MakeICT Wiki - User contributions [en]

Contact Information

2026-04-26T23:43:17Z

Andyoutside: /* 2025-2026 Board of Directors */

[[Category:Board]]
[[Category:Committees]]
[[Category:Committee Leads]]
[[Category:Area Leads]]
==Policy==

Any active member of MakeICT may have their email forwarded from a makeict.org email address to an email address of their choice. In addition most modern email providers (such as [https://support.google.com/mail/answer/22377?hl=en gmail]) allow users to set their "from" or "reply-to" email address to a confirmed address of their choice.

All executive committee members are encouraged to use their makeict.org emails for all correspondence related to MakeICT. To set up email forwarding, email a request to [mailto:IT@makeict.org. IT@makeict.org.]

==Leadership Contacts==
===2025-2026 Board of Directors===
{| class="wikitable"
!Title
!Individual Email
!Forwards to
!Preferred Email
|-
|President
|[mailto:president@makeict.org president@makeict.org]
|Andy Tannahill
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Vice President
|[mailto:vicepresident@makeict.org vicepresident@makeict.org]
|Stephan Reckers
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Secretary
|[mailto:secretary@makeict.org secretary@makeict.org]
|Paul Shackelford
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Treasurer
|[mailto:treasurer@makeict.org treasurer@makeict.org]
|Aaron Grindstaff
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Director At Large
|[mailto:Tessa.Garlough-Jones@makeict.org Tessa.Garlough-Jones@makeict.org]
|Tessa Garlough-Jones
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Director At Large
|[mailto:Piper.Thomass@makeict.org Piper.Thomas@makeict.org]
|Piper Thomas
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Director At Large
|[mailto:dean.day@makeict.org Dean.Day@makeict.org]
|Dean Day
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Director At Large
|[mailto:cooper.cummings@makeict.org Cooper.Cummings@makeict.org]
|Cooper Cummings
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Immediate Past President
|[mailto:Gretchen.Koch@makeict.org Gretchen.Koch@makeict.org]
|Gretchen Koch
|[mailto:directors@makeict.org directors@makeict.org]

|}

===Committee Leads===
MakeICT Committee leads are appointed by the board of directors as needed, with an on-purpose review every September.

{| class="wikitable"
!Committee
!Committee Email
!Lead
|-
|-
|'''[[Classroom Committee]]'''
*Schedules classes and rentals for events
|[Mailto:classroom.management@makeict.org%7Cclassroom.management@makeict.org classroom.management@makeict.org]
|[[User:LaDeana Dockery|LaDeana Dockery]] [mailto:ladeana.dockery@makeict.org ladeana.dockery@makeict.org]
|-
|'''[[Communications Committee]]'''
*Gather stories about our coolest tools, events, programs and makers
*Distribute needed information to our members
*Make sure we are represented across social media platforms
*Create signs, flyers, and brochures for marketing
*Lead efforts to keep our wiki up to date
|[Mailto:Communications@makeict.org%7CCommunications@makeict.org communications@makeict.org]
[Mailto:socialmedia@makeict.org%7Csocialmedia@makeict.org socialmedia@makeict.org]
|Logan Falletti-Wright
|-
|'''[[Events Committee]]'''
*planning, setup, and managing of events relevant to MakeICT
*Indoor Events include: 5th Monday, Seasonal Parties, Vendor Events
*Outdoor Events include Ren Faire, ComicCon, Makerfaire
|[mailto:Events@makeict.org events@makeict.org]
|VACANT
|-
|'''[[Finance Committee]]'''
*Treasurer assistance & oversight
*Budget creation
*Finance and audit procedures
|[Mailto:treasurer@makeict.org%7Ctreasurer@makeict.org treasurer@makeict.org]
|Aaron Grindstaff
|-
|'''[[Fundraising Committee]]'''
*Pursue grant and fundraising opportunities

*Work with communications to make sure donation opportunities are well-publicized
*Recognize donors
|[Mailto:fundraising@makeict.org%7Cfundraising@makeict.org fundraising@makeict.org]
|Aaron Grindstaff
|-
|'''[[IT Committee]]'''
*Manage computers owned by MakeICT
*Maintain the network at our makerspace
*Update tools and applications needed for our website
|[Mailto:it@makeict.org%7Cit@makeict.org it@makeict.org]
|Steve Saner
|-
|'''[[Membership & Community]]'''
*Improve processes for getting new members on board
*Host parties, game nights, potluck meals, and general events that help humans bond
*Give mini-tours of the makerspace
*Assist with Maker Monday
*Check people in for classes
*Review scholarship applications
*Set scholarship guidelines
|[Mailto:membership@makeict.org%7Cmembership@makeict.org membership@makeict.org]
|VACANT
|-
|-
|'''[[Security Committee]]'''
*Manage access to the makerspace
*Address safety concerns
|[Mailto:Security@makeict.org%7Csecurity@makeict.org security@makeict.org]
|Bill Oden
|-
|'''[[Inventory Committee]]'''
*Aid area leads and other committees to keep current inventory up to date

*Create and maintain policies in regards to equipment use and procurement
*Maintain MakeICT's inventory database
|[Mailto:inventory@makeict.org%7CInventory@makeict.org inventory@makeict.org]
|James Lancaster
|-

|}

===Area Leads===

The Makerspace Area Leads and Co-Leads are appointed by the MakeICT board of directors each year in September. They are each responsible for some specific square footage of the makerspace. Area Leads can appoint their own area lead assistants. All of the area leads meet monthly to discuss makerspace issues and ideas.

{| class="wikitable"
!Area
!Area Contact Email
!Lead or Co-Leads
!Assistant(s)
|-
|[[Ceramics]]
|[mailto:ceramics@makeict.org ceramics@makeict.org]
|Tony Reid
|Russell Owens
|-
|[[Electronics and Rapid Prototyping|Electronics]]
|[mailto:electronics@makeict.org electronics@makeict.org]
|Kim Kirwan
|
|-
|[[FabLab Area|Fab Lab]]
|[mailto:fablab@makeict.org fablab@makeict.org]
|Andy T
|-
|[[Facilities Committee|Facilities]]
|[mailto:facilities@makeict.org facilities@makeict.org]
|JaiPal Chauhan
|
|-
|[[Gallery]]
|
|Dean Day
|
|-
|[[Garden Committee|Garden]]
|
|Piper Thomas
|Tessa Garlough-Jones
|-
|[[Jewelry Area|Jewelry]]
|[mailto:jewelry@makeict.org jewelry@makeict.org]
|Ted McMullen
|
|-
|[[Lounge]]
|
|Liam Blakely
|
|-
|[[Metalshop Area|Metal Shop]]
|[mailto:metalshop@makeict.org metalshop@makeict.org]
|John Cummings
|Rustin Atkeisson, John Miranda, Jimmy Tennant
|-
|[[Screenprinting]]
|[mailto:printmaking@makeict.org printmaking@makeict.org]
|[[User:Doug Wilson|Doug Wilson]] doug.wilson@makeict.org
|
|-
|[[Stained Glass Area|Stained Glass]]
|[mailto:stainedglass@makeict.org stainedglass@makeict.org]
|Timothy York
|
|-
|[[Textiles Area|Textiles]]
|[mailto:textiles@makeict.org textiles@makeict.org]
|June Huie
|
|-
|[[Visual Arts Committee|Visual Arts]]
|
|Timothy York
|Kristopher Paxton
|-
|[[Woodshop Area|Wood Shop]]
|[mailto:woodshop@makeict.org woodshop@makeict.org]
|Dave Hanson
|
|-
|[[Welcome Area]]
|
|Gretchen Koch
gretchen.koch@makeict.org
|
|}

===Other Contacts===
{| class="wikitable"
!Title
!Email
!Forwards to
|-
|Director of Operations
|[mailto:operations@makeict.org operations@makeict.org]
|Director of Operations (Currently vacant)
|-
|Information Technology team
|[mailto:IT@makeict.org IT@makeict.org]
|[[IT Committee]]
|-
|Area Leads
|[mailto:leads@makeict.org leads@makeict.org]
|All area leads
|-
|Board of Directors
|[mailto:directors@makeict.org directors@makeict.org]
|Officers and at-large directors
|-
|}

===Board History===
Document containing history of MakeICT Board Members: [https://docs.google.com/spreadsheets/d/1gZEUbq4uhXCztb0pJpDbcsBgloMOW32eDCeRl9cIQqM/ Link to History Page]

Snapmaker U1

2026-01-29T01:30:48Z

Andyoutside:

We have 2 Snapmaker U1s

Slicers for mutli color use Orca Slicer https://orca-slicer.com/#dl

Use the Orca Slicer to send the print to the printers

Snapmaker #1 http://192.168.20.131/

Snapmaker #2 http://192.168.20.207/

Snapmaker U1

2026-01-29T01:30:23Z

Andyoutside: Inital

We have 2 Snapmaker U1s
Slicers for mutli color use Orca Slicer https://orca-slicer.com/#dl
Use the Orca Slicer to send the print to the printers
Snapmaker #1 http://192.168.20.131/
Snapmaker #2 http://192.168.20.207/

Contact Information

2026-01-25T11:53:06Z

Andyoutside: /* Committee Leads */ add Logan Falletti-Wright as communications lead

[[Category:Board]]
[[Category:Committees]]
[[Category:Committee Leads]]
[[Category:Area Leads]]
==Policy==

Any active member of MakeICT may have their email forwarded from a makeict.org email address to an email address of their choice. In addition most modern email providers (such as [https://support.google.com/mail/answer/22377?hl=en gmail]) allow users to set their "from" or "reply-to" email address to a confirmed address of their choice.

All executive committee members are encouraged to use their makeict.org emails for all correspondence related to MakeICT. To set up email forwarding, email a request to [mailto:IT@makeict.org. IT@makeict.org.]

==Leadership Contacts==
===2025-2026 Board of Directors===
{| class="wikitable"
!Title
!Individual Email
!Forwards to
!Preferred Email
|-
|President
|[mailto:president@makeict.org president@makeict.org]
|Andy Tannahill
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Vice President
|[mailto:vicepresident@makeict.org vicepresident@makeict.org]
|Stephan Reckers
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Secretary
|[mailto:secretary@makeict.org secretary@makeict.org]
|Paul Shackelford
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Treasurer
|[mailto:treasurer@makeict.org treasurer@makeict.org]
|Aaron Grindstaff
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Director At Large
|
|Tessa Garlough-Jones
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Director At Large
|
|Piper Thomas
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Director At Large
|[mailto:dean.day@makeict.org Dean.Day@makeict.org]
|Dean Day
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Director At Large
|[mailto:cooper.cummings@makeict.org Cooper.Cummings@makeict.org]
|Cooper Cummings
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Immediate Past President
|[mailto:Gretchen.Koch@makeict.org Gretchen.Koch@makeict.org]
|Gretchen Koch
|[mailto:directors@makeict.org directors@makeict.org]

|}

===Committee Leads===
MakeICT Committee leads are appointed by the board of directors as needed, with an on-purpose review every September.

{| class="wikitable"
!Committee
!Committee Email
!Lead
|-
|-
|'''[[Classroom Committee]]'''
*Schedules classes and rentals for events
|[Mailto:classroom.management@makeict.org%7Cclassroom.management@makeict.org classroom.management@makeict.org]
|[[User:LaDeana Dockery|LaDeana Dockery]] [mailto:ladeana.dockery@makeict.org ladeana.dockery@makeict.org]
|-
|'''[[Communications Committee]]'''
*Gather stories about our coolest tools, events, programs and makers
*Distribute needed information to our members
*Make sure we are represented across social media platforms
*Create signs, flyers, and brochures for marketing
*Lead efforts to keep our wiki up to date
|[Mailto:Communications@makeict.org%7CCommunications@makeict.org communications@makeict.org]
[Mailto:socialmedia@makeict.org%7Csocialmedia@makeict.org socialmedia@makeict.org]
|Logan Falletti-Wright
|-
|'''[[Events Committee]]'''
*planning, setup, and managing of events relevant to MakeICT
*Indoor Events include: 5th Monday, Seasonal Parties, Vendor Events
*Outdoor Events include Ren Faire, ComicCon, Makerfaire
|[mailto:Events@makeict.org events@makeict.org]
|VACANT
|-
|'''[[Finance Committee]]'''
*Treasurer assistance & oversight
*Budget creation
*Finance and audit procedures
|[Mailto:treasurer@makeict.org%7Ctreasurer@makeict.org treasurer@makeict.org]
|Aaron Grindstaff
|-
|'''[[Fundraising Committee]]'''
*Pursue grant and fundraising opportunities

*Work with communications to make sure donation opportunities are well-publicized
*Recognize donors
|[Mailto:fundraising@makeict.org%7Cfundraising@makeict.org fundraising@makeict.org]
|Aaron Grindstaff
|-
|'''[[IT Committee]]'''
*Manage computers owned by MakeICT
*Maintain the network at our makerspace
*Update tools and applications needed for our website
|[Mailto:it@makeict.org%7Cit@makeict.org it@makeict.org]
|Steve Saner
|-
|'''[[Membership & Community]]'''
*Improve processes for getting new members on board
*Host parties, game nights, potluck meals, and general events that help humans bond
*Give mini-tours of the makerspace
*Assist with Maker Monday
*Check people in for classes
*Review scholarship applications
*Set scholarship guidelines
|[Mailto:membership@makeict.org%7Cmembership@makeict.org membership@makeict.org]
|VACANT
|-
|-
|'''[[Security Committee]]'''
*Manage access to the makerspace
*Address safety concerns
|[Mailto:Security@makeict.org%7Csecurity@makeict.org security@makeict.org]
|Bill Oden
|-
|'''[[Inventory Committee]]'''
*Aid area leads and other committees to keep current inventory up to date

*Create and maintain policies in regards to equipment use and procurement
*Maintain MakeICT's inventory database
|[Mailto:inventory@makeict.org%7CInventory@makeict.org inventory@makeict.org]
|James Lancaster
|-

|}

===[[Area Leads]]===

The Makerspace Area Leads and Co-Leads are appointed by the MakeICT board of directors each year in September. They are each responsible for some specific square footage of the makerspace. Area Leads can appoint their own area lead assistants. All of the area leads meet monthly to discuss makerspace issues and ideas.

{| class="wikitable"
!Area
!Area Contact Email
!Lead or Co-Leads
!Assistant(s)
|-
|[[Ceramics]]
|[mailto:ceramics@makeict.org ceramics@makeict.org]
|Tony Reid
|Russell Owens
|-
|[[Electronics and Rapid Prototyping|Electronics]]
|[mailto:electronics@makeict.org electronics@makeict.org]
|Kim Kirwan
|
|-
|[[FabLab Area|Fab Lab]]
|[mailto:fablab@makeict.org fablab@makeict.org]
|Andy T
|-
|[[Facilities Committee|Facilities]]
|[mailto:facilities@makeict.org facilities@makeict.org]
|JaiPal Chauhan
|
|-
|[[Gallery]]
|
|Dean Day
|
|-
|[[Garden Committee|Garden]]
|
|Piper Thomas
|Tessa Garlough-Jones
|-
|[[Jewelry Area|Jewelry]]
|[mailto:jewelry@makeict.org jewelry@makeict.org]
|Ted McMullen
|
|-
|[[Lounge / Breakroom]]
|
|Matthew Cleary
|
|-
|[[Metalshop Area|Metal Shop]]
|[mailto:metalshop@makeict.org metalshop@makeict.org]
|John Cummings
|Rustin Atkeisson, John Miranda, Jimmy Tennant
|-
|[[Screenprinting]]
|[mailto:printmaking@makeict.org printmaking@makeict.org]
|[[User:Doug Wilson|Doug Wilson]] doug.wilson@makeict.org
|
|-
|[[Stained Glass Area|Stained Glass]]
|[mailto:stainedglass@makeict.org stainedglass@makeict.org]
|Timothy York
|
|-
|[[Textiles Area|Textiles]]
|[mailto:textiles@makeict.org textiles@makeict.org]
|June Huie
|
|-
|[[Visual Arts Committee|Visual Arts]]
|
|Timothy York
|Kristopher Paxton
|-
|[[Woodshop Area|Wood Shop]]
|[mailto:woodshop@makeict.org woodshop@makeict.org]
|Dave Hanson
|
|-
|[[Welcome Area]]
|
|Gretchen Koch
gretchen.koch@makeict.org
|
|}

===Other Contacts===
{| class="wikitable"
!Title
!Email
!Forwards to
|-
|Director of Operations
|[mailto:operations@makeict.org operations@makeict.org]
|Director of Operations (Currently vacant)
|-
|Information Technology team
|[mailto:IT@makeict.org IT@makeict.org]
|[[IT Committee]]
|-
|Area Leads
|[mailto:leads@makeict.org leads@makeict.org]
|All area leads
|-
|Board of Directors
|[mailto:directors@makeict.org directors@makeict.org]
|Officers and at-large directors
|-
|}

===Board History===
Document containing history of MakeICT Board Members: [https://docs.google.com/spreadsheets/d/1gZEUbq4uhXCztb0pJpDbcsBgloMOW32eDCeRl9cIQqM/ Link to History Page]

Contact Information

2026-01-07T22:45:11Z

Andyoutside: /* Area Leads */ removing rayna

[[Category:Board]]
[[Category:Committees]]
[[Category:Committee Leads]]
[[Category:Area Leads]]
==Policy==

Any active member of MakeICT may have their email forwarded from a makeict.org email address to an email address of their choice. In addition most modern email providers (such as [https://support.google.com/mail/answer/22377?hl=en gmail]) allow users to set their "from" or "reply-to" email address to a confirmed address of their choice.

All executive committee members are encouraged to use their makeict.org emails for all correspondence related to MakeICT. To set up email forwarding, email a request to [mailto:IT@makeict.org. IT@makeict.org.]

==Leadership Contacts==
===2025-2026 Board of Directors===
{| class="wikitable"
!Title
!Individual Email
!Forwards to
!Preferred Email
|-
|President
|[mailto:president@makeict.org president@makeict.org]
|Andy Tannahill
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Vice President
|[mailto:vicepresident@makeict.org vicepresident@makeict.org]
|Stephan Reckers
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Secretary
|[mailto:secretary@makeict.org secretary@makeict.org]
|Vacant
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Treasurer
|[mailto:treasurer@makeict.org treasurer@makeict.org]
|Aaron Grindstaff
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Director At Large
|
|Vacant
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Director At Large
|
|Vacant
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Director At Large
|[mailto:dean.day@makeict.org Dean.Day@makeict.org]
|Dean Day
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Director At Large
|[mailto:cooper.cummings@makeict.org Cooper.Cummings@makeict.org]
|Cooper Cummings
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Immediate Past President
|[mailto:Gretchen.Koch@makeict.org Gretchen.Koch@makeict.org]
|Gretchen Koch
|[mailto:directors@makeict.org directors@makeict.org]

|}

===Committee Leads===
MakeICT Committee leads are appointed by the board of directors as needed, with an on-purpose review every September.

{| class="wikitable"
!Committee
!Committee Email
!Lead
|-
|-
|'''[[Classroom Committee]]'''
*Schedules classes and rentals for events
|[Mailto:classroom.management@makeict.org%7Cclassroom.management@makeict.org classroom.management@makeict.org]
|[[User:LaDeana Dockery|LaDeana Dockery]] [mailto:ladeana.dockery@makeict.org ladeana.dockery@makeict.org]
|-
|'''[[Communications Committee]]'''
*Gather stories about our coolest tools, events, programs and makers
*Distribute needed information to our members
*Make sure we are represented across social media platforms
*Create signs, flyers, and brochures for marketing
*Lead efforts to keep our wiki up to date
|[Mailto:Communications@makeict.org%7CCommunications@makeict.org communications@makeict.org]
[Mailto:socialmedia@makeict.org%7Csocialmedia@makeict.org socialmedia@makeict.org]
|VACANT
|-
|'''[[Events Committee]]'''
*planning, setup, and managing of events relevant to MakeICT
*Indoor Events include: 5th Monday, Seasonal Parties, Vendor Events
*Outdoor Events include Ren Faire, ComicCon, Makerfaire
|[mailto:Events@makeict.org events@makeict.org]
|VACANT
|-
|'''[[Finance Committee]]'''
*Treasurer assistance & oversight
*Budget creation
*Finance and audit procedures
|[Mailto:treasurer@makeict.org%7Ctreasurer@makeict.org treasurer@makeict.org]
|Aaron Grindstaff
|-
|'''[[Fundraising Committee]]'''
*Pursue grant and fundraising opportunities

*Work with communications to make sure donation opportunities are well-publicized
*Recognize donors
|[Mailto:fundraising@makeict.org%7Cfundraising@makeict.org fundraising@makeict.org]
|Aaron Grindstaff
|-
|'''[[IT Committee]]'''
*Manage computers owned by MakeICT
*Maintain the network at our makerspace
*Update tools and applications needed for our website
|[Mailto:it@makeict.org%7Cit@makeict.org it@makeict.org]
|Steve Saner
|-
|'''[[Membership & Community]]'''
*Improve processes for getting new members on board
*Host parties, game nights, potluck meals, and general events that help humans bond
*Give mini-tours of the makerspace
*Assist with Maker Monday
*Check people in for classes
*Review scholarship applications
*Set scholarship guidelines
|[Mailto:membership@makeict.org%7Cmembership@makeict.org membership@makeict.org]
|VACANT
|-
|-
|'''[[Security Committee]]'''
*Manage access to the makerspace
*Address safety concerns
|[Mailto:Security@makeict.org%7Csecurity@makeict.org security@makeict.org]
|Bill Oden
|-
|'''[[Inventory Committee]]'''
*Aid area leads and other committees to keep current inventory up to date

*Create and maintain policies in regards to equipment use and procurement
*Maintain MakeICT's inventory database
|[Mailto:inventory@makeict.org%7CInventory@makeict.org inventory@makeict.org]
|James Lancaster
|-

|}

===[[Area Leads]]===

The Makerspace Area Leads and Co-Leads are appointed by the MakeICT board of directors each year in September. They are each responsible for some specific square footage of the makerspace. Area Leads can appoint their own area lead assistants. All of the area leads meet monthly to discuss makerspace issues and ideas.

{| class="wikitable"
!Area
!Area Contact Email
!Lead or Co-Leads
!Assistant(s)
|-
|[[Ceramics]]
|[mailto:ceramics@makeict.org ceramics@makeict.org]
|Tony Reid
|Russell Owens
|-
|[[Electronics and Rapid Prototyping|Electronics]]
|[mailto:electronics@makeict.org electronics@makeict.org]
|Kim Kirwan
|
|-
|[[FabLab Area|Fab Lab]]
|[mailto:fablab@makeict.org fablab@makeict.org]
|Andy T
|-
|[[Facilities Committee|Facilities]]
|[mailto:facilities@makeict.org facilities@makeict.org]
|JaiPal Chauhan
|
|-
|[[Gallery]]
|
|Dean Day
|
|-
|[[Garden Committee|Garden]]
|
|Piper Thomas
|Tessa Garlough-Jones
|-
|[[Jewelry Area|Jewelry]]
|[mailto:jewelry@makeict.org jewelry@makeict.org]
|Ted McMullen
|
|-
|[[Lounge / Breakroom]]
|
|Matthew Cleary
|
|-
|[[Metalshop Area|Metal Shop]]
|[mailto:metalshop@makeict.org metalshop@makeict.org]
|John Cummings
|Rustin Atkeisson, John Miranda, Jimmy Tennant
|-
|[[Screenprinting]]
|[mailto:printmaking@makeict.org printmaking@makeict.org]
|[[User:Doug Wilson|Doug Wilson]] doug.wilson@makeict.org
|
|-
|[[Stained Glass Area|Stained Glass]]
|[mailto:stainedglass@makeict.org stainedglass@makeict.org]
|Timothy York
|
|-
|[[Textiles Area|Textiles]]
|[mailto:textiles@makeict.org textiles@makeict.org]
|June Huie
|
|-
|[[Visual Arts Committee|Visual Arts]]
|
|Timothy York
|Kristopher Paxton
|-
|[[Woodshop Area|Wood Shop]]
|[mailto:woodshop@makeict.org woodshop@makeict.org]
|Dave Hanson
|
|-
|[[Welcome Area]]
|
|Gretchen Koch
gretchen.koch@makeict.org
|
|}

===Other Contacts===
{| class="wikitable"
!Title
!Email
!Forwards to
|-
|Director of Operations
|[mailto:operations@makeict.org operations@makeict.org]
|Director of Operations (Currently vacant)
|-
|Information Technology team
|[mailto:IT@makeict.org IT@makeict.org]
|[[IT Committee]]
|-
|Area Leads
|[mailto:leads@makeict.org leads@makeict.org]
|All area leads
|-
|Board of Directors
|[mailto:directors@makeict.org directors@makeict.org]
|Officers and at-large directors
|-
|}

===Board History===
Document containing history of MakeICT Board Members: [https://docs.google.com/spreadsheets/d/1gZEUbq4uhXCztb0pJpDbcsBgloMOW32eDCeRl9cIQqM/ Link to History Page]

Contact Information

2026-01-05T16:32:10Z

Andyoutside: Update for vacant positions

[[Category:Board]]
[[Category:Committees]]
[[Category:Committee Leads]]
[[Category:Area Leads]]
==Policy==

Any active member of MakeICT may have their email forwarded from a makeict.org email address to an email address of their choice. In addition most modern email providers (such as [https://support.google.com/mail/answer/22377?hl=en gmail]) allow users to set their "from" or "reply-to" email address to a confirmed address of their choice.

All executive committee members are encouraged to use their makeict.org emails for all correspondence related to MakeICT. To set up email forwarding, email a request to [mailto:IT@makeict.org. IT@makeict.org.]

==Leadership Contacts==
===2025-2026 Board of Directors===
{| class="wikitable"
!Title
!Individual Email
!Forwards to
!Preferred Email
|-
|President
|[mailto:president@makeict.org president@makeict.org]
|Andy Tannahill
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Vice President
|[mailto:vicepresident@makeict.org vicepresident@makeict.org]
|Stephan Reckers
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Secretary
|[mailto:secretary@makeict.org secretary@makeict.org]
|Vacant
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Treasurer
|[mailto:treasurer@makeict.org treasurer@makeict.org]
|Aaron Grindstaff
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Director At Large
|
|Vacant
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Director At Large
|
|Vacant
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Director At Large
|[mailto:dean.day@makeict.org Dean.Day@makeict.org]
|Dean Day
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Director At Large
|[mailto:cooper.cummings@makeict.org Cooper.Cummings@makeict.org]
|Cooper Cummings
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Immediate Past President
|[mailto:Gretchen.Koch@makeict.org Gretchen.Koch@makeict.org]
|Gretchen Koch
|[mailto:directors@makeict.org directors@makeict.org]

|}

===Committee Leads===
MakeICT Committee leads are appointed by the board of directors as needed, with an on-purpose review every September.

{| class="wikitable"
!Committee
!Committee Email
!Lead
|-
|-
|'''[[Classroom Committee]]'''
*Schedules classes and rentals for events
|[Mailto:classroom.management@makeict.org%7Cclassroom.management@makeict.org classroom.management@makeict.org]
|[[User:LaDeana Dockery|LaDeana Dockery]] [mailto:ladeana.dockery@makeict.org ladeana.dockery@makeict.org]
|-
|'''[[Communications Committee]]'''
*Gather stories about our coolest tools, events, programs and makers
*Distribute needed information to our members
*Make sure we are represented across social media platforms
*Create signs, flyers, and brochures for marketing
*Lead efforts to keep our wiki up to date
|[Mailto:Communications@makeict.org%7CCommunications@makeict.org communications@makeict.org]
[Mailto:socialmedia@makeict.org%7Csocialmedia@makeict.org socialmedia@makeict.org]
|VACANT
|-
|'''[[Events Committee]]'''
*planning, setup, and managing of events relevant to MakeICT
*Indoor Events include: 5th Monday, Seasonal Parties, Vendor Events
*Outdoor Events include Ren Faire, ComicCon, Makerfaire
|[mailto:Events@makeict.org events@makeict.org]
|VACANT
|-
|'''[[Finance Committee]]'''
*Treasurer assistance & oversight
*Budget creation
*Finance and audit procedures
|[Mailto:treasurer@makeict.org%7Ctreasurer@makeict.org treasurer@makeict.org]
|Aaron Grindstaff
|-
|'''[[Fundraising Committee]]'''
*Pursue grant and fundraising opportunities

*Work with communications to make sure donation opportunities are well-publicized
*Recognize donors
|[Mailto:fundraising@makeict.org%7Cfundraising@makeict.org fundraising@makeict.org]
|Aaron Grindstaff
|-
|'''[[IT Committee]]'''
*Manage computers owned by MakeICT
*Maintain the network at our makerspace
*Update tools and applications needed for our website
|[Mailto:it@makeict.org%7Cit@makeict.org it@makeict.org]
|Steve Saner
|-
|'''[[Membership & Community]]'''
*Improve processes for getting new members on board
*Host parties, game nights, potluck meals, and general events that help humans bond
*Give mini-tours of the makerspace
*Assist with Maker Monday
*Check people in for classes
*Review scholarship applications
*Set scholarship guidelines
|[Mailto:membership@makeict.org%7Cmembership@makeict.org membership@makeict.org]
|VACANT
|-
|-
|'''[[Security Committee]]'''
*Manage access to the makerspace
*Address safety concerns
|[Mailto:Security@makeict.org%7Csecurity@makeict.org security@makeict.org]
|Bill Oden
|-
|'''[[Inventory Committee]]'''
*Aid area leads and other committees to keep current inventory up to date

*Create and maintain policies in regards to equipment use and procurement
*Maintain MakeICT's inventory database
|[Mailto:inventory@makeict.org%7CInventory@makeict.org inventory@makeict.org]
|James Lancaster
|-

|}

===[[Area Leads]]===

The Makerspace Area Leads and Co-Leads are appointed by the MakeICT board of directors each year in September. They are each responsible for some specific square footage of the makerspace. Area Leads can appoint their own area lead assistants. All of the area leads meet monthly to discuss makerspace issues and ideas.

{| class="wikitable"
!Area
!Area Contact Email
!Lead or Co-Leads
!Assistant(s)
|-
|[[Ceramics]]
|[mailto:ceramics@makeict.org ceramics@makeict.org]
|Tony Reid
|Russell Owens
|-
|[[Electronics and Rapid Prototyping|Electronics]]
|[mailto:electronics@makeict.org electronics@makeict.org]
|Kim Kirwan
|
|-
|[[FabLab Area|Fab Lab]]
|[mailto:fablab@makeict.org fablab@makeict.org]
|Andy T
|-
|[[Facilities Committee|Facilities]]
|[mailto:facilities@makeict.org facilities@makeict.org]
|JaiPal Chauhan
|
|-
|[[Gallery]]
|
|Dean Day
|
|-
|[[Garden Committee|Garden]]
|
|Piper Thomas
|Tessa Garlough-Jones
|-
|[[Jewelry Area|Jewelry]]
|[mailto:jewelry@makeict.org jewelry@makeict.org]
|Ted McMullen
|
|-
|[[Lounge / Breakroom]]
|
|Matthew Cleary
|
|-
|[[Metalshop Area|Metal Shop]]
|[mailto:metalshop@makeict.org metalshop@makeict.org]
|John Cummings
|Rustin Atkeisson, John Miranda, Jimmy Tennant
|-
|[[Screenprinting]]
|[mailto:printmaking@makeict.org printmaking@makeict.org]
|[[User:Doug Wilson|Doug Wilson]] doug.wilson@makeict.org
|
|-
|[[Stained Glass Area|Stained Glass]]
|[mailto:stainedglass@makeict.org stainedglass@makeict.org]
|Timothy York
|
|-
|[[Textiles Area|Textiles]]
|[mailto:textiles@makeict.org textiles@makeict.org]
|June Huie

Rayna Fisher
|
|-
|[[Visual Arts Committee|Visual Arts]]
|
|Timothy York
|Kristopher Paxton
|-
|[[Woodshop Area|Wood Shop]]
|[mailto:woodshop@makeict.org woodshop@makeict.org]
|Dave Hanson
|
|-
|[[Welcome Area]]
|
|Gretchen Koch
gretchen.koch@makeict.org
|
|}

===Other Contacts===
{| class="wikitable"
!Title
!Email
!Forwards to
|-
|Director of Operations
|[mailto:operations@makeict.org operations@makeict.org]
|Director of Operations (Currently vacant)
|-
|Information Technology team
|[mailto:IT@makeict.org IT@makeict.org]
|[[IT Committee]]
|-
|Area Leads
|[mailto:leads@makeict.org leads@makeict.org]
|All area leads
|-
|Board of Directors
|[mailto:directors@makeict.org directors@makeict.org]
|Officers and at-large directors
|-
|}

===Board History===
Document containing history of MakeICT Board Members: [https://docs.google.com/spreadsheets/d/1gZEUbq4uhXCztb0pJpDbcsBgloMOW32eDCeRl9cIQqM/ Link to History Page]

Contact Information

2025-07-03T18:32:45Z

Andyoutside: /* 2025-2026 Board of Directors */ Update officers

[[Category:Board]]
[[Category:Committees]]
[[Category:Committee Leads]]
[[Category:Area Leads]]
==Policy==

Any active member of MakeICT may have their email forwarded from a makeict.org email address to an email address of their choice. In addition most modern email providers (such as [https://support.google.com/mail/answer/22377?hl=en gmail]) allow users to set their "from" or "reply-to" email address to a confirmed address of their choice.

All executive committee members are encouraged to use their makeict.org emails for all correspondence related to MakeICT. To set up email forwarding, email a request to [mailto:IT@makeict.org. IT@makeict.org.]

==Leadership Contacts==
===2025-2026 Board of Directors===
{| class="wikitable"
!Title
!Individual Email
!Forwards to
!Preferred Email
|-
|President
|[mailto:president@makeict.org president@makeict.org]
|Preston Warden
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Vice President
|[mailto:vicepresident@makeict.org vicepresident@makeict.org]
|Andy Tannahill
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Secretary
|[mailto:secretary@makeict.org secretary@makeict.org]
|Beth Shook
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Treasurer
|[mailto:treasurer@makeict.org treasurer@makeict.org]
|Aaron Grindstaff
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Director At Large
|[mailto:george.baldridge@makeict.org George.Baldridge@makeict.org]
|George Baldridge
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Director At Large
|[mailto:stephan.reckers@makeict.org Stephan.Reckers@makeict.org]
|Stephan Reckers
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Director At Large
|[mailto:dean.day@makeict.org Dean.Day@makeict.org]
|Dean Day
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Director At Large
|[mailto:cooper.cummings@makeict.org Cooper.Cummings@makeict.org]
|Cooper Cummings
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Immediate Past President
|[mailto:Gretchen.Koch@makeict.org Gretchen.Koch@makeict.org]
|Gretchen Koch
|[mailto:directors@makeict.org directors@makeict.org]

|}

===Committee Leads===
MakeICT Committee leads are appointed by the board of directors as needed, with an on-purpose review every September.

{| class="wikitable"
!Committee
!Committee Email
!Lead
|-
|-
|'''[[Classroom Committee]]'''
*Schedules classes and rentals for events
|[Mailto:classroom.management@makeict.org%7Cclassroom.management@makeict.org classroom.management@makeict.org]
|[[User:LaDeana Dockery|LaDeana Dockery]] [mailto:ladeana.dockery@makeict.org ladeana.dockery@makeict.org]
|-
|'''[[Communications Committee]]'''
*Gather stories about our coolest tools, events, programs and makers
*Distribute needed information to our members
*Make sure we are represented across social media platforms
*Create signs, flyers, and brochures for marketing
*Lead efforts to keep our wiki up to date
|[Mailto:Communications@makeict.org%7CCommunications@makeict.org communications@makeict.org]
[Mailto:socialmedia@makeict.org%7Csocialmedia@makeict.org socialmedia@makeict.org]
|VACANT
|-
|'''[[Events Committee]]'''
*planning, setup, and managing of events relevant to MakeICT
*Indoor Events include: 5th Monday, Seasonal Parties, Vendor Events
*Outdoor Events include Ren Faire, ComicCon, Makerfaire
|[mailto:Events@makeict.org events@makeict.org]
|VACANT
|-
|'''[[Finance Committee]]'''
*Treasurer assistance & oversight
*Budget creation
*Finance and audit procedures
|[Mailto:treasurer@makeict.org%7Ctreasurer@makeict.org treasurer@makeict.org]
|Aaron Grindstaff
|-
|'''[[Fundraising Committee]]'''
*Pursue grant and fundraising opportunities

*Work with communications to make sure donation opportunities are well-publicized
*Recognize donors
|[Mailto:fundraising@makeict.org%7Cfundraising@makeict.org fundraising@makeict.org]
|Aaron Grindstaff
|-
|'''[[IT Committee]]'''
*Manage computers owned by MakeICT
*Maintain the network at our makerspace
*Update tools and applications needed for our website
|[Mailto:it@makeict.org%7Cit@makeict.org it@makeict.org]
|Steve Saner
|-
|'''[[Membership & Community]]'''
*Improve processes for getting new members on board
*Host parties, game nights, potluck meals, and general events that help humans bond
*Give mini-tours of the makerspace
*Assist with Maker Monday
*Check people in for classes
*Review scholarship applications
*Set scholarship guidelines
|[Mailto:membership@makeict.org%7Cmembership@makeict.org membership@makeict.org]
|Matthew Cleary
|-
|-
|'''[[Security Committee]]'''
*Manage access to the makerspace
*Address safety concerns
|[Mailto:Security@makeict.org%7Csecurity@makeict.org security@makeict.org]
|Bill Oden
|-
|'''[[Inventory Committee]]'''
*Aid area leads and other committees to keep current inventory up to date

*Create and maintain policies in regards to equipment use and procurement
*Maintain MakeICT's inventory database
|[Mailto:inventory@makeict.org%7CInventory@makeict.org inventory@makeict.org]
|James Lancaster
|-

|}

===[[Area Leads]]===

The Makerspace Area Leads and Co-Leads are appointed by the MakeICT board of directors each year in September. They are each responsible for some specific square footage of the makerspace. Area Leads can appoint their own area lead assistants. All of the area leads meet monthly to discuss makerspace issues and ideas.

{| class="wikitable"
!Area
!Area Contact Email
!Lead or Co-Leads
!Assistant(s)
|-
|[[Ceramics]]
|[mailto:ceramics@makeict.org ceramics@makeict.org]
|Tony Reid
|Russell Owens
|-
|[[Electronics and Rapid Prototyping|Electronics]]
|[mailto:electronics@makeict.org electronics@makeict.org]
|Kim Kirwan
|
|-
|[[FabLab Area|Fab Lab]]
|[mailto:fablab@makeict.org fablab@makeict.org]
|Andy T
|-
|[[Facilities Committee|Facilities]]
|[mailto:facilities@makeict.org facilities@makeict.org]
|JaiPal Chauhan
|
|-
|[[Gallery]]
|
|Dean Day
|
|-
|[[Garden Committee|Garden]]
|
|Piper Thomas
|Tessa Garlough-Jones
|-
|[[Jewelry Area|Jewelry]]
|[mailto:jewelry@makeict.org jewelry@makeict.org]
|Ted McMullen
|
|-
|[[Lounge / Breakroom]]
|
|Matthew Cleary
|
|-
|[[Metalshop Area|Metal Shop]]
|[mailto:metalshop@makeict.org metalshop@makeict.org]
|
|
|-
|[[Screenprinting]]
|[mailto:printmaking@makeict.org printmaking@makeict.org]
|[[User:Doug Wilson|Doug Wilson]] doug.wilson@makeict.org
|
|-
|[[Stained Glass Area|Stained Glass]]
|[mailto:stainedglass@makeict.org stainedglass@makeict.org]
|Timothy York
|
|-
|[[Textiles Area|Textiles]]
|[mailto:textiles@makeict.org textiles@makeict.org]
|June Huie

Rayna Fisher
|
|-
|[[Visual Arts Committee|Visual Arts]]
|
|Timothy York
|Kristopher Paxton
|-
|[[Woodshop Area|Wood Shop]]
|[mailto:woodshop@makeict.org woodshop@makeict.org]
|Dave Hanson
|
|-
|[[Welcome Area]]
|
|Gretchen Koch
gretchen.koch@makeict.org
|
|}

===Other Contacts===
{| class="wikitable"
!Title
!Email
!Forwards to
|-
|Director of Operations
|[mailto:operations@makeict.org operations@makeict.org]
|Director of Operations (Currently vacant)
|-
|Information Technology team
|[mailto:IT@makeict.org IT@makeict.org]
|[[IT Committee]]
|-
|Area Leads
|[mailto:leads@makeict.org leads@makeict.org]
|All area leads
|-
|Board of Directors
|[mailto:directors@makeict.org directors@makeict.org]
|Officers and at-large directors
|-
|}

===Board History===
Document containing history of MakeICT Board Members: [https://docs.google.com/spreadsheets/d/1gZEUbq4uhXCztb0pJpDbcsBgloMOW32eDCeRl9cIQqM/ Link to History Page]

Contact Information

2025-07-03T18:31:18Z

Andyoutside: /* Leadership Contacts */ Updated for new board members

[[Category:Board]]
[[Category:Committees]]
[[Category:Committee Leads]]
[[Category:Area Leads]]
==Policy==

Any active member of MakeICT may have their email forwarded from a makeict.org email address to an email address of their choice. In addition most modern email providers (such as [https://support.google.com/mail/answer/22377?hl=en gmail]) allow users to set their "from" or "reply-to" email address to a confirmed address of their choice.

All executive committee members are encouraged to use their makeict.org emails for all correspondence related to MakeICT. To set up email forwarding, email a request to [mailto:IT@makeict.org. IT@makeict.org.]

==Leadership Contacts==
===2025-2026 Board of Directors===
{| class="wikitable"
!Title
!Individual Email
!Forwards to
!Preferred Email
|-
|President
|[mailto:president@makeict.org president@makeict.org]
|Gretchen Koch
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Vice President
|[mailto:vicepresident@makeict.org vicepresident@makeict.org]
|Dean Day
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Secretary
|[mailto:secretary@makeict.org secretary@makeict.org]
|Paul Shackelford
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Treasurer
|[mailto:treasurer@makeict.org treasurer@makeict.org]
|Aaron Grindstaff
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Director At Large
|[mailto:george.baldridge@makeict.org George.Baldridge@makeict.org]
|George Baldridge
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Director At Large
|[mailto:stephan.reckers@makeict.org Stephan.Reckers@makeict.org]
|Stephan Reckers
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Director At Large
|[mailto:dean.day@makeict.org Dean.Day@makeict.org]
|Dean Day
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Director At Large
|[mailto:cooper.cummings@makeict.org Cooper.Cummings@makeict.org]
|Cooper Cummings
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Immediate Past President
|[mailto:Gretchen.Koch@makeict.org Gretchen.Koch@makeict.org]
|Gretchen Koch
|[mailto:directors@makeict.org directors@makeict.org]

|}

===Committee Leads===
MakeICT Committee leads are appointed by the board of directors as needed, with an on-purpose review every September.

{| class="wikitable"
!Committee
!Committee Email
!Lead
|-
|-
|'''[[Classroom Committee]]'''
*Schedules classes and rentals for events
|[Mailto:classroom.management@makeict.org%7Cclassroom.management@makeict.org classroom.management@makeict.org]
|[[User:LaDeana Dockery|LaDeana Dockery]] [mailto:ladeana.dockery@makeict.org ladeana.dockery@makeict.org]
|-
|'''[[Communications Committee]]'''
*Gather stories about our coolest tools, events, programs and makers
*Distribute needed information to our members
*Make sure we are represented across social media platforms
*Create signs, flyers, and brochures for marketing
*Lead efforts to keep our wiki up to date
|[Mailto:Communications@makeict.org%7CCommunications@makeict.org communications@makeict.org]
[Mailto:socialmedia@makeict.org%7Csocialmedia@makeict.org socialmedia@makeict.org]
|VACANT
|-
|'''[[Events Committee]]'''
*planning, setup, and managing of events relevant to MakeICT
*Indoor Events include: 5th Monday, Seasonal Parties, Vendor Events
*Outdoor Events include Ren Faire, ComicCon, Makerfaire
|[mailto:Events@makeict.org events@makeict.org]
|VACANT
|-
|'''[[Finance Committee]]'''
*Treasurer assistance & oversight
*Budget creation
*Finance and audit procedures
|[Mailto:treasurer@makeict.org%7Ctreasurer@makeict.org treasurer@makeict.org]
|Aaron Grindstaff
|-
|'''[[Fundraising Committee]]'''
*Pursue grant and fundraising opportunities

*Work with communications to make sure donation opportunities are well-publicized
*Recognize donors
|[Mailto:fundraising@makeict.org%7Cfundraising@makeict.org fundraising@makeict.org]
|Aaron Grindstaff
|-
|'''[[IT Committee]]'''
*Manage computers owned by MakeICT
*Maintain the network at our makerspace
*Update tools and applications needed for our website
|[Mailto:it@makeict.org%7Cit@makeict.org it@makeict.org]
|Steve Saner
|-
|'''[[Membership & Community]]'''
*Improve processes for getting new members on board
*Host parties, game nights, potluck meals, and general events that help humans bond
*Give mini-tours of the makerspace
*Assist with Maker Monday
*Check people in for classes
*Review scholarship applications
*Set scholarship guidelines
|[Mailto:membership@makeict.org%7Cmembership@makeict.org membership@makeict.org]
|Matthew Cleary
|-
|-
|'''[[Security Committee]]'''
*Manage access to the makerspace
*Address safety concerns
|[Mailto:Security@makeict.org%7Csecurity@makeict.org security@makeict.org]
|Bill Oden
|-
|'''[[Inventory Committee]]'''
*Aid area leads and other committees to keep current inventory up to date

*Create and maintain policies in regards to equipment use and procurement
*Maintain MakeICT's inventory database
|[Mailto:inventory@makeict.org%7CInventory@makeict.org inventory@makeict.org]
|James Lancaster
|-

|}

===[[Area Leads]]===

The Makerspace Area Leads and Co-Leads are appointed by the MakeICT board of directors each year in September. They are each responsible for some specific square footage of the makerspace. Area Leads can appoint their own area lead assistants. All of the area leads meet monthly to discuss makerspace issues and ideas.

{| class="wikitable"
!Area
!Area Contact Email
!Lead or Co-Leads
!Assistant(s)
|-
|[[Ceramics]]
|[mailto:ceramics@makeict.org ceramics@makeict.org]
|Tony Reid
|Russell Owens
|-
|[[Electronics and Rapid Prototyping|Electronics]]
|[mailto:electronics@makeict.org electronics@makeict.org]
|Kim Kirwan
|
|-
|[[FabLab Area|Fab Lab]]
|[mailto:fablab@makeict.org fablab@makeict.org]
|Andy T
|-
|[[Facilities Committee|Facilities]]
|[mailto:facilities@makeict.org facilities@makeict.org]
|JaiPal Chauhan
|
|-
|[[Gallery]]
|
|Dean Day
|
|-
|[[Garden Committee|Garden]]
|
|Piper Thomas
|Tessa Garlough-Jones
|-
|[[Jewelry Area|Jewelry]]
|[mailto:jewelry@makeict.org jewelry@makeict.org]
|Ted McMullen
|
|-
|[[Lounge / Breakroom]]
|
|Matthew Cleary
|
|-
|[[Metalshop Area|Metal Shop]]
|[mailto:metalshop@makeict.org metalshop@makeict.org]
|
|
|-
|[[Screenprinting]]
|[mailto:printmaking@makeict.org printmaking@makeict.org]
|[[User:Doug Wilson|Doug Wilson]] doug.wilson@makeict.org
|
|-
|[[Stained Glass Area|Stained Glass]]
|[mailto:stainedglass@makeict.org stainedglass@makeict.org]
|Timothy York
|
|-
|[[Textiles Area|Textiles]]
|[mailto:textiles@makeict.org textiles@makeict.org]
|June Huie

Rayna Fisher
|
|-
|[[Visual Arts Committee|Visual Arts]]
|
|Timothy York
|Kristopher Paxton
|-
|[[Woodshop Area|Wood Shop]]
|[mailto:woodshop@makeict.org woodshop@makeict.org]
|Dave Hanson
|
|-
|[[Welcome Area]]
|
|Gretchen Koch
gretchen.koch@makeict.org
|
|}

===Other Contacts===
{| class="wikitable"
!Title
!Email
!Forwards to
|-
|Director of Operations
|[mailto:operations@makeict.org operations@makeict.org]
|Director of Operations (Currently vacant)
|-
|Information Technology team
|[mailto:IT@makeict.org IT@makeict.org]
|[[IT Committee]]
|-
|Area Leads
|[mailto:leads@makeict.org leads@makeict.org]
|All area leads
|-
|Board of Directors
|[mailto:directors@makeict.org directors@makeict.org]
|Officers and at-large directors
|-
|}

===Board History===
Document containing history of MakeICT Board Members: [https://docs.google.com/spreadsheets/d/1gZEUbq4uhXCztb0pJpDbcsBgloMOW32eDCeRl9cIQqM/ Link to History Page]

2025 Board Nominations

2025-07-03T18:27:58Z

Andyoutside: bolded those elected

Note: Elected candidates will be shown in '''bold''' after the election

=='''Nominations'''==
This is a list of the candidates who have accepted nomination and will be part of the upcoming election at the Annual Meeting on June 22nd.

If you wish to learn more about the candidate, or ask them questions, visit the forum. The link next to their name will take you to the discussion thread for each.
===President===

*'''Preston Warden''' [[https://talk.makeict.org/t/2025-board-election-candidate-profile-president-treasurer-preston-warden/30557 Candidate Profile]]

*

*

===Vice-President===

*'''Andy Tannahill''' [[https://talk.makeict.org/t/2025-board-election-candidate-profile-vice-president-and-at-large-andy-t/30798/2 Candidate Profile]]

*

===Secretary===

*'''Beth Shook''' [Candidate Profile]

===Treasurer===

*'''Aaron Grindstaff''' [[https://talk.makeict.org/t/2025-board-election-candidate-profile-treasurer-at-large-aaron-grindstaff/30560 Candidate Profile]]
*Preston Warden [[https://talk.makeict.org/t/2025-board-election-candidate-profile-president-treasurer-preston-warden/30557 Candidate Profile]]

*

*

===At-Large===

*Aaron Grindstaff [[https://talk.makeict.org/t/2025-board-election-candidate-profile-treasurer-at-large-aaron-grindstaff/30560 Candidate Profile]]
*'''George Baldridge''' [[https://talk.makeict.org/t/2025-board-election-candidate-profile-at-large-george-baldridge/30562 Candidate Profile]]
*Andy Tannahill [[https://talk.makeict.org/t/2025-board-election-candidate-profile-vice-president-and-at-large-andy-t/30798/2 Candidate Profile]]
*'''Stephan Reckers''' [[https://talk.makeict.org/t/2025-board-election-candidate-profile-at-large-stephan-reckers/30799/4 Candidate Profile]]
*'''Dean Day''' [[https://talk.makeict.org/t/2025-board-election-candidate-profile-vice-president-dean-day/30559 Candidate Profile]]

*'''Cooper Cummings''' [Candidate Profile]

Board Nominations and Election Results

2025-06-28T17:39:25Z

Andyoutside: add 2025

[[2025 Board Nominations]] and Election Results

[[2024 Board Nominations]] and Election Results

[[2023 Board Nominations and Special Election Results]]

[[2023 Board Nominations and Election Results]]

[[2022 Board Nominations and Election Results]]

[[2021 Board Nominations and Election Results]]

[[2020 Board Nominations]] and Election Results

[[2019 Board Nominations]] and Election Results

[[2018 Elections - Ballot]] and Election Results

[[2017 Elections - Ballot]] and Election Results

[[2016 Board Nominations and Election Results]]

[[2015 Board Nominations and Election Results]]

[[2014 Board Election Results]]

Leads Meeting

2025-06-14T15:59:23Z

Andyoutside: /* Area Colors */

==Area Colors==

Main (Inventory Tag color)

*Electronics: Purple (Pink)
*Metal shop: Black (Blue)
*Woodshop: Day Glow Green (Green)
*Ceramics: Yellow (Yellow)
*Garden: Day glow orange (Orange)
*Print Shop: Dark Blue (Blue)
*Textiles: Neon Pink (Pink)
*Visual Arts: Turquoise (Blue)
*Jewelry: Gold (Yellow)
*Gallery: White (they’re already dirty grey) (White)
*Classroom: Red (Red 3, Green 2, Blue 4)
*Stained Glass: Maroon (Orange)
*Fablab: Reflective (Red)
*Lounge: (Yellow)
*Facilities, Security, IT: (White)

==Meeting Notes==
[https://docs.google.com/document/d/18xOqNjHEaeoozPU0BFTgkZQ07_QUG_ZV-ff8n1iULis/edit?usp=drive_link April 2024]

3D Printing

2025-04-27T19:33:59Z

Andyoutside: /* Resources */ Add Resin

[[Category:FabLab Equipment]]
==About==
3D printing is an additive manufacturing process that allows for the creation of real-world, tangible objects from 3D virtual models. MakeICT maintains the following 3D printers:

*[[Prusa i3 MK4]]
*[[Prusa i3 MK3|Prusa i3 MK3S+]] (x4)
*[[Ultimaker 2]]

The current print status for the Prusa printers can be viewed here: http://3dprintmonitor.makeict.org/

==Machine Access Policy==
Use of the 3D printers requires authorization from an approved peer-authorizer or attendance in a 3D printer workshop that includes authorization.

*Any member who has been authorized to use the 3D printer may peer-authorize other members
*Authorization instruction must at least include:
**Fundamental knowledge of each printer's working principles
**Proper use and control of each printer
**Software workflow
**How to change filament
**How to pay for material

==Filament Fund==
Printing with filament provided by MakeICT costs $0.04 per gram. After printing, please weigh your print using the provided scale and put the appropriate amount of money in the filament fund jar. If you have any requests for new colors/types of filaments, you can post them in the Fab Lab category on [https://talk.makeict.org our forum], or send an email to [mailto:fablab@makeict.org fablab@makeict.org].

==Prusa 3D Printers and Filament Types==
Review this guide for best practices when using different filament types with MakeICT's Prusa printers: [[MakeICT Prusa 3D Printers and Filament Types]]

==Workflow==
===Slicing===
Slicing is the process of converting an STL file to the G-Code required to run the printer.

We use PrusaSlicer to generate the G-Code for our printers. The design computer in the Fab Lab has the appropriate profiles installed, as well as all MakeICT laptops. These profiles are also available on the [[Slicer Profiles]] page on this Wiki if you want to install them on your own computer.

To generate the G-Code for a 3D printer, first select the appropriate printer in the 'Printer' dropdown in the upper right-hand side of Plater window. Then select the preset for the material you wish to use. To load your file click the 'Add' button on the left-hand side of the toolbar at the top of the 3D Editor view. You can also go to 'File' > 'Import' > 'Import STL/OBJ/AMF/3MF' or use the hotkey 'Ctrl + i'. PrusaSlicer should automatically slice the file in the background, and progress will be displayed in the lower right-hand corner of the window.

Before you send you G-Code, always check the preview by clicking the second icon in the bottom left corner of the screen. Once you've confirmed that everything looks good, hit the 'Send G-code' button near the bottom right 3D Editor view.

G-Code generated for one machine '''WILL NOT''' work properly on the others, so if you manually save the G-code, be sure that you only use it on the printer that it was originally sliced for. This info can be found in the G-code file if you forget.

===Printing===
Each printer can be run using Octoprint. More thorough instructions on this interface can be found on the [[Octoprint]] page. The username and password are 'maker'.

The printers can be reached at the following addresses while connected to the network at MakeICT:

*Prusa 1 (Prusa i3 MK3S+) [http://prusa1.makeict.org prusa1.makeict.org]
*Prusa 2 (Prusa i3 MK3S+) [http://prusa2.makeict.org prusa2.makeict.org]
*Prusa 3 (Prusa i3 MK3S+) [http://prusa3.makeict.org prusa3.makeict.org]
*Prusa 4 (Prusa i3 MK3S+) [http://prusa4.makeict.org prusa4.makeict.org]
*Prusa 5 (Prusa i3 MK4) [http://prusa5.makeict.org prusa5.makeict.org]
*Ultimaker 2 [http://ultimaker.makeict.org ultimaker.makeict.org]

To run a print: select your file and click the print button.

===Changing Filament===
The process for changing filament varies slightly between the Prusas and the rest of the printers, but all of them use the filament change menus on the LCD control panel. Wiki Page for the specific printer may have more details on the filament change process if needed.

==General Use Tips==

*'''Always''' watch the first layer of a print to make sure that it sticks to the bed properly.
**If the first layer does not adhere properly the print will fail and make a big mess, potentially damaging the machine.

*Check material before starting a print. Make sure it is the correct type, and that there is enough to complete the print.

*When your print is finished, do not immediately turn off the power; wait until the nozzle has cooled. All of our printers have actively-cooled heatsinks on their hotends, and if power is cut before the nozzle is cool the filament can melt higher up than intended and cause a jam.

*Be careful when removing prints. The glass beds are fairly durable, but can be cracked with excessive force. '''No hammers, mallets, or other bludgeoning devices are to be used for print removal!'''

*G-Code files generated for one printer should never be used on another. Re-run the slicer with the appropriate profiles for the machine that is being used

*Abrasive materials (carbon, metal, glow-in-the-dark, etc.) require hardened nozzles to print. '''DO NOT''' print any abrasives with the regular brass nozzles!
*'''NEVER''' use metal scrapers to remove prints from the Prusa printers. You will damage the print surface. Remove the spring steel sheet and bend it to detach printed objects from the surface.

==Resources==

*Slides for 3D Printing Basics Class
**https://drive.google.com/open?id=1c_LwoGg5Q9U5wuRVSqZHzLYhSFqgXUmNoGOQZj2W2N0
*Example files for 3D Printing Basics Class
**https://drive.google.com/open?id=1c1Jz6pHSVRO1V4L3aOdpQ0r1Tu-zE9J2
*Descriptions of the various G-Codes used to run the printers can be found here:
**http://reprap.org/wiki/G-code
*A list of some of the 3D design software we use at MakeICT
**[[3d_Design_Software|3D_Design_Software]]
*Print Status Page:
**http://3dprintmonitor.makeict.org/
*Resin Resources
**https://drive.google.com/drive/folders/1oOgU-v-ZWnw7U2r7rq04rDSXgmyzUw8_?usp=sharing

Logo and branding

2025-04-13T15:30:25Z

Andyoutside: Add to policies

[[File:MakeICT-wallpaper-light.png|center|600px]]
[[Category:Rules_and_policies]]
== Signature Elements and Lock-Ups ==
The MakeICT signature is a lock-up of 2 elements: the Logo and the Logotype

[[File:Lockup-vertical.png|center]]

This combination of elements is referred to as a lock-up, as it locks these elements together, in a prescribed scale and relationship to each other that prevents the independent altering of elements.

The primary signature is a centered vertical lock-up. There is a secondary horizontal lock-up of the signature that can be used when limited space requires it, and it is included in the logo files.

[[File:Lockup-horizontal.png|center]]

== Safe Zone ==

Each lock-up of the signature should have a safe zone around it, ensuring clear space between the mark and other graphic elements. With very rare exceptions, this safe zone should be observed so your identity stands out.

Note: Safe zones are built into the provided files. In the vector files, you will
see a guide delineating this area when opened with Adobe Illustrator.

[[File:safe-zones.png|center]]

== Color ==
The MakeICT visual identity uses three colors, specified below.

{| class="wikitable" style="margin: auto;"
| rowspan="3" | [[File:Logo-primary.svg]]
| <div style="width:4em; height: 4em; background: #97999b"></div>
| Pantone Cool Gray 7 (coated) #97999b R=151 G=153 B=155
|-
| <div style="width:4em; height: 4em; background: #53565a"></div>
| Pantone Cool Gray 11 (coated) #53565a R=83 G=86 B=90
|-
| <div style="width:4em; height: 4em; background: #ff4438"></div>
| Pantone Warm Red (coated) #ff4438 R=255 G=68 B=56
|}

3-color works best on white backgrounds, for print and web use. For situations where a white background isn’t possible or desired, as is the case with shirts, the logo in 1-color is a good option.

[[File:One-color-logo-examples.png|center]]

== Type ==
[[File:Callout-logotype.png|center]]

The MakeICT logotype is set in modified Vitesse Sans, making it custom and unique to MakeICT. Never try to reset, rebuild or approximate the logotype for this reason.

With rare exception, the logotype should always appear with the logo as prescribed in the lock-ups — this is the most memorable and unique form of your identity, when it includes the robot head and maker objects. But in the event that space limitations or other extreme circumstances leave you without a choice, the MakeICT logotype could be used as a standalone mark. It is included in the logo files provided, so there is no need to alter or pull from the primary and secondary logo files.

[[File:MakeICT-Logotype.svg|center]]

== Unacceptable usage ==
It is highly important for maintaining a successful brand that the MakeICT logo and its signatures be handled and displayed properly and consistently.

The following examples illustrate unacceptable uses.

[[File:unacceptable-logo.png|center]]

== Acceptable usage ==
'''Always:'''
* '''Scale the entire logo uniformly.'''
* '''Use the logo in an unaltered state, as it was furnished in the files.'''
* '''Observe the safe zone.'''
* '''Make sure the background has proper contrast with the logo.'''

'''The exception to the rules:'''

With all these rules, how are you supposed to have any fun?! Well, it’s worth pointing out that these rules are just for official MakeICT branded materials that appear in print and web, signage, etc., where it is important for the logo to be on display in a clear and consistent manner. Following the rules strengthens your brand recognition. But that doesn’t mean your members can’t have fun with it, and you can’t break the rules yourself in special circumstances. Is it an outline if you make it out of wire or neon lights? Or is it a forbidden special effect to route the logo out of a giant slab of wood or cut it out of foam or print it in 3D? That’s a stretch, to police the logo’s use in all situations, so don’t take it too far. Use your best judgment.

== Downloads ==

<gallery>
Logo-primary.svg|Primary SVG
Logo-primary.eps|Primary EPS
Logo-primary.png|Primary PNG
</gallery><gallery>
Logo-secondary.svg|Secondary SVG
Logo-secondary.eps|Secondary EPS
</gallery><gallery>
Logo-type.svg|Logotype SVG
Logo-type.eps|Logotype EPS
</gallery><gallery>
MakeICT-wallpaper-light.png|Light wallpaper
MakeICT-wallpaper-dark.png|Dark wallpaper
MakeICT-wallpaper-black.png|Black wallpaper
</gallery>

=== Printables ===
* Sheet of "Made at MakeICT" Labels: https://drive.google.com/file/d/1XgWmj_UAtePyIzZW_hd1q27aSN6SKcU4/view?usp=sharing

3d Design Software

2025-01-23T00:11:19Z

Andyoutside: add freecad

{| class="wikitable"
|-
!Name
!Website
!Description
|-

|Tinkercad
|https://www.tinkercad.com/#/
|Simple web based design program. Combine basic shapes to build more complex objects. Great for simple designs and younger users.
|-
|Blender
|https://www.blender.org/
|Powerful open source 3D modeling and rending program. Lots of capability, steep learning curve.
|-
|Sculptris
|http://pixologic.com/sculptris/
|Based on the paradigm of shaping clay, you start with a sphere and use different tools to push and pull it into the shape you want. Good for artistic modeling, not so much for precise
|-
|OpenSCAD
|http://www.openscad.org/
|Programming language based modeler. Write code to create your objects. Very flexible for creating configurable objects.
|-
|Fusion 360
|https://www.autodesk.com/products/fusion-360/free-trial
|Parametric CAD program with tons of features. Great for creating precisely dimensioned objects, mechanical devices, etc.
|-
|OnShape
|https://www.onshape.com/
|Web-based CAD program. Not as many features as Fusion 360, but covers all the important bases and is simpler to learn. Doesn't require as much computing power to run properly.
|-
|FreeCad
|https://www.freecad.org/
|Open Source parametric CAD program
|-
|}

Thingiverse https://www.thingiverse.com/

Contact Information

2024-12-23T17:16:43Z

Andyoutside: Updated for new Leads

[[Category:Board]]
[[Category:Committees]]
[[Category:Committee Leads]]
[[Category:Area Leads]]
==Policy==

Any active member of MakeICT may have their email forwarded from a makeict.org email address to an email address of their choice. In addition most modern email providers (such as [https://support.google.com/mail/answer/22377?hl=en gmail]) allow users to set their "from" or "reply-to" email address to a confirmed address of their choice.

All executive committee members are encouraged to use their makeict.org emails for all correspondence related to MakeICT. To set up email forwarding, email a request to [mailto:IT@makeict.org. IT@makeict.org.]

==Leadership Contacts==
===2024-2025 Board of Directors===
{| class="wikitable"
!Title
!Individual Email
!Forwards to
!Preferred Email
|-
|President
|[mailto:president@makeict.org president@makeict.org]
|Gretchen Koch
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Vice President
|[mailto:vicepresident@makeict.org vicepresident@makeict.org]
|Dean Day
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Secretary
|[mailto:secretary@makeict.org secretary@makeict.org]
|Paul Shackelford
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Treasurer
|[mailto:treasurer@makeict.org treasurer@makeict.org]
|Aaron Grindstaff
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Director At Large
|[mailto:matthew.cleary@makeict.org matthew.cleary@makeict.org]
|Matthew Cleary
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Director At Large
|[mailto:eric.manda@makeict.org eric.manda@makeict.org]
|Eric Manda
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Director At Large
|[mailto:aaron.norton@makeict.org aaron.norton@makeict.org]
|Aaron Norton
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Director At Large
|[mailto:serena.oden-powers@makeict.org serena.oden-powers@makeict.org]
|Serena Oden-Powers
|[mailto:directors@makeict.org directors@makeict.org]
|-
|Immediate Past President
|N/A
|Vacant
|[mailto:directors@makeict.org directors@makeict.org]

|}

===Committee Leads===
MakeICT Committee leads are appointed by the board of directors as needed, with an on-purpose review every September. They attend MakeICT board meetings to report out on their progress and ideas.

This table is in the process of being updated as of Oct 2020.

{| class="wikitable"
!Committee
!Committee Email
!Lead
|-
|-
|'''[[Classroom Committee]]'''
*Schedules classes and rentals for events
|[Mailto:classroom.management@makeict.org%7Cclassroom.management@makeict.org classroom.management@makeict.org]
|[[User:LaDeana Dockery|LaDeana Dockery]] [mailto:ladeana.dockery@makeict.org ladeana.dockery@makeict.org]
|-
|'''[[Communications Committee]]'''
*Gather stories about our coolest tools, events, programs and makers
*Distribute needed information to our members
*Make sure we are represented across social media platforms
*Create signs, flyers, and brochures for marketing
*Lead efforts to keep our wiki up to date
|[Mailto:Communications@makeict.org%7CCommunications@makeict.org communications@makeict.org]
[Mailto:socialmedia@makeict.org%7Csocialmedia@makeict.org socialmedia@makeict.org]
|Serena Oden-Powers
[mailto:Serena.oden-powers@makeict.org serena.oden-powers@makeict.org]
|-
|'''Events Committee'''
*planning, setup, and managing of events relevant to MakeICT
*Indoor Events include: 5th Monday, Seasonal Parties, Vendor Events
*Outdoor Events include Ren Faire, ComicCon, Makerfaire
|[mailto:Events@makeict.org events@makeict.org]
|VACANT
|-
|'''[[Finance Committee]]'''
*Treasurer assistance & oversight
*Budget creation
*Finance and audit procedures
|[Mailto:treasurer@makeict.org%7Ctreasurer@makeict.org treasurer@makeict.org]
|Aaron Grindstaff
|-
|'''[[Fundraising Committee]]'''
*Pursue grant and fundraising opportunities

*Work with communications to make sure donation opportunities are well-publicized
*Recognize donors
|[Mailto:fundraising@makeict.org%7Cfundraising@makeict.org fundraising@makeict.org]
|Aaron Grindstaff
|-
|'''[[IT Committee]]'''
*Manage computers owned by MakeICT
*Maintain the network at our makerspace
*Update tools and applications needed for our website
|[Mailto:it@makeict.org%7Cit@makeict.org it@makeict.org]
|Steve Saner
|-
|'''[[Membership & Community]]'''
*Improve processes for getting new members on board
*Host parties, game nights, potluck meals, and general events that help humans bond
*Give mini-tours of the makerspace
*Assist with Maker Monday
*Check people in for classes
*Review scholarship applications
*Set scholarship guidelines
|[Mailto:membership@makeict.org%7Cmembership@makeict.org membership@makeict.org]
|Matthew Cleary
|-
|-
|'''[[Security Committee]]'''
*Manage access to the makerspace
*Address safety concerns
|[Mailto:Security@makeict.org%7Csecurity@makeict.org security@makeict.org]
|Bill Oden
|-
|'''[[Inventory Committee]]'''
*Aid area leads and other committees to keep current inventory up to date

*Create and maintain policies in regards to equipment use and procurement
*Maintain MakeICT's inventory database
|[Mailto:inventory@makeict.org%7CInventory@makeict.org inventory@makeict.org]
|James Lancaster
|-

|}

===[[Area Leads]]===

The Makerspace Area Leads are appointed by the MakeICT board of directors each year. They are each responsible for some specific square footage of the makerspace. Area Leads appoint their own area lead assistants. All of the area leads meet monthly to discuss makerspace issues and ideas.

{| class="wikitable"
!Area
!Area Contact Email
!Lead
!Assistant(s)
|-
|Ceramics
|[mailto:ceramics@makeict.org ceramics@makeict.org]
|Thad Lawrence
|Russell Owens
Russell.owens@makeict.org
|-
|Electronics
|[mailto:electronics@makeict.org electronics@makeict.org]
|Kim Kirwan
|
|-
|Fab Lab
|[mailto:fablab@makeict.org fablab@makeict.org]
|Andy T
|-
|Facilities
|[mailto:facilities@makeict.org facilities@makeict.org]
|Joe Birzer
Joe.birzer@makeict.org
|
|-
|Gallery
|
|Dean Day
|
|-
|Garden
|
|Piper Thomas
|Tessa Garlough-Jones
|-
|Jewelry
|[mailto:jewelry@makeict.org jewelry@makeict.org]
|Ted McMullen
|
|-
|Lounge / Breakroom
|
|Matthew Cleary
|
|-
|Metal Shop
|[mailto:metalshop@makeict.org metalshop@makeict.org]
|
|
|-
|Screenprinting
|[mailto:printmaking@makeict.org printmaking@makeict.org]
|[[User:Doug Wilson|Doug Wilson]] doug.wilson@makeict.org
|
|-
|Stained Glass
|[mailto:stainedglass@makeict.org stainedglass@makeict.org]
|Timothy York
|
|-
|Textiles
|[mailto:textiles@makeict.org textiles@makeict.org]
|June Huie

Rayna Fisher
|
|-
|Visual Arts
|
|Kristopher Paxton

Kristopher.Paxton@makeict.org
|
|-
|Wood Shop
|[mailto:woodshop@makeict.org woodshop@makeict.org]
|
|
|-
|Welcome Area
|
|Gretchen Koch
gretchen.koch@makeict.org
|
|}

===Other Contacts===
{| class="wikitable"
!Title
!Email
!Forwards to
|-
|Director of Operations
|[mailto:operations@makeict.org operations@makeict.org]
|Director of Operations (Currently vacant)
|-
|Information Technology team
|[mailto:IT@makeict.org IT@makeict.org]
|[[IT Committee]]
|-
|Area Leads
|[mailto:leads@makeict.org leads@makeict.org]
|All area leads
|-
|Board of Directors
|[mailto:directors@makeict.org directors@makeict.org]
|Officers and at-large directors
|-
|}

===Board History===
Document containing history of MakeICT Board Members: [https://docs.google.com/spreadsheets/d/1gZEUbq4uhXCztb0pJpDbcsBgloMOW32eDCeRl9cIQqM/ Link to History Page]

Main Page

2024-09-24T21:35:22Z

Andyoutside: Updated links so they do not redirect

''MakeICT's [[wiki]] is a place where anybody can share information, thoughts, or anything helpful about any project or topic which may be of interest to MakeICT members. This wiki is open to and editable by anybody wishing to [[contribute]]. If you wonder if something could be on here then it can. If you need help editing or adding anything to the wiki contact [mailto:communications@makeict.org communications@makeict.org] to make the changes for you.''

'''MakeICT's mission:''' We innovate, learn, and build community at the intersection of art, technology, science, and culture.

==Contacts==
[[Contact Information]] - detailed contact information for our board of directors, area leads, and committee leads

==[[:Category:Areas|Areas]]==

*[[Breakroom]]
*[[Electronics and Rapid Prototyping]]
*[[FabLab Area|FabLab]]
*[[Gallery]]
*[[Garden Committee|Garden]]
*[[Metalshop Area|Metalshop]]
*[[Ceramics Area|Ceramics]]
*[[Woodshop Area|Woodshop]]
*[[Textiles Area|Textiles]]
*[[PrintMaking]]
*[[Jewelry Area|Jewelry]]
*[[Lounge]]
*[[Visual Arts Committee|Visual Arts]]
*[[Stained Glass Area|Stained Glass]]
*[[Welcome Area]]

Also see [[Leads Meeting|Leads Meeting]] for minutes from gatherings of area leads. Area colors are also there.

==Committees==

[[Committees]] are voluntary groups, formed in order to operate and maintain a new area of the Makerspace, foster growth of a community of interested persons, or accomplish certain needs, subject to the oversight of the Board of Directors. To form a committee for a new thing or area, and for responsibilities see the information in the [[Committees|committee policy]].

===Standing Committees===

*[[Security Committee]]
*[[IT Committee]]
*[[Membership Committee]]
*[[Communications|Communications Committee]]
*[[Finance Committee]]
*[[Facilities Committee]]
*[[Classroom Committee]]
**[[Events Committee]]
**[[Outreach Committee]]
*[[Fundraising Committee]]
*[[Inventory and Procurement]]

===Ad Hoc Committees===

*[[Discrimination and Harassment Policy]]

===Specialized Committees===

*None currently

===Special Interest Groups===

*[[Guitar Builders Group]]

==Instructional Resources==

*[[MakeICT Leadership Training]]
*[[MakeICT Instructor Training]]
*[[Workshops and classes]]
*[[Volunteering]] at MakeICT

==Rules & Policies==

*[[Bylaws]]
*[[Standing rules|Standing Rules]]
*[[:Category:Access_policies|Access Policies]]
*[[:Category:Rules_and_policies|All policies]]
*[[Donations|Donations (includes Cash Donation Policy)]]
*[[Trespass Warned Persons]]

==Meetings==

*[[Meetings]]
*[[Meeting Tasks]]
*[[Board Decisions]]
*Past [[Board Nominations and Election Results]]

==General MakeICT Links==

*[//www.makeict.org Official Website]
*[//talk.makeict.org Main Forum for Communication]
*[//www.facebook.com/MakeICT Facebook]
*[https://www.instagram.com/makeict/ Instagram]
*[//www.twitter.com/makeict Twitter]
*[http://www.meetup.com/MakeICT/ Meetup]
*[http://makeict.org/calendar/ Calendar]

==Getting Started Using Our Wiki==
Consult the [//meta.wikimedia.org/wiki/Help:Contents User's Guide] or [[Help]] for information on using the wiki software.

==Historical Pages==
[[Archived Pages of Interest]]

==Relevant Outside Links==
[[Curtis Middle School]]

[[Great Plains Renaissance Festival]]

[[East Mount Vernon Neighborhood Association]]

Stained Glass

2024-09-24T16:27:51Z

Andyoutside: redirect to other stained glass page

#REDIRECT[[Stained Glass Area]]

File:Light Table.jpg

2024-09-21T01:55:42Z

Andyoutside:

File:Grinder.jpg

2024-09-21T01:38:39Z

Andyoutside:

Stained Glass Area

2024-09-21T01:14:50Z

Andyoutside: Added Consumable and prices

Stained Glass Area is located in Classroom 1 along with Visual Arts.

All tools require authorization to use.

== Consumables/Price List ==
{| class="wikitable"
|+
!Unit
!Description
!Price
|-
|Square Foot
|Colored Art Glass - Sheet
|$13.71
|-
|Square Foot
|Clear Art Glass - Sheet
|$13.71
|-
|Square Foot
|Clear Practice Glass - Assorted
|Free
|-
|Square Foot
|Scrap Glass
|Donation
|-
|Foot
|Copper Foil
|$0.46
|-
|Foot
|Lead Came "H"
|$1.52
|-
|Foot
|Lead Came "U"
|$1.36
|-
|Once
|Patina
|$1.48
|-
|2 inch blob
|Polish
|$0.22
|}
Flux and solder are included in Foil and Came prices

==Tool Kits==
There are 5 Tool Kits that each contain:
{| class="wikitable"
|+
!Picture
!Name
!Uses
|-
|[[File:Glass Cutter.jpg|200px]]
|Glass Cutter
|Used to score the glass where you want to break it.
|-
|[[File:Running Pliers.jpg|200px]]
|Running Pliers
|Used to break the glass along the score line
|-
|[[File:Grozier pliers.jpg|200px]]
|Grozer Pliers
|To separate glass or chip bits of glass off
|-
|[[File:Nails and spacers.jpg|200px]]
|Nails and Spacers
|Used to hold the galls in place on the work area
|-
|[[File:Foil Roller.jpg|200px]]
|Foil Roller
|Bend over the foil and then smooth out the foil
|-
|[[File:Plastic Fids.jpg|200px]]
|Plastic Fids
|Used to flatten the foil after using the roller
|-
|[[File:Wood Fids.jpg|200px]]
|Wood Fids
|
|-
|[[File:Mallet.jpg|200px]]
|Mallet
|Put the nails into the work surface
|-
|[[File:Sharpies and writing utensils.jpg|200px]]
|Sharpies and writing utensils.
|Marking the glass
|}
 

==Other Tools==
 
{| class="wikitable"
|+
!Picture
!Name
!Use
!Count
|-
|[[File:Work surface.jpg|thumb]]
|Work Surface
|To cut glass on and solder if not using glass
|5
|-
|[[File:Foiling Machine.jpg|thumb]]
|Foiling Machine
|For long straight lines
|1
|-
|[[File:Cutting Oil.jpg|thumb]]
|Cutting Oil
|refill the glass cutters
|
|}

Stained Glass Area

2024-09-21T00:13:55Z

Andyoutside:

Stained Glass Area is located in Classroom 1 along with Visual Arts.

All tools require authorization to use.

== Tool Kits ==
There are 5 Tool Kits that each contain:
{| class="wikitable"
|+
!Picture
!Name
!Uses
|-
|[[File:Glass Cutter.jpg|200px]]
|Glass Cutter
|Used to score the glass where you want to break it.
|-
|[[File:Running Pliers.jpg|200px]]
|Running Pliers
|Used to break the glass along the score line
|-
|[[File:Grozier pliers.jpg|200px]]
|Grozer Pliers
|To separate glass or chip bits of glass off
|-
|[[File:Nails and spacers.jpg|200px]]
|Nails and Spacers
|Used to hold the galls in place on the work area
|-
|[[File:Foil Roller.jpg|200px]]
|Foil Roller
|Bend over the foil and then smooth out the foil
|-
|[[File:Plastic Fids.jpg|200px]]
|Plastic Fids
|Used to flatten the foil after using the roller
|-
|[[File:Wood Fids.jpg|200px]]
|Wood Fids
|
|-
|[[File:Mallet.jpg|200px]]
|Mallet
|Put the nails into the work surface
|-
|[[File:Sharpies and writing utensils.jpg|200px]]
|Sharpies and writing utensils.
|Marking the glass
|}
 

== Other Tools ==
 
{| class="wikitable"
|+
!Picture
!Name
!Use
!Count
|-
|[[File:Work surface.jpg|thumb]]
|Work Surface
|To cut glass on and solder if not using glass
|5
|-
|[[File:Foiling Machine.jpg|thumb]]
|Foiling Machine
|For long straight lines
|1
|-
|[[File:Cutting Oil.jpg|thumb]]
|Cutting Oil
|refill the glass cutters
|
|}

Stained Glass Area

2024-09-20T23:44:46Z

Andyoutside: Change image size

Stained Glass Area is located in Classroom 1 along with Visual Arts.

There are 5 Tool Kits that contain:
{| class="wikitable"
|+
!Picture
!Name
!Uses
|-
|[[File:Glass Cutter.jpg|200px]]
|Glass Cutter
|Used to score the glass where you want to break it.
|-
|[[File:Running Pliers.jpg|200px]]
|Running Pliers
|Used to break the glass along the score line
|-
|[[File:Grozier pliers.jpg|200px]]
|Grozer Pliers
|To separate glass or chip bits of glass off
|-
|[[File:Nails and spacers.jpg|200px]]
|Nails and Spacers
|Used to hold the galls in place on the work area
|-
|[[File:Foil Roller.jpg|200px]]
|Foil Roller
|Bend over the foil and then smooth out the foil
|-
|[[File:Plastic Fids.jpg|200px]]
|Plastic Fids
|Used to flatten the foil after using the roller
|-
|[[File:Wood Fids.jpg|200px]]
|Wood Fids
|
|-
|[[File:Mallet.jpg|200px]]
|Mallet
|Put the nails into the work surface
|-
|[[File:Sharpies and writing utensils.jpg|200px]]
|Sharpies and writing utensils.
|Marking the glass
|}

Stained Glass Area

2024-09-20T23:42:51Z

Andyoutside: Tool kit

Stained Glass Area is located in Classroom 1 along with Visual Arts.

There are 5 Tool Kits that contain:
{| class="wikitable"
|+
!Picture
!Name
!Uses
|-
|[[File:Glass Cutter.jpg|thumb]]
|Glass Cutter
|Used to score the glass where you want to break it.
|-
|[[File:Running Pliers.jpg|thumb]]
|Running Pliers
|Used to break the glass along the score line
|-
|[[File:Grozier pliers.jpg|thumb]]
|Grozer Pliers
|To separate glass or chip bits of glass off
|-
|[[File:Nails and spacers.jpg|thumb]]
|Nails and Spacers
|Used to hold the galls in place on the work area
|-
|[[File:Foil Roller.jpg|thumb]]
|Foil Roller
|Bend over the foil and then smooth out the foil
|-
|[[File:Plastic Fids.jpg|thumb]]
|Plastic Fids
|Used to flatten the foil after using the roller
|-
|[[File:Wood Fids.jpg|thumb]]
|Wood Fids
|
|-
|[[File:Mallet.jpg|thumb]]
|Mallet
|Put the nails into the work surface
|-
|[[File:Sharpies and writing utensils.jpg|thumb]]
|Sharpies and writing utensils.
|Marking the glass
|}

Stained Glass Area

2024-09-20T23:21:56Z

Andyoutside: Adding Tools

Stained Glass Area is located in Classroom 1 along with Visual Arts.

There are 5 Tool Kits that contain:
{| class="wikitable"
|+
!Picture
!Name
!Uses
!
|-
|[[File:Glass Cutter.jpg|thumb]]
|Glass Cutter
|Used to score the glass where you want to break it.
|
|-
|
|
|
|
|-
|
|
|
|
|}

File:Foil Rolls.jpg

2024-09-20T23:10:03Z

Andyoutside:

File:Cutting Oil.jpg

2024-09-20T23:08:01Z

Andyoutside:

File:Foiling Machine.jpg

2024-09-20T23:06:11Z

Andyoutside:

File:Work surface.jpg

2024-09-20T23:04:39Z

Andyoutside:

File:Sharpies and writing utensils.jpg

2024-09-20T23:02:09Z

Andyoutside:

File:Mallet.jpg

2024-09-20T23:00:04Z

Andyoutside:

File:Foil Roller.jpg

2024-09-20T22:59:00Z

Andyoutside:

File:Wood Fids.jpg

2024-09-20T22:53:51Z

Andyoutside:

File:Plastic Fids.jpg

2024-09-20T22:53:01Z

Andyoutside:

File:Glass Cutter.jpg

2024-09-20T22:50:36Z

Andyoutside:

File:Nails and spacers.jpg

2024-09-20T22:43:11Z

Andyoutside:

File:Running Pliers.jpg

2024-09-20T22:39:02Z

Andyoutside:

File:Grozier pliers.jpg

2024-09-20T22:34:38Z

Andyoutside:

Stained Glass Area

2024-09-20T22:18:09Z

Andyoutside: Initial start for Stained Glass

Stained Glass Area is located in Classroom 1 along with Visual Arts.