br />
}());<br />
<br />
<br />
<br />
/**<br />
* Pull @todos and @decisions from all the meeting minutes into aggregate summaries<br />
**/<br />
(function () {<br />
var summaries = {<br />
'todos': {<br />
'outputNode': document.getElementById('makeict-all-todos'),<br />
'inputNode': 'makeict-todo-summary',<br />
},<br />
'decisions': {<br />
'outputNode': document.getElementById('makeict-all-decisions'),<br />
'inputNode': 'makeict-decision-summary',<br />
},<br />
};<br />
<br />
var meetingListBullets = document.getElementById("meeting-list").getElementsByTagName("li");<br />
<br />
var processList = function(listIndex){<br />
if(listIndex >= meetingListBullets.length) return;<br />
var tmpFrame = document.createElement("iframe");<br />
tmpFrame.onload = function(){<br />
console.log('Processing ' + this.contentDocument.src);<br />
<br />
for(var key in summaries){<br />
var outputNode = summaries[key].outputNode;<br />
if(!outputNode) continue;<br />
<br />
var summaryNode = this.contentDocument.getElementById(summaries[key].inputNode);<br />
var heading = document.createElement("h2");<br />
var link = document.createElement("a");<br />
link.href = this.src;<br />
link.innerHTML = this.contentDocument.getElementsByTagName("h1")[0].innerHTML;<br />
heading.appendChild(link);<br />
outputNode.appendChild(heading);<br />
if(summaryNode){<br />
outputNode.appendChild(summaryNode.cloneNode(true));<br />
}else{<br />
outputNode.innerHTML += "<div>Could not find " + key + " summary :(</div>";<br />
}<br />
<br />
document.body.removeChild(this);<br />
}<br />
<br />
processList(listIndex+1);<br />
};<br />
tmpFrame.style.display = "none";<br />
tmpFrame.src = meetingListBullets[listIndex].getElementsByTagName("a")[0].href;<br />
document.body.appendChild(tmpFrame);<br />
};<br />
<br />
processList(0);<br />
}());</div>Dominic Canarehttps://wiki.makeict.org/index.php?title=MediaWiki:Common.js&diff=4366MediaWiki:Common.js2016-11-21T06:38:55Z<p>Dominic Canare: </p>
<hr />
<div>/* Any JavaScript here will be loaded for all users on every page load. */<br />
<br />
<br />
/**<br />
* Copy @todos and @decisions into summaries at the bottom of meeting minutes<br />
**/<br />
(function () {<br />
var cloneNodesToList = function(list, nodes) {<br />
if(nodes.length == 0){<br />
var listItem = document.createElement("li");<br />
listItem.innerHTML = "None";<br />
list.appendChild(listItem);<br />
}else{<br />
for(var i=0; i<nodes.length; i++){<br />
var listItem = document.createElement("li");<br />
listItem.appendChild(nodes[i].cloneNode(true));<br />
list.appendChild(listItem);<br />
}<br />
}<br />
};<br />
<br />
var getTaskProperty = function(task, property){<br />
return $(task).find(".makeict-todo-" + property)[0].innerText.toLowerCase();<br />
}<br />
<br />
var taskCompare = function(taskA, taskB){<br />
var props = ["who", "when"];<br />
for(i in props){<br />
var a = getTaskProperty(taskA, props[i]);<br />
var b = getTaskProperty(taskB, props[i]);<br />
if(a > b) return 1;<br />
if(b > a) return -1;<br />
}<br />
return 0;<br />
};<br />
<br />
var list = $("#makeict-decision-summary")[0];<br />
if(list){<br />
cloneNodesToList(list, $(".makeict-decision"));<br />
}<br />
<br />
list = $("#makeict-todo-summary")[0];<br />
if(list){<br />
var tasks = $(".makeict-todo");<br />
try{<br />
tasks.sort(taskCompare);<br />
}catch(exc){}<br />
<br />
cloneNodesToList(list, tasks);<br />
}<br />
}());<br />
<br />
<br />
<br />
/**<br />
* Pull @todos and @decisions from all the meeting minutes into aggregate summaries<br />
**/<br />
(function () {<br />
var summaries = {<br />
'todos': {<br />
'outputNode': document.getElementById('makeict-all-todos'),<br />
'inputNode': 'makeict-todo-summary',<br />
},<br />
'decisions': {<br />
'outputNode': document.getElementById('makeict-all-decisions'),<br />
'inputNode': 'makeict-decision-summary',<br />
},<br />
};<br />
<br />
var meetingListBullets = document.getElementById("meeting-list").getElementsByTagName("li");<br />
<br />
var processList = function(listIndex){<br />
if(listIndex >= meetingListBullets.length) return;<br />
var tmpFrame = document.createElement("iframe");<br />
tmpFrame.onload = function(){<br />
processList(listIndex+1);<br />
<br />
for(var key in summaries){<br />
var outputNode = summaries[key].outputNode;<br />
if(!outputNode) continue;<br />
<br />
var summaryNode = this.contentDocument.getElementById(summaries[key].inputNode);<br />
var heading = document.createElement("h2");<br />
var link = document.createElement("a");<br />
link.href = this.src;<br />
link.innerHTML = this.contentDocument.getElementsByTagName("h1")[0].innerHTML;<br />
heading.appendChild(link);<br />
outputNode.appendChild(heading);<br />
if(summaryNode){<br />
outputNode.appendChild(summaryNode.cloneNode(true));<br />
}else{<br />
outputNode.innerHTML += "<div>Could not find @todo summary :(</div>";<br />
}<br />
<br />
document.body.removeChild(this);<br />
}<br />
};<br />
tmpFrame.style.display = "none";<br />
tmpFrame.src = meetingListBullets[listIndex].getElementsByTagName("a")[0].href;<br />
document.body.appendChild(tmpFrame);<br />
};<br />
<br />
processList(0);<br />
}());</div>Dominic Canarehttps://wiki.makeict.org/index.php?title=MediaWiki:Common.js&diff=4365MediaWiki:Common.js2016-11-21T06:27:25Z<p>Dominic Canare: </p>
<hr />
<div>/* Any JavaScript here will be loaded for all users on every page load. */<br />
<br />
<br />
/**<br />
* Copy @todos and @decisions into summaries at the bottom of meeting minutes<br />
**/<br />
(function () {<br />
var cloneNodesToList = function(list, nodes) {<br />
if(nodes.length == 0){<br />
var listItem = document.createElement("li");<br />
listItem.innerHTML = "None";<br />
list.appendChild(listItem);<br />
}else{<br />
for(var i=0; i<nodes.length; i++){<br />
var listItem = document.createElement("li");<br />
listItem.appendChild(nodes[i].cloneNode(true));<br />
list.appendChild(listItem);<br />
}<br />
}<br />
};<br />
<br />
var getTaskProperty = function(task, property){<br />
return $(task).find(".makeict-todo-" + property)[0].innerText.toLowerCase();<br />
}<br />
<br />
var taskCompare = function(taskA, taskB){<br />
var props = ["who", "when"];<br />
for(i in props){<br />
var a = getTaskProperty(taskA, props[i]);<br />
var b = getTaskProperty(taskB, props[i]);<br />
if(a > b) return 1;<br />
if(b > a) return -1;<br />
}<br />
return 0;<br />
};<br />
<br />
var list = $("#makeict-decision-summary")[0];<br />
if(list){<br />
cloneNodesToList(list, $(".makeict-decision"));<br />
}<br />
<br />
list = $("#makeict-todo-summary")[0];<br />
if(list){<br />
var tasks = $(".makeict-todo");<br />
try{<br />
tasks.sort(taskCompare);<br />
}catch(exc){}<br />
<br />
cloneNodesToList(list, tasks);<br />
}<br />
}());<br />
<br />
<br />
<br />
/**<br />
* Pull @todos and @decisions from all the meeting minutes into aggregate summaries<br />
**/<br />
(function () {<br />
var outputNode = document.getElementById("makeict-all-todos");<br />
if(outputNode){<br />
var bullets = document.getElementById("meeting-list").getElementsByTagName("li");<br />
<br />
var processList = function(listIndex){<br />
if(listIndex >= bullets.length) return;<br />
<br />
<br />
// try{<br />
var tmpFrame = document.createElement("iframe");<br />
tmpFrame.onload = function(){<br />
processList(listIndex+1);<br />
<br />
var summaryNode = this.contentDocument.getElementById("makeict-todo-summary");<br />
var heading = document.createElement("h2");<br />
var link = document.createElement("a");<br />
link.href = this.src;<br />
link.innerHTML = this.contentDocument.getElementsByTagName("h1")[0].innerHTML;<br />
heading.appendChild(link);<br />
outputNode.appendChild(heading);<br />
if(summaryNode){<br />
outputNode.appendChild(summaryNode.cloneNode(true));<br />
}else{<br />
outputNode.innerHTML += "<div>Could not find @todo summary :(</div>";<br />
}<br />
<br />
document.body.removeChild(this);<br />
};<br />
tmpFrame.style.display = "none";<br />
tmpFrame.src = bullets[listIndex].getElementsByTagName("a")[0].href;<br />
document.body.appendChild(tmpFrame);<br />
// }catch(exc){<br />
// console.log(exc);<br />
// }<br />
};<br />
<br />
processList(0);<br />
}<br />
}());<br />
/*<br />
<br />
(function () {<br />
var outputNode = document.getElementById("makeict-all-decisions");<br />
if(outputNode){<br />
var bullets = document.getElementById("meeting-list").getElementsByTagName("li");<br />
<br />
var processList = function(listIndex){<br />
if(listIndex >= bullets.length) return;<br />
<br />
<br />
try{<br />
var tmpFrame = document.createElement("iframe");<br />
tmpFrame.onload = function(){<br />
processList(listIndex+1);<br />
<br />
var summaryNode = this.contentDocument.getElementById("makeict-decision-summary");<br />
var heading = document.createElement("h2");<br />
var link = document.createElement("a");<br />
link.href = this.src;<br />
link.innerHTML = this.contentDocument.getElementsByTagName("h1")[0].innerHTML;<br />
heading.appendChild(link);<br />
outputNode.appendChild(heading);<br />
if(summaryNode){<br />
outputNode.appendChild(summaryNode.cloneNode(true));<br />
}else{<br />
outputNode.innerHTML += "<div>Could not find @DECISION summary :(</div>";<br />
}<br />
<br />
document.body.removeChild(this);<br />
};<br />
tmpFrame.style.display = "none";<br />
tmpFrame.src = bullets[listIndex].getElementsByTagName("a")[0].href;<br />
document.body.appendChild(tmpFrame);<br />
}catch(exc){<br />
console.log(exc);<br />
}<br />
};<br />
<br />
processList(0);<br />
}<br />
}());<br />
*/</div>Dominic Canarehttps://wiki.makeict.org/index.php?title=MediaWiki:Common.js&diff=4364MediaWiki:Common.js2016-11-21T06:26:54Z<p>Dominic Canare: </p>
<hr />
<div>/* Any JavaScript here will be loaded for all users on every page load. */<br />
<br />
<br />
/**<br />
* Copy @todos and @decisions into summaries at the bottom of meeting minutes<br />
**/<br />
(function () {<br />
var cloneNodesToList = function(list, nodes) {<br />
if(nodes.length == 0){<br />
var listItem = document.createElement("li");<br />
listItem.innerHTML = "None";<br />
list.appendChild(listItem);<br />
}else{<br />
for(var i=0; i<nodes.length; i++){<br />
var listItem = document.createElement("li");<br />
listItem.appendChild(nodes[i].cloneNode(true));<br />
list.appendChild(listItem);<br />
}<br />
}<br />
};<br />
<br />
var getTaskProperty = function(task, property){<br />
return $(task).find(".makeict-todo-" + property)[0].innerText.toLowerCase();<br />
}<br />
<br />
var taskCompare = function(taskA, taskB){<br />
var props = ["who", "when"];<br />
for(i in props){<br />
var a = getTaskProperty(taskA, props[i]);<br />
var b = getTaskProperty(taskB, props[i]);<br />
if(a > b) return 1;<br />
if(b > a) return -1;<br />
}<br />
return 0;<br />
};<br />
<br />
var list = $("#makeict-decision-summary")[0];<br />
if(list){<br />
cloneNodesToList(list, $(".makeict-decision"));<br />
}<br />
<br />
list = $("#makeict-todo-summary")[0];<br />
if(list){<br />
var tasks = $(".makeict-todo");<br />
try{<br />
tasks.sort(taskCompare);<br />
}catch(exc){}<br />
cloneNodesToList(, tasks);<br />
}<br />
}());<br />
<br />
<br />
<br />
/**<br />
* Pull @todos and @decisions from all the meeting minutes into aggregate summaries<br />
**/<br />
(function () {<br />
var outputNode = document.getElementById("makeict-all-todos");<br />
if(outputNode){<br />
var bullets = document.getElementById("meeting-list").getElementsByTagName("li");<br />
<br />
var processList = function(listIndex){<br />
if(listIndex >= bullets.length) return;<br />
<br />
<br />
// try{<br />
var tmpFrame = document.createElement("iframe");<br />
tmpFrame.onload = function(){<br />
processList(listIndex+1);<br />
<br />
var summaryNode = this.contentDocument.getElementById("makeict-todo-summary");<br />
var heading = document.createElement("h2");<br />
var link = document.createElement("a");<br />
link.href = this.src;<br />
link.innerHTML = this.contentDocument.getElementsByTagName("h1")[0].innerHTML;<br />
heading.appendChild(link);<br />
outputNode.appendChild(heading);<br />
if(summaryNode){<br />
outputNode.appendChild(summaryNode.cloneNode(true));<br />
}else{<br />
outputNode.innerHTML += "<div>Could not find @todo summary :(</div>";<br />
}<br />
<br />
document.body.removeChild(this);<br />
};<br />
tmpFrame.style.display = "none";<br />
tmpFrame.src = bullets[listIndex].getElementsByTagName("a")[0].href;<br />
document.body.appendChild(tmpFrame);<br />
// }catch(exc){<br />
// console.log(exc);<br />
// }<br />
};<br />
<br />
processList(0);<br />
}<br />
}());<br />
/*<br />
<br />
(function () {<br />
var outputNode = document.getElementById("makeict-all-decisions");<br />
if(outputNode){<br />
var bullets = document.getElementById("meeting-list").getElementsByTagName("li");<br />
<br />
var processList = function(listIndex){<br />
if(listIndex >= bullets.length) return;<br />
<br />
<br />
try{<br />
var tmpFrame = document.createElement("iframe");<br />
tmpFrame.onload = function(){<br />
processList(listIndex+1);<br />
<br />
var summaryNode = this.contentDocument.getElementById("makeict-decision-summary");<br />
var heading = document.createElement("h2");<br />
var link = document.createElement("a");<br />
link.href = this.src;<br />
link.innerHTML = this.contentDocument.getElementsByTagName("h1")[0].innerHTML;<br />
heading.appendChild(link);<br />
outputNode.appendChild(heading);<br />
if(summaryNode){<br />
outputNode.appendChild(summaryNode.cloneNode(true));<br />
}else{<br />
outputNode.innerHTML += "<div>Could not find @DECISION summary :(</div>";<br />
}<br />
<br />
document.body.removeChild(this);<br />
};<br />
tmpFrame.style.display = "none";<br />
tmpFrame.src = bullets[listIndex].getElementsByTagName("a")[0].href;<br />
document.body.appendChild(tmpFrame);<br />
}catch(exc){<br />
console.log(exc);<br />
}<br />
};<br />
<br />
processList(0);<br />
}<br />
}());<br />
*/</div>Dominic Canarehttps://wiki.makeict.org/index.php?title=MediaWiki:Common.js&diff=4363MediaWiki:Common.js2016-11-21T06:22:02Z<p>Dominic Canare: </p>
<hr />
<div>/* Any JavaScript here will be loaded for all users on every page load. */<br />
<br />
(function () {<br />
var cloneNodesToList = function(list, nodes) {<br />
if(!list){<br />
console.log('List is null!');<br />
return false;<br />
}<br />
if(nodes.length == 0){<br />
var listItem = document.createElement("li");<br />
listItem.innerHTML = "None";<br />
list.appendChild(listItem);<br />
}else{<br />
for(var i=0; i<nodes.length; i++){<br />
var listItem = document.createElement("li");<br />
listItem.appendChild(nodes[i].cloneNode(true));<br />
list.appendChild(listItem);<br />
}<br />
}<br />
};<br />
<br />
var getTaskProperty = function(task, property){<br />
return $(task).find(".makeict-todo-" + property)[0].innerText.toLowerCase();<br />
}<br />
<br />
var taskCompare = function(taskA, taskB){<br />
var props = ["who", "when"];<br />
for(i in props){<br />
var a = getTaskProperty(taskA, props[i]);<br />
var b = getTaskProperty(taskB, props[i]);<br />
if(a > b) return 1;<br />
if(b > a) return -1;<br />
}<br />
return 0;<br />
};<br />
<br />
// try{<br />
cloneNodesToList($("#makeict-decision-summary")[0], $(".makeict-decision"));<br />
// }catch(exc){<br />
// console.log(exc);<br />
// }<br />
<br />
var tasks = $(".makeict-todo");<br />
try{<br />
tasks.sort(taskCompare);<br />
}catch(exc){}<br />
<br />
// try{<br />
cloneNodesToList($("#makeict-todo-summary")[0], tasks);<br />
// }catch(exc){<br />
// console.log(exc);<br />
// }<br />
}());<br />
<br />
<br />
<br />
(function () {<br />
var outputNode = document.getElementById("makeict-all-todos");<br />
if(outputNode){<br />
var bullets = document.getElementById("meeting-list").getElementsByTagName("li");<br />
<br />
var processList = function(listIndex){<br />
if(listIndex >= bullets.length) return;<br />
<br />
<br />
// try{<br />
var tmpFrame = document.createElement("iframe");<br />
tmpFrame.onload = function(){<br />
processList(listIndex+1);<br />
<br />
var summaryNode = this.contentDocument.getElementById("makeict-todo-summary");<br />
var heading = document.createElement("h2");<br />
var link = document.createElement("a");<br />
link.href = this.src;<br />
link.innerHTML = this.contentDocument.getElementsByTagName("h1")[0].innerHTML;<br />
heading.appendChild(link);<br />
outputNode.appendChild(heading);<br />
if(summaryNode){<br />
outputNode.appendChild(summaryNode.cloneNode(true));<br />
}else{<br />
outputNode.innerHTML += "<div>Could not find @todo summary :(</div>";<br />
}<br />
<br />
document.body.removeChild(this);<br />
};<br />
tmpFrame.style.display = "none";<br />
tmpFrame.src = bullets[listIndex].getElementsByTagName("a")[0].href;<br />
document.body.appendChild(tmpFrame);<br />
// }catch(exc){<br />
// console.log(exc);<br />
// }<br />
};<br />
<br />
processList(0);<br />
}<br />
}());<br />
/*<br />
<br />
(function () {<br />
var outputNode = document.getElementById("makeict-all-decisions");<br />
if(outputNode){<br />
var bullets = document.getElementById("meeting-list").getElementsByTagName("li");<br />
<br />
var processList = function(listIndex){<br />
if(listIndex >= bullets.length) return;<br />
<br />
<br />
try{<br />
var tmpFrame = document.createElement("iframe");<br />
tmpFrame.onload = function(){<br />
processList(listIndex+1);<br />
<br />
var summaryNode = this.contentDocument.getElementById("makeict-decision-summary");<br />
var heading = document.createElement("h2");<br />
var link = document.createElement("a");<br />
link.href = this.src;<br />
link.innerHTML = this.contentDocument.getElementsByTagName("h1")[0].innerHTML;<br />
heading.appendChild(link);<br />
outputNode.appendChild(heading);<br />
if(summaryNode){<br />
outputNode.appendChild(summaryNode.cloneNode(true));<br />
}else{<br />
outputNode.innerHTML += "<div>Could not find @DECISION summary :(</div>";<br />
}<br />
<br />
document.body.removeChild(this);<br />
};<br />
tmpFrame.style.display = "none";<br />
tmpFrame.src = bullets[listIndex].getElementsByTagName("a")[0].href;<br />
document.body.appendChild(tmpFrame);<br />
}catch(exc){<br />
console.log(exc);<br />
}<br />
};<br />
<br />
processList(0);<br />
}<br />
}());<br />
*/</div>Dominic Canarehttps://wiki.makeict.org/index.php?title=MediaWiki:Common.js&diff=4362MediaWiki:Common.js2016-11-21T06:19:51Z<p>Dominic Canare: </p>
<hr />
<div>/* Any JavaScript here will be loaded for all users on every page load. */<br />
<br />
(function () {<br />
var cloneNodesToList = function(list, nodes) {<br />
if(nodes.length == 0){<br />
var listItem = document.createElement("li");<br />
listItem.innerHTML = "None";<br />
list.appendChild(listItem);<br />
}else{<br />
for(var i=0; i<nodes.length; i++){<br />
var listItem = document.createElement("li");<br />
listItem.appendChild(nodes[i].cloneNode(true));<br />
list.appendChild(listItem);<br />
}<br />
}<br />
};<br />
<br />
var getTaskProperty = function(task, property){<br />
return $(task).find(".makeict-todo-" + property)[0].innerText.toLowerCase();<br />
}<br />
<br />
var taskCompare = function(taskA, taskB){<br />
var props = ["who", "when"];<br />
for(i in props){<br />
var a = getTaskProperty(taskA, props[i]);<br />
var b = getTaskProperty(taskB, props[i]);<br />
if(a > b) return 1;<br />
if(b > a) return -1;<br />
}<br />
return 0;<br />
};<br />
<br />
// try{<br />
cloneNodesToList($("#makeict-decision-summary")[0], $(".makeict-decision"));<br />
// }catch(exc){<br />
// console.log(exc);<br />
// }<br />
<br />
var tasks = $(".makeict-todo");<br />
try{<br />
tasks.sort(taskCompare);<br />
}catch(exc){}<br />
<br />
// try{<br />
cloneNodesToList($("#makeict-todo-summary")[0], tasks);<br />
// }catch(exc){<br />
// console.log(exc);<br />
// }<br />
}());<br />
<br />
<br />
<br />
(function () {<br />
var outputNode = document.getElementById("makeict-all-todos");<br />
if(outputNode){<br />
var bullets = document.getElementById("meeting-list").getElementsByTagName("li");<br />
<br />
var processList = function(listIndex){<br />
if(listIndex >= bullets.length) return;<br />
<br />
<br />
// try{<br />
var tmpFrame = document.createElement("iframe");<br />
tmpFrame.onload = function(){<br />
processList(listIndex+1);<br />
<br />
var summaryNode = this.contentDocument.getElementById("makeict-todo-summary");<br />
var heading = document.createElement("h2");<br />
var link = document.createElement("a");<br />
link.href = this.src;<br />
link.innerHTML = this.contentDocument.getElementsByTagName("h1")[0].innerHTML;<br />
heading.appendChild(link);<br />
outputNode.appendChild(heading);<br />
if(summaryNode){<br />
outputNode.appendChild(summaryNode.cloneNode(true));<br />
}else{<br />
outputNode.innerHTML += "<div>Could not find @todo summary :(</div>";<br />
}<br />
<br />
document.body.removeChild(this);<br />
};<br />
tmpFrame.style.display = "none";<br />
tmpFrame.src = bullets[listIndex].getElementsByTagName("a")[0].href;<br />
document.body.appendChild(tmpFrame);<br />
// }catch(exc){<br />
// console.log(exc);<br />
// }<br />
};<br />
<br />
processList(0);<br />
}<br />
}());<br />
/*<br />
<br />
(function () {<br />
var outputNode = document.getElementById("makeict-all-decisions");<br />
if(outputNode){<br />
var bullets = document.getElementById("meeting-list").getElementsByTagName("li");<br />
<br />
var processList = function(listIndex){<br />
if(listIndex >= bullets.length) return;<br />
<br />
<br />
try{<br />
var tmpFrame = document.createElement("iframe");<br />
tmpFrame.onload = function(){<br />
processList(listIndex+1);<br />
<br />
var summaryNode = this.contentDocument.getElementById("makeict-decision-summary");<br />
var heading = document.createElement("h2");<br />
var link = document.createElement("a");<br />
link.href = this.src;<br />
link.innerHTML = this.contentDocument.getElementsByTagName("h1")[0].innerHTML;<br />
heading.appendChild(link);<br />
outputNode.appendChild(heading);<br />
if(summaryNode){<br />
outputNode.appendChild(summaryNode.cloneNode(true));<br />
}else{<br />
outputNode.innerHTML += "<div>Could not find @DECISION summary :(</div>";<br />
}<br />
<br />
document.body.removeChild(this);<br />
};<br />
tmpFrame.style.display = "none";<br />
tmpFrame.src = bullets[listIndex].getElementsByTagName("a")[0].href;<br />
document.body.appendChild(tmpFrame);<br />
}catch(exc){<br />
console.log(exc);<br />
}<br />
};<br />
<br />
processList(0);<br />
}<br />
}());<br />
*/</div>Dominic Canarehttps://wiki.makeict.org/index.php?title=MediaWiki:Common.js&diff=4361MediaWiki:Common.js2016-11-21T06:18:22Z<p>Dominic Canare: </p>
<hr />
<div>/* Any JavaScript here will be loaded for all users on every page load. */<br />
<br />
(function () {<br />
var cloneNodesToList = function(list, nodes) {<br />
if(nodes.length == 0){<br />
var listItem = document.createElement("li");<br />
listItem.innerHTML = "None";<br />
list.appendChild(listItem);<br />
}else{<br />
for(var i=0; i<nodes.length; i++){<br />
var listItem = document.createElement("li");<br />
listItem.appendChild(nodes[i].cloneNode(true));<br />
list.appendChild(listItem);<br />
}<br />
}<br />
};<br />
<br />
var getTaskProperty = function(task, property){<br />
return $(task).find(".makeict-todo-" + property)[0].innerText.toLowerCase();<br />
}<br />
<br />
var taskCompare = function(taskA, taskB){<br />
var props = ["who", "when"];<br />
for(i in props){<br />
var a = getTaskProperty(taskA, props[i]);<br />
var b = getTaskProperty(taskB, props[i]);<br />
if(a > b) return 1;<br />
if(b > a) return -1;<br />
}<br />
return 0;<br />
};<br />
<br />
try{<br />
cloneNodesToList($("#makeict-decision-summary")[0], $(".makeict-decision"));<br />
}catch(exc){<br />
console.log(exc);<br />
}<br />
<br />
var tasks = $(".makeict-todo");<br />
try{<br />
tasks.sort(taskCompare);<br />
}catch(exc){}<br />
<br />
try{<br />
cloneNodesToList($("#makeict-todo-summary")[0], tasks);<br />
}catch(exc){<br />
console.log(exc);<br />
}<br />
}());<br />
<br />
<br />
<br />
(function () {<br />
var outputNode = document.getElementById("makeict-all-todos");<br />
if(outputNode){<br />
var bullets = document.getElementById("meeting-list").getElementsByTagName("li");<br />
<br />
var processList = function(listIndex){<br />
if(listIndex >= bullets.length) return;<br />
<br />
<br />
// try{<br />
var tmpFrame = document.createElement("iframe");<br />
tmpFrame.onload = function(){<br />
processList(listIndex+1);<br />
<br />
var summaryNode = this.contentDocument.getElementById("makeict-todo-summary");<br />
var heading = document.createElement("h2");<br />
var link = document.createElement("a");<br />
link.href = this.src;<br />
link.innerHTML = this.contentDocument.getElementsByTagName("h1")[0].innerHTML;<br />
heading.appendChild(link);<br />
outputNode.appendChild(heading);<br />
if(summaryNode){<br />
outputNode.appendChild(summaryNode.cloneNode(true));<br />
}else{<br />
outputNode.innerHTML += "<div>Could not find @todo summary :(</div>";<br />
}<br />
<br />
document.body.removeChild(this);<br />
};<br />
tmpFrame.style.display = "none";<br />
tmpFrame.src = bullets[listIndex].getElementsByTagName("a")[0].href;<br />
document.body.appendChild(tmpFrame);<br />
// }catch(exc){<br />
// console.log(exc);<br />
// }<br />
};<br />
<br />
processList(0);<br />
}<br />
}());<br />
/*<br />
<br />
(function () {<br />
var outputNode = document.getElementById("makeict-all-decisions");<br />
if(outputNode){<br />
var bullets = document.getElementById("meeting-list").getElementsByTagName("li");<br />
<br />
var processList = function(listIndex){<br />
if(listIndex >= bullets.length) return;<br />
<br />
<br />
try{<br />
var tmpFrame = document.createElement("iframe");<br />
tmpFrame.onload = function(){<br />
processList(listIndex+1);<br />
<br />
var summaryNode = this.contentDocument.getElementById("makeict-decision-summary");<br />
var heading = document.createElement("h2");<br />
var link = document.createElement("a");<br />
link.href = this.src;<br />
link.innerHTML = this.contentDocument.getElementsByTagName("h1")[0].innerHTML;<br />
heading.appendChild(link);<br />
outputNode.appendChild(heading);<br />
if(summaryNode){<br />
outputNode.appendChild(summaryNode.cloneNode(true));<br />
}else{<br />
outputNode.innerHTML += "<div>Could not find @DECISION summary :(</div>";<br />
}<br />
<br />
document.body.removeChild(this);<br />
};<br />
tmpFrame.style.display = "none";<br />
tmpFrame.src = bullets[listIndex].getElementsByTagName("a")[0].href;<br />
document.body.appendChild(tmpFrame);<br />
}catch(exc){<br />
console.log(exc);<br />
}<br />
};<br />
<br />
processList(0);<br />
}<br />
}());<br />
*/</div>Dominic Canarehttps://wiki.makeict.org/index.php?title=Admin_Tools&diff=4236Admin Tools2016-10-03T23:57:55Z<p>Dominic Canare: </p>
<hr />
<div><div class="toclimit tocshow-1">__TOC__</div><br />
<br />
== Security system ==<br />
=== Access ===<br />
* https://security.makeict.org<br />
* Chief Security Officer and delegates<br />
=== Known issues ===<br />
* https://github.com/makeict/electronic-door/issues?q=is%3Aopen+is%3Aissue+label%3Abug<br />
=== Feature requests ===<br />
* https://github.com/makeict/electronic-door/issues?q=is%3Aopen+is%3Aissue+label%3Aenhancement<br />
<br />
== Orientation Sign in ==<br />
=== Access ===<br />
* [https://accounts.google.com/ServiceLogin?continue=https://script.google.com/macros/s/AKfycbycUxtlhjfHITR_Kp0N-SkzOdpGGVlQEjLNswJ0xkgdmYTswRQ/exec Direct link]<br />
* Administrators, Onboarding team<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Event checkin tool ==<br />
=== Access ===<br />
* [https://accounts.google.com/ServiceLogin?continue=https%3A%2F%2Fscript.google.com%2Fa%2Fmacros%2Fmakeict.org%2Fs%2FAKfycbzTzHbSwgypihr0zcuwAGafle-AhJn2R0vNflNJWVMPfHrFJf8%2Fexec Direct link]<br />
* Administrators, Events team<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Event creation tool ==<br />
=== Access ===<br />
* [https://accounts.google.com/ServiceLogin?continue=https://drive.google.com/drive/folders/0B6OtvVg0pDT7ZVg1WTV3cmN5NlE Windows and Linux downloads]<br />
* Administrators, Makerspace Program Director<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
Once you have the application installed on your computer open it. You will have to log in using your MakeICT.org account. Under the heading there are three choices: Start with a Preset , Copy Existing , and Start from Scratch. The Start with Preset allows you to choose from three profiles: Certification, Workshop, and Class. The Copy Existing allows you to duplicate one of the last several events that were posted. The Start from Scratch gives you a clean default form.<br />
If the person requesting to host an event has filled out the Workshop Proposal Form you should have all the information you need to post the event with exception of a picture to use for the facebook event page. Now your ready to enter the basic information. The name of the event should be brief but informative and should include the name of the presenter. If the event is generic, like a safety class, the name of the presenter is not necessary. If the location is at MakeICT put 1500 E. Douglas in the location field. The description of the event can be taken from the Workshop Proposal (Response) form. It should give details about what the attendee should expect to experience at the event. It should also indicate whether they should bring special materials and if they need to be authorized in a certain area. Simply adding Required authorizations: Woodshop at the bottom of the description will set a flag in the registration to tell the person they need to attend the safety class first.<br />
As they say timing is everything. Enter the date and time of the event. The RSVP settings dictate the cost for members and non-members.<br />
Then in the Cross Posting area you can un-check any of the media check boxes if you do not want that type of post. Otherwise hit Create! and watch the magic happen. Windows will open, you will need to sign in to Wild Apricot, facebook, and Meetup but all the information will be fill out for you. When it's done the windows are left open for you to double check and publish. In the Meetup window scroll to the bottom and click Announce. In the calendar window click on Rooms. ect and choose any rooms or resources that are needed for the event. Then save and close. In the facebook page click Publish. <br />
Close all windows. <br />
Your done. Wasn't that easy :( Well it's better than the old way. Thanks to Dominic Canare for this really helpful tool.<br />
<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Group Copy tool ==<br />
=== Access ===<br />
* [https://accounts.google.com/ServiceLogin?continue=https%3A%2F%2Fscript.google.com%2Fa%2Fmacros%2Fmakeict.org%2Fs%2FAKfycbzQv_mmWN9OzlRs-wigph8Py00R7lX-mzblW4U0SYAxdmQUh2U%2Fexec Direct link]<br />
* Administrators<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Makerspace authorizations tool ==<br />
=== Access ===<br />
* [https://accounts.google.com/ServiceLogin?continue=https%3A%2F%2Fscript.google.com%2Fa%2Fmacros%2Fmakeict.org%2Fs%2FAKfycbwzGVwldpscdPbgdpJ6nyYDPbxYB-Idl7rDoeH_QFN2cnvwmW0%2Fexec Direct Link]<br />
* Administrators, Laser-heads<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Member audit tools ==<br />
=== Access ===<br />
* [https://docs.google.com/spreadsheets/d/1RVOfHRwrt5PKmzcT5Ino3OHQ-U9pcEw8Z_SUt1rWqDg/edit#gid=1476714331 Google Sheets]<br />
* Directors<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Member documentation tool ==<br />
=== Access ===<br />
* [https://accounts.google.com/ServiceLogin?continue=https%3A%2F%2Fscript.google.com%2Fmacros%2Fs%2FAKfycbwCbmbKnX1H-vQes8S_6CCA1wg29mgnPzXSz2PYi6u_y6XA9JIh%2Fexec Direct link]<br />
* Administrators<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* Undo button<br />
* Option to load attendees from multiple events</div>Dominic Canarehttps://wiki.makeict.org/index.php?title=Admin_Tools&diff=4210Admin Tools2016-09-09T23:46:58Z<p>Dominic Canare: /* Security system */</p>
<hr />
<div><div class="toclimit tocshow-1">__TOC__</div><br />
<br />
== Security system ==<br />
=== Access ===<br />
* https://security.makeict.org<br />
* Chief Security Officer and delegates<br />
=== Known issues ===<br />
* https://github.com/makeict/electronic-door/issues?q=is%3Aopen+is%3Aissue+label%3Abug<br />
=== Feature requests ===<br />
* https://github.com/makeict/electronic-door/issues?q=is%3Aopen+is%3Aissue+label%3Aenhancement<br />
<br />
== Event checkin tool ==<br />
=== Access ===<br />
* [https://accounts.google.com/ServiceLogin?continue=https%3A%2F%2Fscript.google.com%2Fa%2Fmacros%2Fmakeict.org%2Fs%2FAKfycbzTzHbSwgypihr0zcuwAGafle-AhJn2R0vNflNJWVMPfHrFJf8%2Fexec Direct link]<br />
* Administrators, Events team<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Event creation tool ==<br />
=== Access ===<br />
* [https://accounts.google.com/ServiceLogin?continue=https://drive.google.com/drive/folders/0B6OtvVg0pDT7ZVg1WTV3cmN5NlE Windows and Linux downloads]<br />
* Administrators, Makerspace Program Director<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Group Copy tool ==<br />
=== Access ===<br />
* [https://accounts.google.com/ServiceLogin?continue=https%3A%2F%2Fscript.google.com%2Fa%2Fmacros%2Fmakeict.org%2Fs%2FAKfycbzQv_mmWN9OzlRs-wigph8Py00R7lX-mzblW4U0SYAxdmQUh2U%2Fexec Direct link]<br />
* Administrators<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Makerspace authorizations tool ==<br />
=== Access ===<br />
* [https://accounts.google.com/ServiceLogin?continue=https%3A%2F%2Fscript.google.com%2Fa%2Fmacros%2Fmakeict.org%2Fs%2FAKfycbwzGVwldpscdPbgdpJ6nyYDPbxYB-Idl7rDoeH_QFN2cnvwmW0%2Fexec Direct Link]<br />
* Administrators, Laser-heads<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Member audit tools ==<br />
=== Access ===<br />
* [https://docs.google.com/spreadsheets/d/1RVOfHRwrt5PKmzcT5Ino3OHQ-U9pcEw8Z_SUt1rWqDg/edit#gid=1476714331 Google Sheets]<br />
* Directors<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Member documentation tool ==<br />
=== Access ===<br />
* [https://accounts.google.com/ServiceLogin?continue=https%3A%2F%2Fscript.google.com%2Fmacros%2Fs%2FAKfycbwCbmbKnX1H-vQes8S_6CCA1wg29mgnPzXSz2PYi6u_y6XA9JIh%2Fexec Direct link]<br />
* Administrators<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''</div>Dominic Canarehttps://wiki.makeict.org/index.php?title=Admin_Tools&diff=4209Admin Tools2016-09-09T23:46:32Z<p>Dominic Canare: </p>
<hr />
<div><div class="toclimit tocshow-1">__TOC__</div><br />
<br />
== Security system ==<br />
=== Access ===<br />
* https://security.makeict.org<br />
* Accessible to the Chief Security Officer and delegates<br />
=== Known issues ===<br />
* https://github.com/makeict/electronic-door/issues?q=is%3Aopen+is%3Aissue+label%3Abug<br />
=== Feature requests ===<br />
* https://github.com/makeict/electronic-door/issues?q=is%3Aopen+is%3Aissue+label%3Aenhancement<br />
<br />
== Event checkin tool ==<br />
=== Access ===<br />
* [https://accounts.google.com/ServiceLogin?continue=https%3A%2F%2Fscript.google.com%2Fa%2Fmacros%2Fmakeict.org%2Fs%2FAKfycbzTzHbSwgypihr0zcuwAGafle-AhJn2R0vNflNJWVMPfHrFJf8%2Fexec Direct link]<br />
* Administrators, Events team<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Event creation tool ==<br />
=== Access ===<br />
* [https://accounts.google.com/ServiceLogin?continue=https://drive.google.com/drive/folders/0B6OtvVg0pDT7ZVg1WTV3cmN5NlE Windows and Linux downloads]<br />
* Administrators, Makerspace Program Director<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Group Copy tool ==<br />
=== Access ===<br />
* [https://accounts.google.com/ServiceLogin?continue=https%3A%2F%2Fscript.google.com%2Fa%2Fmacros%2Fmakeict.org%2Fs%2FAKfycbzQv_mmWN9OzlRs-wigph8Py00R7lX-mzblW4U0SYAxdmQUh2U%2Fexec Direct link]<br />
* Administrators<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Makerspace authorizations tool ==<br />
=== Access ===<br />
* [https://accounts.google.com/ServiceLogin?continue=https%3A%2F%2Fscript.google.com%2Fa%2Fmacros%2Fmakeict.org%2Fs%2FAKfycbwzGVwldpscdPbgdpJ6nyYDPbxYB-Idl7rDoeH_QFN2cnvwmW0%2Fexec Direct Link]<br />
* Administrators, Laser-heads<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Member audit tools ==<br />
=== Access ===<br />
* [https://docs.google.com/spreadsheets/d/1RVOfHRwrt5PKmzcT5Ino3OHQ-U9pcEw8Z_SUt1rWqDg/edit#gid=1476714331 Google Sheets]<br />
* Directors<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Member documentation tool ==<br />
=== Access ===<br />
* [https://accounts.google.com/ServiceLogin?continue=https%3A%2F%2Fscript.google.com%2Fmacros%2Fs%2FAKfycbwCbmbKnX1H-vQes8S_6CCA1wg29mgnPzXSz2PYi6u_y6XA9JIh%2Fexec Direct link]<br />
* Administrators<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''</div>Dominic Canarehttps://wiki.makeict.org/index.php?title=MediaWiki:Common.css&diff=4208MediaWiki:Common.css2016-09-09T23:46:09Z<p>Dominic Canare: Created page with "/* CSS placed here will be applied to all skins */ .toclimit li { display: none; } .tocshow-1 li.toclevel-1 { display: block; } .tocshow-2 li.toclevel-1, .tocshow-2..."</p>
<hr />
<div>/* CSS placed here will be applied to all skins */<br />
.toclimit li {<br />
display: none;<br />
}<br />
<br />
.tocshow-1 li.toclevel-1 {<br />
display: block;<br />
}<br />
<br />
.tocshow-2 li.toclevel-1,<br />
.tocshow-2 li.toclevel-2 {<br />
display: block;<br />
}<br />
<br />
.tocshow-3 li.toclevel-1,<br />
.tocshow-3 li.toclevel-2,<br />
.tocshow-3 li.toclevel-3 {<br />
display: block;<br />
}<br />
<br />
.tocshow-4 li.toclevel-1,<br />
.tocshow-4 li.toclevel-2,<br />
.tocshow-4 li.toclevel-3,<br />
.tocshow-4 li.toclevel-4 {<br />
display: block;<br />
}</div>Dominic Canarehttps://wiki.makeict.org/index.php?title=Admin_Tools&diff=4206Admin Tools2016-09-09T23:24:44Z<p>Dominic Canare: Dominic Canare moved page Custom Tools to Admin Tools</p>
<hr />
<div>== Event checkin tool ==<br />
=== Access ===<br />
* ''Instructions on how to access it, including a URL''<br />
* ''Groups of people who are able to use it''<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Event creation tool ==<br />
=== Access ===<br />
* ''Instructions on how to access it, including a URL''<br />
* ''Groups of people who are able to use it''<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Group Copy tool ==<br />
=== Access ===<br />
* ''Instructions on how to access it, including a URL''<br />
* ''Groups of people who are able to use it''<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Makerspace authorizations tool ==<br />
=== Access ===<br />
* ''Instructions on how to access it, including a URL''<br />
* ''Groups of people who are able to use it''<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Member audit tools ==<br />
=== Access ===<br />
* ''Instructions on how to access it, including a URL''<br />
* ''Groups of people who are able to use it''<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Member documentation tool ==<br />
=== Access ===<br />
* ''Instructions on how to access it, including a URL''<br />
* ''Groups of people who are able to use it''<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''</div>Dominic Canarehttps://wiki.makeict.org/index.php?title=Custom_Tools&diff=4207Custom Tools2016-09-09T23:24:44Z<p>Dominic Canare: Dominic Canare moved page Custom Tools to Admin Tools</p>
<hr />
<div>#REDIRECT [[Admin Tools]]</div>Dominic Canarehttps://wiki.makeict.org/index.php?title=Admin_Tools&diff=4204Admin Tools2016-09-06T16:54:20Z<p>Dominic Canare: </p>
<hr />
<div>== Event checkin tool ==<br />
=== Access ===<br />
* ''Instructions on how to access it, including a URL''<br />
* ''Groups of people who are able to use it''<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Event creation tool ==<br />
=== Access ===<br />
* ''Instructions on how to access it, including a URL''<br />
* ''Groups of people who are able to use it''<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Group Copy tool ==<br />
=== Access ===<br />
* ''Instructions on how to access it, including a URL''<br />
* ''Groups of people who are able to use it''<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Makerspace authorizations tool ==<br />
=== Access ===<br />
* ''Instructions on how to access it, including a URL''<br />
* ''Groups of people who are able to use it''<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Member audit tools ==<br />
=== Access ===<br />
* ''Instructions on how to access it, including a URL''<br />
* ''Groups of people who are able to use it''<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Member documentation tool ==<br />
=== Access ===<br />
* ''Instructions on how to access it, including a URL''<br />
* ''Groups of people who are able to use it''<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''</div>Dominic Canarehttps://wiki.makeict.org/index.php?title=Admin_Tools&diff=4171Admin Tools2016-08-23T00:02:55Z<p>Dominic Canare: </p>
<hr />
<div>== Group Copy tool ==<br />
=== Access ===<br />
* ''Instructions on how to access it, including a URL''<br />
* ''Groups of people who are able to use it''<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Member documentation tool ==<br />
=== Access ===<br />
* ''Instructions on how to access it, including a URL''<br />
* ''Groups of people who are able to use it''<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Makerspace authorizations tool ==<br />
=== Access ===<br />
* ''Instructions on how to access it, including a URL''<br />
* ''Groups of people who are able to use it''<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''<br />
<br />
== Member audit tools ==<br />
=== Access ===<br />
* ''Instructions on how to access it, including a URL''<br />
* ''Groups of people who are able to use it''<br />
=== How to use ===<br />
* ''Directions on how to use it''<br />
=== Known issues ===<br />
* ''List of known issues''<br />
=== Feature requests ===<br />
* ''List of requested features''</div>Dominic Canarehttps://wiki.makeict.org/index.php?title=Board_of_Directors&diff=4134Board of Directors2016-08-14T23:47:33Z<p>Dominic Canare: </p>
<hr />
<div>== Board of Directors ==<br />
{| class="wikitable"<br />
!Title<br />
!Email<br />
!Forwards to<br />
|-<br />
|President<br />
|president@makeict.org<br />
|[[User:Logan Pajunen|Logan Pajunen]]<br />
|-<br />
|Vice President<br />
|vicepresident@makeict.org<br />
|[[User:John Alexander|John Alexander]]<br />
|-<br />
|Secretary<br />
|secretary@makeict.org<br />
|[[User:Kip Landwehr|Kip Landwehr]]<br />
|-<br />
|Treasurer<br />
|treasurer@makeict.org<br />
|[[User:Tracy Hoover|Tracy Hoover]]<br />
|-<br />
|Director At Large<br />
|barb@makeict.org<br />
|[[User:Barbara Davis|Barbara Davis]]<br />
|-<br />
|Director At Large<br />
|christian@makeict.org<br />
|[[User:Christian Kindel|Christian Kindel]]<br />
|-<br />
|Director At Large<br />
|curt@makeict.org<br />
|[[User:Curt Gridley|Curt Gridley]]<br />
|-<br />
|Director At Large<br />
|jameslancaster@makeict.org<br />
|[[User:James Lancaster|James Lancaster]]<br />
|-<br />
|Past President<br />
|dom@makeict.org<br />
|[[User:Dominic Canare|Dominic Canare]]<br />
|}<br />
<br />
Visit the [[Contact Information]] page for information about other leadership positions.</div>Dominic Canarehttps://wiki.makeict.org/index.php?title=User:Dominic_Canare/common.js&diff=4124User:Dominic Canare/common.js2016-08-12T20:48:19Z<p>Dominic Canare: </p>
<hr />
<div>/* Any JavaScript here will be loaded for all users on every page load. */<br />
<br />
(function () {<br />
console.log('test');<br />
}());</div>Dominic Canarehttps://wiki.makeict.org/index.php?title=User:Dominic_Canare/common.js&diff=4123User:Dominic Canare/common.js2016-08-12T20:47:09Z<p>Dominic Canare: Created page with "console.log('test');"</p>
<hr />
<div>console.log('test');</div>Dominic Canarehttps://wiki.makeict.org/index.php?title=August_8_2016&diff=4107August 8 20162016-08-09T00:14:56Z<p>Dominic Canare: /* General Topics and TODOs */</p>
<hr />
<div>== Roll Call ==<br />
* Board Members<br />
** Barb Davis<br />
** Christian Kindle<br />
** Curt Gridley<br />
** Dominic Canare<br />
** James Lancaster<br />
** John Alexander<br />
** Kip Landwehr<br />
** Logan Pajunen<br />
** Tracy Hoover<br />
<br />
* Members<br />
** Jeremiah Burian<br />
** Jeremiah Loder<br />
** Jerry Carpenter<br />
** Jess B<br />
** Mike Barushok<br />
** Mike Hutton<br />
** Tom McGuire<br />
<br />
== Officer Reports ==<br />
<br />
* Secretary - Acceptance of previous meeting minutes<br />
* [https://drive.google.com/open?id=0B8huXEwDkDV2ZzlHSlFyaU1MMnIwQ1d3cXVSeGUzSVFGb0d3 Treasurer’s Monthly Report]<br />
<br />
== Old Business ==<br />
<br />
* Trash service update and bin location discussion - Logan<br />
** Now have trash service at the makerspace.<br />
** Bins are currently in the alley<br />
<br />
* AC update - Logan<br />
** Sam and Logan are getting quotes for AC and Heating in the classroom<br />
<br />
* Kiln update - Curt<br />
** Kiln is fixed.<br />
** Looking at building a controller for heat control<br />
<br />
* Computer servers and software update - James Lancaster and John Alexander<br />
** Having issues with getting things installed on all the classroom laptops<br />
*** Can fix the major hassle by installing software and updates from a centralized server<br />
*** Would need to upgrade Windows computers from home to pro<br />
**** Cost of this would be $15 per computer for us, so ~$215<br />
** Need new server hardware to build a file server and handle software installations as mentioned above.<br />
*** Can purchase a server for somewhere in the neighborhood of $350<br />
** Motion to approve up to $600 on server hardware and upgrading computers from home to pro<br />
** Motion passes<br />
<br />
* Insurance<br />
* Bylaws review<br />
* Business cards<br />
<br />
* Building exterior<br />
** Christian is planning to send an email soon on this.<br />
<br />
* Donor recognition - John Alexander<br />
** {{todo|who=Tom|what=Form committee for donor recognition (with John A., Barb D., Dominic C.}}<br />
<br />
== New Business ==<br />
<br />
* Change financial year - Treasurer<br />
** Currently, our fiscal year is December 1 through November 30<br />
** Decision: Change our fiscal year to match the calendar year.<br />
<br />
* Budgeting discussion - Treasurer<br />
** This is a long term project.<br />
** Hoping to have a budgeting plan in place by the beginning of 2017<br />
** When in place, BDs will have to provide a planned budget for the year<br />
<br />
* Review and approve following:<br />
** Definitions Document<br />
*** {{todo|who=Board of Directors|what=Review the Definitions Document}}<br />
** Nametag Policy v0.2<br />
*** Strike the security<br />
*** {{todo|who=Kip|what=Start a new thread about the nametag policy|done=0}}<br />
** New Area Commissioning Policy<br />
** Workload Policies<br />
** Suggestion to split all of the these policies into seperate threads and work them all out on line.<br />
<br />
* Maker Academy Director appointment and draft strategic plan<br />
** Motion to appoint Laura Scholl as the Maker Academy program director<br />
** Motion passes<br />
<br />
* Discuss “tragedy of the commons” problems re: woodshop<br />
<br />
== Announcements ==<br />
<br />
* Exploration Place wants to formalize our relationship for next year.<br />
* The President will soon set a quarterly formal board meeting to discuss our future direction and address policy.<br />
* The President will soon release a calendar when the agenda will be open and closed for submissions and requested items and documentation for agenda submissions.<br />
<br />
== General Topics and TODOs ==<br />
{{todo|who=Logan|what=Schedule executive meeting to discuss BD/access policy issues}}<br />
<br />
== Decision Summary ==<br />
{{decision-summary}}<br />
<br />
== Task Summary ==<br />
{{todo-summary}}</div>Dominic Canarehttps://wiki.makeict.org/index.php?title=August_8_2016&diff=4106August 8 20162016-08-09T00:14:11Z<p>Dominic Canare: /* Old Business */</p>
<hr />
<div>== Roll Call ==<br />
* Board Members<br />
** Barb Davis<br />
** Christian Kindle<br />
** Curt Gridley<br />
** Dominic Canare<br />
** James Lancaster<br />
** John Alexander<br />
** Kip Landwehr<br />
** Logan Pajunen<br />
** Tracy Hoover<br />
<br />
* Members<br />
** Jeremiah Burian<br />
** Jeremiah Loder<br />
** Jerry Carpenter<br />
** Jess B<br />
** Mike Barushok<br />
** Mike Hutton<br />
** Tom McGuire<br />
<br />
== Officer Reports ==<br />
<br />
* Secretary - Acceptance of previous meeting minutes<br />
* [https://drive.google.com/open?id=0B8huXEwDkDV2ZzlHSlFyaU1MMnIwQ1d3cXVSeGUzSVFGb0d3 Treasurer’s Monthly Report]<br />
<br />
== Old Business ==<br />
<br />
* Trash service update and bin location discussion - Logan<br />
** Now have trash service at the makerspace.<br />
** Bins are currently in the alley<br />
<br />
* AC update - Logan<br />
** Sam and Logan are getting quotes for AC and Heating in the classroom<br />
<br />
* Kiln update - Curt<br />
** Kiln is fixed.<br />
** Looking at building a controller for heat control<br />
<br />
* Computer servers and software update - James Lancaster and John Alexander<br />
** Having issues with getting things installed on all the classroom laptops<br />
*** Can fix the major hassle by installing software and updates from a centralized server<br />
*** Would need to upgrade Windows computers from home to pro<br />
**** Cost of this would be $15 per computer for us, so ~$215<br />
** Need new server hardware to build a file server and handle software installations as mentioned above.<br />
*** Can purchase a server for somewhere in the neighborhood of $350<br />
** Motion to approve up to $600 on server hardware and upgrading computers from home to pro<br />
** Motion passes<br />
<br />
* Insurance<br />
* Bylaws review<br />
* Business cards<br />
<br />
* Building exterior<br />
** Christian is planning to send an email soon on this.<br />
<br />
* Donor recognition - John Alexander<br />
** {{todo|who=Tom|what=Form committee for donor recognition (with John A., Barb D., Dominic C.}}<br />
<br />
== New Business ==<br />
<br />
* Change financial year - Treasurer<br />
** Currently, our fiscal year is December 1 through November 30<br />
** Decision: Change our fiscal year to match the calendar year.<br />
<br />
* Budgeting discussion - Treasurer<br />
** This is a long term project.<br />
** Hoping to have a budgeting plan in place by the beginning of 2017<br />
** When in place, BDs will have to provide a planned budget for the year<br />
<br />
* Review and approve following:<br />
** Definitions Document<br />
*** {{todo|who=Board of Directors|what=Review the Definitions Document}}<br />
** Nametag Policy v0.2<br />
*** Strike the security<br />
*** {{todo|who=Kip|what=Start a new thread about the nametag policy|done=0}}<br />
** New Area Commissioning Policy<br />
** Workload Policies<br />
** Suggestion to split all of the these policies into seperate threads and work them all out on line.<br />
<br />
* Maker Academy Director appointment and draft strategic plan<br />
** Motion to appoint Laura Scholl as the Maker Academy program director<br />
** Motion passes<br />
<br />
* Discuss “tragedy of the commons” problems re: woodshop<br />
<br />
== Announcements ==<br />
<br />
* Exploration Place wants to formalize our relationship for next year.<br />
* The President will soon set a quarterly formal board meeting to discuss our future direction and address policy.<br />
* The President will soon release a calendar when the agenda will be open and closed for submissions and requested items and documentation for agenda submissions.<br />
<br />
== General Topics and TODOs ==<br />
<br />
== Decision Summary ==<br />
{{decision-summary}}<br />
<br />
== Task Summary ==<br />
{{todo-summary}}</div>Dominic Canarehttps://wiki.makeict.org/index.php?title=Laser_Cutter&diff=4100Laser Cutter2016-08-05T17:11:25Z<p>Dominic Canare: /* Workflow */</p>
<hr />
<div>{{Infobox lasercutter<br />
|machineName = Rabbit RL-80-1290 Laser engraving/cutting machine<br />
|image = Laser_cutter.jpg<br />
|caption = Rabbit Laser Cutter<br />
|bedSize = 1200 x 900 mm (47.2 x 35.4 inches)<br />
|laserPower = 80W<br />
|laserType = Sealed CO2 laser tube<br />
|bedHeight = ~10 inches<br />
|cutSpeed = 36,000 mm/min<br />
|engraveSpeed = 60,000 mm/min<br />
|engraveResolution = 1000 DPI<br />
|manual = RL-80-1290_User_Manual.pdf<br />
|website = http://www.rabbitlaserusa.com/laser_RL1290.html<br />
|websiteText = Rabbit RL-80-1290 Product Page<br />
}}<br />
The '''Laser cutter''' cuts or engraves digital designs on a variety of materials. Laser cutting is a great way to rapidly prototype projects. <br />
<br />
A certification workshop, hosted by an approved instructor, is required of all members before using the laser cutter. Workshops are posted on the [http://makeict.org/calendar calendar]. Peer certification is not an approved path for use of the laser cutter.<br />
<br />
Interfacing with the laser cutter is performed with [[Media:LaserCut_v5.3.zip|LaserCut v5.3]].<br />
<br />
The laser cutter does require regular cleaning and alignment. This is to be performed by trained volunteers only.<br />
<br />
== Usage ==<br />
=== Safety ===<br />
Laser cutters pose a fire hazard. A high intensity beam of laser light can produce extremely high temperatures as it comes into contact with the materials it is engraving, marking, or cutting. When using the laser cutter, remember:<br />
# You may only use the laser cutter if you have been officially certified according to the machine access policy<br />
# '''Never''' leave the laser cutter unattended while it was powered on (even if it is not firing)<br />
# '''Never''' cut materials that you don't know are safe<br />
# '''Never''' override laser cutter safeties and switches<br />
# Know what to do if a fire happens<br />
## Hint: Hit the big, red, emergency stop button. This will shutdown the laser and the air supply.<br />
## A Carbon Dioxide (CO<sub>2</sub>) fire extinguisher is located next to the laser cutter<br />
<br />
=== Before starting the laser cutter===<br />
# Check the coolant window in the back of the chiller before starting any project.<br />
# Check that the screen in the collection bin is clean and the bin is empty.<br />
<br />
=== After starting the laser cutter ===<br />
# Before cutting make sure the air compressor and the fan motor are on<br />
# '''Home the head!'''<br />
::* If you do not do this, you may crash the head, which is not good.<br />
# Refer to the cutting manual for appropriate engraving and speed and power settings for varied materials<br />
# Beware of flammable materials while using the machines.<br />
<br />
=== Workflow ===<br />
# [[Designing for the laser cutter | Create design or import]]<br/>If importing, unite lines (under Tools menu)<br />
# Separate layers if necessary (by changing their colors)<br />
# Set layer modes<br />
# Set layer [https://docs.google.com/spreadsheets/d/1hcqsFkV4aHuBDUGRR3EMf2EvZ3JzLvBElitJjpwiENA/edit speeds/powers]<br />
# Set origin (under Laser menu)<br />
# Download<br />
## Delete all<br />
## Download current<br />
# Load media into cutter<br />
# Focus laser (in center of media)<br />
# Move laser to origin<br />
# Run box / test<br />
# Close lid and start<br />
# After cut is finished allow ~30 seconds before opening to vent smoke/fumes<br />
<br />
=== When Finished ===<br />
<br />
# Home the head<br />
# Remove media and clear debris<br />
# Power off<br />
<br />
=== Common Issues ===<br />
* Edges of cut pieces are slanted, rather than straight.<br />
::''The Laser is out of alignment and needs to be adjusted. Notify the Fab Lab BD.''<br />
* The head crashes when approaching the left or bottom of the bed.<br />
::''The head must be homed before starting to cut. If it isn't homed there is a risk of crashing the head, which is a bad thing.''<br />
* Bed only travels downwards.<br />
::''The focus probe is stuck in the triggered position. Wiggle it loose and make sure nothing jammed.''<br />
*Focus probe is broken.<br />
::''There are spares in the kit in the cabinet on the left-hand side of the laser. When putting a thicker material in the cutter remember to lower the bed before moving the head.''<br />
* Fumes are not venting well.<br />
::''Make sure that the screen in the collection bin under the bed is clean.''<br />
* Unexpectedly wide rotary attachment dimensions<br />
::''Machine Options > Worktable > RY axis pulse unit = .018238''<br />
<br />
== Materials ==<br />
Cutting a bad material in the laser cutter can be dangerous. Only approved materials should be cut, and banned materials should never be placed in or even around the laser cutter. Cutting an unknown material risks bodily harm and damage to equipment/facilities.<br />
<br />
[https://docs.google.com/spreadsheets/d/1hcqsFkV4aHuBDUGRR3EMf2EvZ3JzLvBElitJjpwiENA/edit For speed and power settings with different materials, please look at and contribute to this shared spreadsheet.]<br />
<br />
=== Approved materials ===<br />
{| class="wikitable sortable"<br />
|-<br />
! Name !! Notes !! Warnings<br />
|-<br />
| <div style="background-color:#009900; color:#ffffff;">Acrylic (aka Plexiglas, Lucite, PMMA)</div> || Cuts well, leaves a smooth polished edge. Higher powers can leave smoke/scorch marks along edges. Some people remove paper/plastic protection sheets before cutting. ||<br />
|-<br />
| <div style="background-color:#009900; color:#ffffff;">Cardboard</div> || Cuts well, can catch fire || FIRE hazard!<br />
|-<br />
| <div style="background-color:#009900; color:#ffffff;">Ceramic</div> || '''Engraving only''' || '''Mirror surfaces can reflect the laser beam'''<br />
|-<br />
| <div style="background-color:#009900; color:#ffffff;">Cloth (cotton, felt, hemp)</div> || Cuts easily || NO plastic coated or impregnated cloth!<br />
|-<br />
| <div style="background-color:#009900; color:#ffffff;">Corian</div> || ||<br />
|-<br />
| <div style="background-color:#009900; color:#ffffff;">Cork</div> || Cuts nicely, the quality of the cut depends on the thickness and quality of the cork. Engineered cork has a lot of glue in it, may not cut nicely. || <br />
|-<br />
| <div style="background-color:#009900; color:#ffffff;">Coroplast (corrugated plastic)</div> || Difficult to cut through cleanly, due to the ribs. Multiple passes are usually needed. || <br />
|-<br />
| <div style="background-color:#009900; color:#ffffff;">Delrin</div> || Comes in a number of shore strengths ([http://www.matweb.com/reference/rockwell-hardness.aspx hardness]), the harder tends to work better. Great for gears! || <br />
|-<br />
| <div style="background-color:#009900; color:#ffffff;">Glass</div> || Has a sandblasted look, #009900 glass works best || '''Mirror surfaces can reflect the laser beam'''<br />
|-<br />
| <div style="background-color:#009900; color:#ffffff;">Leather, suede</div> || Leather is very hard to cut, can be if thinner than a belt thickness || <br />
|-<br />
| <div style="background-color:#009900; color:#ffffff;">MDF, engineered woods</div> || May experience a higher amount of charring when cut || <br />
|-<br />
| <div style="background-color:#009900; color:#ffffff;">Magnetic sheet</div> || Cuts easily || <br />
|-<br />
| <div style="background-color:#009900; color:#ffffff;">Stone/Granite/Marble/etc.</div> || '''Engraving only''' || '''Mirror surfaces can reflect the laser beam''' <br />
|-<br />
| <div style="background-color:#009900; color:#ffffff;">Matte Board</div> || || <br />
|-<br />
| <div style="background-color:#009900; color:#ffffff;">Melamine</div> || || <br />
|-<br />
| <div style="background-color:#009900; color:#ffffff;">Mylar</div> || Works well if it's thin. Thick mylar has a tendency to warp, bubble, and curl || Gold coated mylar will not work<br />
|-<br />
| <div style="background-color:#009900; color:#ffffff;">Paper, card stock</div> || || <br />
|-<br />
| <div style="background-color:#009900; color:#ffffff;">Plywood, composite woods</div> || Contain glue, and may not cut as well as solid wood || <br />
|-<br />
| <div style="background-color:#009900; color:#ffffff;">Pressboard</div> || ||<br />
|-<br />
| <div style="background-color:#009900; color:#ffffff;">NON-CHLORINE Rubber</div> || '''DO NOT CUT''' unless the rubber compound has been tested || '''Beware chlorine-containing rubber!''' If you're not sure, assume you've got chlorinated rubber, and don't cut it.<br />
|-<br />
| <div style="background-color:#009900; color:#ffffff;">Tile</div> || || '''Mirror surfaces can reflect the laser beam''' <br />
|-<br />
| <div style="background-color:#009900; color:#ffffff;">Wood</div> || Avoid oily/resinous woods || FIRE - Cutting oily woods, or very resinous woods can catch fire.<br />
|-<br />
| <div style="background-color:#009900; color:#ffffff;">Wood Veneer</div> || Contain glue, and may not cut as well as solid wood || <br />
|-<br />
| <div style="background-color:#009900; color:#ffffff;">Anodized Aluminum</div> ||'''Engraving only.''' Vaporizes the anodized layer away || <br />
|-<br />
| <div style="background-color:#009900; color:#ffffff;">Bare Metals</div> || || <br />
|-<br />
| <div style="background-color:#009900; color:#ffffff;">Brass</div> || ||<br />
|-<br />
| <div style="background-color:#009900; color:#ffffff;">Coated Metals</div> || || || <br />
|-<br />
| <div style="background-color:#009900; color:#ffffff;">Painted Metals</div> || '''Engraving only.''' Vaporizes the paint away || <br />
|-<br />
| <div style="background-color:#009900; color:#ffffff;">Stainless Steel</div> || || <br />
|-<br />
| <div style="background-color:#009900; color:#ffffff;">Titanium</div> || || <br />
|}<br />
<br />
=== Banned materials ===<br />
These materials should '''never''' be processed in the laser cutter.<br />
{| class="wikitable sortable"<br />
|-<br />
! Name !! DANGER !! WARNING <br />
|-<br />
| <div style="background-color:#cc3333; color:#ffffff;">ABS (acrylonitrile butadiene styrene)</div> || Emits cyanide gas and tends to melt || ABS does not cut well in a laser cutter. It tends to melt rather than vaporize, and has a higher chance of catching on fire and leaving behind melted gooey deposits on the vector cutting grid. It also does not engrave well (again, tends to melt).<br />
|-<br />
| <div style="background-color:#cc3333; color:#ffffff;">Chlorinated plastics (PVC/Poly Vinyl Chloride, vinyl/pleather/artificial leather)</div> || Emits pure chlorine gas when cut! || '''Don't ever cut this material''' as it will ruin the optics, cause the metal of the machine to corrode, and ruin the motion control system. Bubbles yellow, smokes alot, STINKS!!!!!<br />
|-<br />
| <div style="background-color:#cc3333; color:#ffffff;">Coated Carbon Fiber</div> || Emits noxious fumes || A mix of two materials. Thin carbon fiber mat can be cut, with some fraying - but not when coated <br />
|-<br />
| <div style="background-color:#cc3333; color:#ffffff;">Fiberglass</div> || Emits fumes || It's a mix of two materials that cant' be cut. Glass (etch, no cut) and epoxy resin (fumes) <br />
|-<br />
| <div style="background-color:#cc3333; color:#ffffff;">Galvanized metal</div> || Emits dangerous fumes || Zinc fumes are poisonous. Galvanized metal should never be super heated (so don't weld on it either). <br />
|-<br />
| <div style="background-color:#cc3333; color:#ffffff;">Metal</div> || || [https://en.wikipedia.org/wiki/Laser_cutting#Power_consumption Power needed for LASER to cut metal]<br />
|-<br />
| <div style="background-color:#cc3333; color:#ffffff;">Milk bottles/HDPE</div> || Catches fire and melts || It melts, gets gooey. DON'T. Someone has to clean the hex worktable.<br />
|-<br />
| <div style="background-color:#cc3333; color:#ffffff;">Mirrored surfaces</div> || Will not cut, reflects laser beam || Mirror surfaces can reflect the laser beam, damaging the cutter's interior components. Some mirrored materials can be placed reflective-side down and cut.<br />
|-<br />
| <div style="background-color:#cc3333; color:#ffffff;">Polycarbonate/Lexan</div> || Cut very poorly, disbackground-color, catch fire || Polycarbonate is often found as flat, sheet material. The window of the laser cutter is made of Polycarbonate because polycarbonate strongly absorbs infrared radiation! This is the frequency of light the laser cutter uses to cut materials, so it is very ineffective at cutting polycarbonate. Polycarbonate is a poor choice for laser cutting. <br />
|-<br />
| <div style="background-color:#cc3333; color:#ffffff;">PolyPropylene Foam</div> || Catches fire || Like PolyStyrene, it melts, catches fire, and the melted drops continue to burn and turn into rock-hard drips and pebbles. <br />
|-<br />
| <div style="background-color:#cc3333; color:#ffffff;">PolyStyrene Foam</div> || Catches fire || Like PolyPropylene. It catches fire, it melts, and only thin pieces cut. '''This is the #1 material that causes laser fires!!!'''<br />
|-<br />
| <div style="background-color:#cc3333; color:#ffffff;">Pressure treated wood</div> || Emits dangerous fumes || Should never be burned -- not in your fireplace, and definitely not in our LASER<br />
|-<br />
| <div style="background-color:#cc3333; color:#ffffff;">Printed circuit board (FR4 and other material types)</div> || || <br />
|}<br />
<br />
== Other resources ==<br />
=== On this wiki ===<br />
* [[Designing for the laser cutter]]<br />
* [[:Category:SVG files]] practice shapes for first projects<br />
* [[Media:LaserCut_v5.3.zip|LaserCut v5.3]]<br />
=== External links ===<br />
* [http://makezine.com/2011/09/22/identifying-unknown-plastics/ Identifying Unknown Plastics by Make Magazine]<br />
* [https://en.wikipedia.org/wiki/Beilstein_test Beilstein test]<br />
* [https://vimeo.com/1615418 Polymer Identification (video) by Burnination]<br />
* [http://www.chymist.com/Polymer%20Identification.pdf Polymer Identification (PDF) by David A. Katz]<br />
* [http://www.nclark.net/Density_Column.pdf Density Column Using Recyclable Plastics]<br />
* [http://www.thingiverse.com/tag:lasercut Thingiverse Laser Cut projects]<br />
<br />
== Laser Cutter Authorized Users ==<br />
To see authorized users expand this section ---><br />
<div class="toccolours mw-collapsible mw-collapsed" style=""><br />
{| class="wikitable sortable"<br />
|-<br />
! Name !! Authorization Date<br />
|-<br />
| [[User:Amy Dorsch|Amy Dorsch]] || 2016-04-30<br />
|-<br />
| [[User:Paul Sheets|Paul Sheets]] || 2016-05-18<br />
|-<br />
| [[User:Aaron Rivers|Aaron Rivers]] || 2016-02-27<br />
|-<br />
| [[User:Anna Lenhart-Murray|Anna Lenhart-Murray]] || 2015-12-16<br />
|-<br />
| [[User:Audrey Barba|Audrey Barba]] || 2015-12-14<br />
|-<br />
| [[User:Bob Jackson|Bob Jackson]] || 2016-02-27<br />
|-<br />
| [[User:Bonnie Thurman|Bonnie Thurman]] || 2016-03-28<br />
|-<br />
| [[User:Brad Cooley|Brad Cooley]] || 2015-11-16<br />
|-<br />
| [[User:Brian Hertz|Brian Hertz]] || 2015-12-18<br />
|-<br />
| [[User:Brock Milford|Brock Milford]] || 2015-12-16<br />
|-<br />
| [[User:Bryan Barr|Bryan Barr]] (instructor) || 2015-08-07<br />
|-<br />
| [[User:Cat Barba-Abay|Cat Barba-Abay]] || 2015-12-16<br />
|-<br />
| [[User:Charles Griesel|Charles Griesel]] || 2015-12-02<br />
|-<br />
| [[User:Charlie Fair|Charlie Fair]] || 2015-11-11<br />
|-<br />
| [[User:Chris Batcheller|Chris Batcheller]] || 2015-12-14<br />
|-<br />
| [[User:Chris Lofland|Chris Lofland]] || 2016-02-27<br />
|-<br />
| [[User:Chris Strait|Chris Strait]] || 2016-05-18<br />
|-<br />
| [[User:Christy Bennett|Christy Bennett]] || 2016-04-30<br />
|-<br />
| [[User:Christian Kindel|Christian Kindel]] || 2015-12-12<br />
|-<br />
| [[User:Cindy Conrad|Cindy Conrad]] || 2016-03-28<br />
|-<br />
| [[User:Cory Kertz|Cory Kertz]] || 2015-11-11<br />
|-<br />
| [[User:Coty Sandfort|Coty Sandfort]] || 2016-04-30<br />
|-<br />
| [[User:Curt Gridley|Curt Gridley]] || 2015-12-12<br />
|-<br />
| [[User:Dale Morrow|Dale Morrow]] || 2016-06-21<br />
|-<br />
| [[User:Dana Danaver|Dana Danaver]] || 2015-12-05<br />
|-<br />
| [[User:Daniel Towle|Daniel Towle]] || 2015-12-20<br />
|-<br />
| [[User:David Graver|David Graver]] || 2016-06-21<br />
|-<br />
| [[User:David Springs|David Springs]] || 2015-09-19<br />
|-<br />
| [[User:Dean Day|Dean Day]] || 2015-12-12<br />
|-<br />
| [[User:Dominic Canare|Dominic Canare]] (instructor) || 2015-12-02<br />
|-<br />
| [[User:Douglas Stice|Douglas Stice]] || 2016-04-30<br />
|-<br />
| [[User:Doug Wilson|Doug Wilson]] || 2016-03-28<br />
|-<br />
| [[User:Dustin Richey|Dustin Richey]] || 2016-01-16<br />
|-<br />
| [[User:Ed Hutson|Ed Hutson]] || 2016-05-18<br />
|-<br />
| [[User:Eric Sommer|Eric Sommer]] || 2016-04-30<br />
|-<br />
| [[User:Ernest Sharp|Ernest Sharp]] || 2016-03-28<br />
|-<br />
| [[User:Gayle Thomas|Gayle Thomas]] || 2016-05-18<br />
|-<br />
| [[User:Geoffrey Kisch|Geoffrey Kisch]] || 2015-12-05<br />
|-<br />
| [[User:H. Robert Shultz|H. Robert Shultz]] || 2016-04-30<br />
|-<br />
| [[User:Helen Haskin|Helen Haskin]] || 2015-12-16<br />
|-<br />
| [[User:Henry Gridley|Henry Gridley]] || 2016-05-18<br />
|-<br />
| [[User:Ivan Quiroz|Ivan Quiroz]] || 2015-11-16<br />
|-<br />
| [[User:JaiPal Chauhan|JaiPal Chauhan]] || 2016-06-21<br />
|-<br />
| [[User:James A Seymour|James Seymour]] || 2015-12-12<br />
|-<br />
| [[User:James Classen|James Classen]] || 2015-11-11<br />
|-<br />
| [[User:James Dorsch|James Dorsch]] || 2016-04-30<br />
|-<br />
| [[User:James Lancaster|James Lancaster]] || 2015-12-05<br />
|-<br />
| [[User:James Tennant|James Tennant]] || 2016-05-18<br />
|-<br />
| [[User:Jeremiah Loder|Jeremiah Loder]] || 2015-12-14<br />
|-<br />
| [[User:Jerry Carpenter|Jerry Carpenter]] || 2015-08-07<br />
|-<br />
| [[User:Jerry Shubert|Jerry Shubert]] || 2015-11-11<br />
|-<br />
| [[User:Jesse Lee|Jesse Lee]] || 2016-01-16<br />
|-<br />
| [[User:Jim Hammer|Jim Hammer]] || 2015-12-12<br />
|-<br />
| [[User:Joe Groom|Joe Groom]] || 2016-04-30<br />
|-<br />
| [[User:Joe Lobdell|Joe Lobdell]] || 2016-02-27<br />
|-<br />
| [[User:Joel Ewy|Joel Ewy]] || 2015-12-05<br />
|-<br />
| [[User:jralexan1|John Alexander]] (instructor) || 2015-12-02<br />
|-<br />
| [[User:John Harrison|John Harrison]] || 2015-10-30<br />
|-<br />
| [[User:Jonny Fosnight|Jonny Fosnight]] || 2015-11-16<br />
|-<br />
| [[User:Joseph Woolridge|Joseph Woolridge]] || 2016-03-28<br />
|-<br />
| [[User:Judah Hansen|Judah Hansen]] || 2015-12-20<br />
|-<br />
| [[User:Julie Chen|Julie Chen]] || 2016-05-18<br />
|-<br />
| [[User:Karyn Bell-Simon|Karyn Bell-Simon]] || 2016-01-16<br />
|-<br />
| [[User:Keith Rowley|Keith Rowley]] || 2016-02-27<br />
|-<br />
| [[User:Kenton Hansen|Kenton Hansen]] || 2015-12-20<br />
|-<br />
| [[User:Kevin Elledge|Kevin Elledge]] || 2015-12-14<br />
|-<br />
| [[User:Kim Lujan|Kim Lujan]] || 2015-12-18<br />
|-<br />
| [[User:Kip Landwehr|Kip Landwehr]] || 2015-12-18<br />
|-<br />
| [[User:Kyle McCormick|Kyle McCormick]] || 2016-05-18<br />
|-<br />
| [[User:Larry Frank|Larry Frank]] || 2016-03-28<br />
|-<br />
| [[User:Logan Pajunen|Logan Pajunen]] || 2015-11-11<br />
|-<br />
| [[User:Marc Lujan|Marc Lujan]] || 2016-02-27<br />
|-<br />
| [[User:Marc Roths|Marc Roths]] || 2016-06-21<br />
|-<br />
| [[User:Marcus Mosley|Marcus Mosley]] || 2015-12-20<br />
|-<br />
| [[User:Mark Esau|Mark Esau]] || 2015-12-20<br />
|-<br />
| [[User:Mark Reuter|Mark Reuter]] || 2016-05-18<br />
|-<br />
| [[User:Marty Boyzuck|Marty Boyzuck]] || 2016-02-27<br />
|-<br />
| [[User:Matthew Pewewardy|Matthew Pewewardy]] || 2016-03-28<br />
|-<br />
| [[User:Melanie Jenney|Melanie Jenney]] || 2015-12-14<br />
|-<br />
| [[User:Melissa Soutiere|Melissa Soutiere]] || 2015-12-14<br />
|-<br />
| [[User:Michael Grudowski|Michael Grudowski]] || 2016-05-18<br />
|-<br />
| [[User:Mike Barushok|Mike Barushok]] || 2015-12-18<br />
|-<br />
| [[User:Mike Doolittle|Mike Doolittle]] (instructor) || 2015-08-07<br />
|-<br />
| [[User:Mike Hutton|Mike Hutton]] || 2015-11-11<br />
|-<br />
| [[User:Mike McKown|Mike McKown]] || 2016-04-30<br />
|-<br />
| [[User:Mitzi Trout|Mitzi Trout]] || 2015-12-18<br />
|-<br />
| [[User:Nathan Huff|Nathan Huff]] || 2016-02-27<br />
|-<br />
| [[User:Paul Poirier|Paul Poirier]] || 2016-03-28<br />
|-<br />
| [[User:Paul Wilson|Paul Wilson]] || 2015-12-20<br />
|-<br />
| [[User:Rick Boyd|Rick Boyd]] || 2015-12-20<br />
|-<br />
| [[User:Sam Jossie|Sam Jossie]] || 2016-02-27<br />
|-<br />
| [[User:Samuel McConnell|Samuel McConnell]] || 2015-12-02<br />
|-<br />
| [[User:Samuel Schurter|Samuel Schurter]] || 2015-12-05<br />
|-<br />
| [[User:Shawn Achenbach|Shawn Achenbach]] || 2016-02-27<br />
|-<br />
| [[User:Skyler Lovelace|Skyler Lovelace]] || 2015-12-02<br />
|-<br />
| [[User:Stephan Reckers|Stephan Reckers]] || 2015-11-16<br />
|-<br />
| [[User:Steve Owens|Steve Owens]] || 2016-04-30<br />
|-<br />
| [[User:Steve Saner|Steve Saner]] || 2016-01-16<br />
|-<br />
| [[User:Stuart Smith|Stuart Smith]] || 2015-12-14<br />
|-<br />
| [[User:Tammy Arnott|Tammy Arnott]] || 2016-02-27<br />
|-<br />
| [[User:Terry Weatherson|Terry Weatherson]] || 2016-01-16<br />
|-<br />
| [[User:Thomas Bloom|Thomas Bloom]] || 2015-12-12<br />
|-<br />
| [[User:Tom McGuire|Tom McGuire]] || 2015-08-07<br />
|-<br />
| [[User:Turquoise Thomas|Turquoise Thomas]] || 2016-06-21<br />
|-<br />
| [[User:Tyler Ball|Tyler Ball]] || 2016-01-16<br />
|-<br />
| [[User:Valerie Lillich|Valerie Lillich]] || 2016-06-21<br />
|-<br />
| [[User:Weston Vice|Weston Vice]] || 2015-12-05<br />
|-<br />
| [[User:William Davisson|William Davisson]] || 2015-12-18<br />
|-<br />
| [[User:Aaron Weaver|Aaron Weaver]] || 2016-06-15<br />
|-<br />
| [[User:Adam Wiley|Adam Wiley]] || 2016-06-15<br />
|-<br />
| [[User:Alex Kern|Alex Kern]] || 2016-06-15<br />
|-<br />
| [[User:Alexander Melton|Alexander Melton]] || 2016-06-15<br />
|-<br />
| [[User:Bruce Barley|Bruce Barley]] || 2016-06-15<br />
|-<br />
| [[User:Holly Arnold|Holly Arnold]] || 2016-06-15<br />
|-<br />
| [[User:Jake Ferrell|Jake Ferrell]] || 2016-06-15<br />
|-<br />
| [[User:Jared Stafford|Jared Stafford]] || 2016-06-15<br />
|-<br />
| [[User:Jess Bechtelheimer|Jess Bechtelheimer]] || 2016-06-15<br />
|-<br />
| [[User:John Clark|John Clark]] || 2016-06-15<br />
|-<br />
| [[User:Kurt Hershey|Kurt Hershey]] || 2016-06-15<br />
|-<br />
| [[User:Larame Cline|Larame Cline]] || 2016-06-15<br />
|-<br />
| [[User:Larry Roth|Larry Roth]] || 2016-06-15<br />
|-<br />
| [[User:Larry Wynn|Larry Wynn]] || 2016-06-15<br />
|-<br />
| [[User:Michele Pugh|Michele Pugh]] || 2016-06-15<br />
|-<br />
| [[User:Mike Arnold|Mike Arnold]] || 2016-06-15<br />
|-<br />
| [[User:Mike Brennison|Mike Brennison]] || 2016-06-15<br />
|-<br />
| [[User:Resha Parajuli|Resha Parajuli]] || 2016-06-15<br />
|-<br />
| [[User:Stuart Smith|Stuart Smith]] || 2016-06-15<br />
|-<br />
| [[User:Tim Otter|Tim Otter]] || 2016-06-15<br />
|-<br />
|}<br />
</div><br />
<br />
<br />
[[Category:FabLab Equipment]]</div>Dominic Canarehttps://wiki.makeict.org/index.php?title=July_11_2016&diff=4054July 11 20162016-07-18T03:54:40Z<p>Dominic Canare: /* Roll Call */</p>
<hr />
<div>== Roll Call ==<br />
* Board members<br />
** Barb Davis<br />
** Christian Kindel<br />
** Curt Gridley<br />
** Dominic Canare<br />
** James Lancaster<br />
** John Alexander<br />
** Kip Landwehr<br />
** Logan Pajunen<br />
** Tracy Hoover<br />
* Members<br />
** David Springs<br />
** Jeff Eck<br />
** Jeremiah Loder<br />
** Jerry Carpenter<br />
** Kirk Lancaster<br />
** Mike Barushok<br />
** Mike Hutton<br />
** Tom McGuire<br />
* Guests<br />
** Kerry Majher<br />
<br />
== Officer Reports ==<br />
* Secretary: Acceptance of previous meeting minutes<br />
** {{decision|Meeting minutes for June 27, 2016 are accepted.}}<br />
<br />
* [https://drive.google.com/open?id=0B5SKHZE7etceWlFWOEFqZEc4R1U Treasurer's Report]<br />
<br />
== Old Business ==<br />
* ArtDOG thank you letters have been sent<br />
<br />
* Bus Updates<br />
** Logan and Jeremiah are going to have a work day<br />
<br />
* Insurance Updates<br />
** No new updates<br />
<br />
* Tom - Updates from landlord regarding funding AC<br />
** No updates<br />
<br />
* Outreach and Maker Academy director search updates<br />
** Dominic will take the lead on this search <br />
<br />
* Barb - Maker Faire Updates<br />
** Logan, Tom, John, Barb, Dom, and James L would like to be on the review committee<br />
<br />
* {{todo|who=Logan|what=Attempt to find where the leak in the classroom is coming from.|done=0}}<br />
<br />
* {{todo|who=Logan|what=Put rain cap on chimney while on the roof looking for the entry point of the leak.|done=0}}<br />
<br />
* Kerry on Mini Maker Faire at Barnes and Noble<br />
** This is the 2nd year<br />
** Book sale fundraiser:<br />
*** MakeICT would fit into the criteria to do this<br />
*** If people come in on the specified day and say they are supporting MakeICT, a percent of the purchase comes back to MakeICT<br />
** What kinds of things would MakeICT want/need to bring, so as to not duplicate things that Barnes and Noble will already be showing?<br />
*** Duplicates aren't necessarily a bad thing.<br />
** Makers get an audience at a certain time slot, not a booth for the day<br />
<br />
== New Business ==<br />
* Dominic - Change public email and phone responsibilities<br />
** Currently, info@makeict.org is managed by Dominic and Jens. Jens is no longer a board member, and Dominic would like to hand this to someone else.<br />
** All phone calls also go to Dominic's phone and he would like to step away from that as well.<br />
** Volunteers to take either of these things<br />
*** Email:<br />
**** Curt Gridley<br />
**** James Lancaster<br />
*** Phone:<br />
**** Logan Pajunen<br />
**** Forward voicemail to info@makeict.org<br />
<br />
* Dominic - United Way GIV appointments<br />
** {{todo|who=Dominic and Logan|when=July 25,2016 at 7:15|what=Go to our United Way GIV appointment.}}<br />
<br />
* Studio Concerns<br />
** Jess is pretty set on doing the curtains herself<br />
** {{decision|We have a commitment to our renters to have curtains done by July 25, 2016.}}<br />
** {{todo|who=John|what=Let Jess know that we made a commitment to have studio curtains hung by July 25 and find out if she will have them done by then.|done=0}}<br />
** Potential TODO for Jess: Finish curtains by by July 25.<br />
** Potential TODO for ____: Find a curtain solution by July 25.<br />
<br />
* Seth - OpenWichita<br />
** Moving ahead with Ohana project around open community resource data<br />
** Hackathon winner presentations to city July 20 and 21<br />
<br />
* Project storage policy review<br />
** Do we have any space for large project storage?<br />
** Should we charge by square footage if we define space?<br />
** Think on these things and discuss further at next meeting<br />
** We have a hackables policy on the wiki. [[Electronics_and_Rapid_Prototyping#Hackables_Policy]]<br />
*** {{todo|what=Post the hackables policy on the hackables shelf or other designated hackables dropoff location.|done=0}}<br />
*** Explore idea of a hackables/storage manager<br />
<br />
* Clarify metalshop boundaries<br />
** A member put some things in the metalshop/bike shop area that are too large. Jeremiah asked him on June 27 to have them removed within the week and they are still there. Is it within Jeremiah's power to do somehthing about it?<br />
*** Yes.<br />
*** Jeremiah can handle it OR a board member can talk to the member.<br />
**** Jeremiah thinks it would be better for a board member to have the discussion.<br />
**** {{todo|what=Talk to the member that is leaving large items in the metalshop/bike shop.|done=0}}<br />
<br />
* Discuss forging/casting/blacksmithing<br />
** Concrete explosions are a concern<br />
** Space that this would take up is a concern<br />
** These things are available at Dean's group in Haysville on Monday nights ([http://centralstatesmetalartisans.com Central States Metal Artisans])<br />
** {{todo|who=Logan|what=Post on forum searching for interest in forging, casting, and blacksmithing.|done=0}}<br />
<br />
* Discuss scheduled reviews of departments and BDs for next board meeting<br />
** Schedule Susan and/or Sam to talk at the next meeting about their respective areas and what they need from the Board<br />
<br />
* Discuss ways to increase committee involvement<br />
** Create a list of committees?<br />
<br />
* Electricity usage - green team report, if possible<br />
** Not enough time for this<br />
<br />
== General Topics and TODOs == <br />
* {{decision|Eliminate use of the word certification.}}<br />
* {{todo|who=Logan|what=Post on the forum about the electricity bill with the suggestion that anybody with ideas on how to reduce the bill join the Green Team.|done=0}}<br />
* {{decision|The next meeting will take place on July 25, 2016.}}<br />
<br />
== Decision Summary ==<br />
{{decision-summary}}<br />
<br />
== Task Summary ==<br />
{{todo-summary}}</div>Dominic Canare