Difference between revisions of "LASER Cutter Materials"

Revision as of 06:31, 18 October 2015

Approved Organic Materials

If your material is not on the list, check with Mike

Name	Engrave	Cut	Max thickness	Notes	WARNING
Acrylic (aka Lucite, Plexiglas, PMMA)	x	x	1/2"	Cuts well, leaves a smooth polished edge. Higher powers can leave smoke/scorch marks along edges
Cardboard, cartons	x	x	thicker	Cuts well, can catch fire	FIRE hazard!
Ceramic	x
Cloth (cotton, felt, hemp)	x	x		Cuts easily	NO plastic coated or impregnated cloth!
Corian	x	x
Cork	x	x	1/4"	Cuts nicely, the quality of the cut depends on the thickness and quality of the cork. Engineered cork has a lot of glue in it, may not cut nicely.
Delrin	x	x
Fabric (polyester)	x	x
Fiberglass	x	x
Glass	x
Leather, suede	x	x
MDF, engineered woods	x	x	1/4"	May experience a higher amount of charring when cut
Magnetic sheet	x	x		Cuts easily
Marble	x
Matte Board	x	x
Melamine	x	x
Mylar	x	x	1/16"	Works well if it's thin. Thick mylar has a tendency to warp, bubble, and curl	Gold coated mylar will not work
Paper, card stock	x	x	thin
Plywood, composite woods	x	x	1/4"	Contain glue, and may not cut as well as solid wood
Pressboard	x	x
Rubber	x	x
Tile	x
Wood	x	x	1/4"	Avoid oily/resinous woods	FIRE - Cutting oily woods, or very resinous woods can catch fire.
Wood Veneer	x	x

Approved Metal Materials

Name	Engrave	Notes
Painted Metals	x
Bare Metals	x
Anodized Aluminum	x	Vaporizes the anodization away
Brass	x
Coated Metals	x
Stainless Steel	x
Titanium	x

CO2 lasers will engrave metals when coated with an added metal marking solution.

@@ Line 30: / Line 30: @@
 |-
 | Leather, suede || x || x ||  ||  ||
+|-
+| MDF, engineered woods || x || x || 1/4" || May experience a higher amount of charring when cut ||
 |-
 | Magnetic sheet || x || x ||  || Cuts easily ||
@@ Line 42: / Line 44: @@
 |-
 | Paper, card stock || x || x || thin ||  ||
+|-
+| Plywood, composite woods || x || x || 1/4" || Contain glue, and may not cut as well as solid wood ||
 |-
 | Pressboard || x || x ||  ||  ||