MakeICT Wiki - User contributions [en]

User:Anthony Mitchell

2017-07-29T22:10:24Z

Anthony Mitchell:

Lifelong Wichita resident, student and maker. Non-smoker, social drinker. No cats, no dogs.

Working on [https://www.coloradotech.edu Doctorate of Computer Science], among many other things.

Current Projects at the MakerSpace:
*[[SciFi Movie Night]]
*[[Pi controlled RC Car]]
*[[Game Club]]
*[[Automotive Security/Canbus]]
*[[Artificial Intelligence]]
*[[Ghost-in-the-Shell Tachikoma Spider Robot]]
*[[Akira all-electric motorbike]]
*[[Maker Radio/Video Podcast show]]
*[[Speeduino Automotive Project]]
----

Classes Taught at MakerSpace:
*[[Introduction to Linux]]
*[[Introduction to Kali Linux]]
*[[Computer Literacy for Seniors]]
*[[Intro_to_Arduino]]
*Introduction to Raspberry PI
*Introduction to Python
----
Current Authorizations:

Introduction to Linux

2017-07-08T08:55:24Z

Anthony Mitchell: Created page with "Notes from First Intro to Linux class. Links of Interest LAMP Stack [https://en.wikipedia.org/wiki/LAMP_(software_bundle)] Google App Inventor [http://appinventor.mit.edu/e..."

Notes from First Intro to Linux class. Links of Interest

LAMP Stack [https://en.wikipedia.org/wiki/LAMP_(software_bundle)]

Google App Inventor [http://appinventor.mit.edu/explore/]

SlackWare Linux [http://www.slackware.com/]

Church of the SubGenius [https://en.wikipedia.org/wiki/Church_of_the_SubGenius]

Linux Mint [https://www.linuxmint.com/]

Debian [https://www.debian.org/] [https://en.wikipedia.org/wiki/Debian]

Ubuntu [http://ubuntustudio.org/] [https://www.canonical.com/] [https://www.ubuntu.com/]

BSD [https://en.wikipedia.org/wiki/Berkeley_Software_Distribution]

FreeBSD [https://www.freebsd.org/] [https://en.wikipedia.org/wiki/FreeBSD] [https://en.wikipedia.org/wiki/List_of_BSD_operating_systems]

NetBSD [https://en.wikipedia.org/wiki/NetBSD] [https://www.netbsd.org/] [http://www.makeuseof.com/tag/linux-vs-bsd-which-should-you-use/]

Gentoo [https://www.gentoo.org/] [https://en.wikipedia.org/wiki/Gentoo_Linux]

Raspbian [https://www.raspberrypi.org/downloads/raspbian/] [https://en.wikipedia.org/wiki/Raspbian]

Command Line Cheat Sheet [https://www.cheatography.com/davechild/cheat-sheets/linux-command-line/] [https://www.linuxtrainingacademy.com/linux-commands-cheat-sheet/]

Man Pages. [https://www.kernel.org/doc/man-pages/] [http://man7.org/linux/man-pages/dir_by_project.html]

Virtual Machine [https://virtualbox.org]

coursera [https://www.coursera.org/]

cybrary it [https://www.cybrary.it/]

Open University [http://www.open.ac.uk/] [http://www9.open.ac.uk/mct/people/Cory_Doctorow_12B0]

Arduino IDE [https://www.arduino.cc/en/Main/Software]

Scratch [https://scratch.mit.edu/] [https://en.wikipedia.org/wiki/Scratch_(programming_language)]

Python [https://www.python.org/]

Visual Studio Online [https://www.visualstudio.com/]

User:Anthony Mitchell

2017-07-08T08:51:22Z

Anthony Mitchell:

Lifelong Wichita resident, student and maker. Non-smoker, social drinker. No cats, no dogs.

Working on [https://www.coloradotech.edu Doctorate of Computer Science], among many other things.

Current Projects at the MakerSpace:
*[[SciFi Movie Night]]
*[[Pi controlled RC Car]]
*[[Game Club]]
*[[Automotive Security/Canbus]]
*[[Artificial Intelligence]]
*[[Ghost-in-the-Shell Tachikoma Spider Robot]]
*Akira all-electric motorbike
*[[Maker Radio/Video Podcast show]]

----

Classes Taught at MakerSpace:
*[[Introduction to Linux]]
*[[Introduction to Kali Linux]]
*[[Computer Literacy for Seniors]]
*[[Intro_to_Arduino]]
*Introduction to Raspberry PI
*Introduction to Python
----
Current Authorizations:

User:Anthony Mitchell

2017-05-29T20:20:52Z

Anthony Mitchell:

Lifelong Wichita resident, student and maker. Non-smoker, social drinker. No cats, no dogs.

Working on [https://www.coloradotech.edu Doctorate of Computer Science], among many other things.

Current Projects at the MakerSpace:
*[[SciFi Movie Night]]
*[[Pi controlled RC Car]]
*[[Game Club]]
*[[Automotive Security/Canbus]]
*[[Artificial Intelligence]]
*[[Ghost-in-the-Shell Tachikoma Spider Robot]]
*Akira all-electric motorbike
*[[Maker Radio/Video Podcast show]]

----

Classes Taught at MakerSpace:
*Introduction to Linux
*[[Introduction to Kali Linux]]
*[[Computer Literacy for Seniors]]
*[[Intro_to_Arduino]]
*Introduction to Raspberry PI
*Introduction to Python
----
Current Authorizations:

SciFi Movie Night

2017-05-29T20:07:00Z

Anthony Mitchell:

Friday 5/26/2017

6pm:

7:30pm:

Saturday 5/27/2017

6pm:

8pm:

Sunday 5/28/2017

6pm:

8pm:

Friday 5/19/2017

6pm: Buck Rogers in the 25th Century Pilot [https://en.wikipedia.org/wiki/Buck_Rogers_in_the_25th_Century_(TV_series)]

7:30pm: FarScape Season 1 Pilot [https://en.wikipedia.org/wiki/Farscape]

Saturday 5/20/2017

6pm: Mysterious Island [https://en.wikipedia.org/wiki/Mysterious_Island_(1961_film)]

8:00pm: The Expanse Season 1 Episode 6 [https://en.wikipedia.org/wiki/The_Expanse_(TV_series)]

Sunday 5/21/2017

4pm: Hang Em High [https://en.wikipedia.org/wiki/Hang_%27Em_High]

6pm: Lone Wolf & Cub [https://en.wikipedia.org/wiki/Lone_Wolf_and_Cub:_Sword_of_Vengeance]

8pm: Crimson Bat [https://en.wikipedia.org/wiki/Crimson_Bat]

Ghost-in-the-Shell Tachikoma Spider Robot

2017-05-20T04:21:50Z

Anthony Mitchell:

In the planning stages of constructing one (or several) Tachikoma robots. Until then, here are some nice videos and links of
other peoples projects:

https://www.youtube.com/watch?v=p1xwF6y8MOs

https://www.youtube.com/watch?v=mL4dOm5t9Bs

https://www.youtube.com/watch?v=Dwk0PqG0xg0

https://www.youtube.com/watch?v=YxBM8DbaEXw

https://www.linkedin.com/in/reo-matsumura-b94b6238/?ppe=1 Reo Mastumura is the lead roboticist over the realize project, a group of people trying to bring tech shown in the GITS movies to life.

https://www.youtube.com/watch?v=qVC7_t92X8Y

https://www.youtube.com/watch?v=0CyUZk6jW7M

https://www.youtube.com/watch?v=JG5PZaEKzYU

https://www.youtube.com/watch?v=QR7vwRC6SFE

https://www.youtube.com/watch?v=3SbEZtozT3w

https://www.youtube.com/watch?v=3yUlR9TWsCE

https://www.youtube.com/watch?v=qu_4UEwsesE

https://hackaday.com/tag/ghost-in-the-shell/

User:Anthony Mitchell

2017-05-20T03:39:27Z

Anthony Mitchell:

Simple Man.
Lifelong Wichita resident, student and maker. Non-smoker, social drinker. No cats, no dogs.

Working on [https://www.coloradotech.edu Doctorate of Computer Science], among many other things.

Current Projects at the MakerSpace:
*[[SciFi Movie Night]]
*Raspberry Pi-controlled Autonomous Car
*[[Game Club]]
*Carberry
*Automotive Security/Canbus
*Artificial Intelligence
*[[Ghost-in-the-Shell Tachikoma Spider Robot]]
*Akira all-electric motorbike
*[[Maker Radio/Video Podcast show]]

Classes Taught at MakerSpace:
*Introduction to Linux *Introduction to Kali Linux
*[[Intro_to_Arduino]]
*Introduction to Raspberry PI
*[[Computer Literacy for Seniors]]
*Introduction to Python
----
Current Authorizations:

User:Anthony Mitchell

2017-05-20T03:35:59Z

Anthony Mitchell:

Simple Man.
Lifelong Wichita resident, student and maker. Non-smoker, social drinker. No cats, no dogs.

Working on [Doctorate of Computer Science https://www.coloradotech.edu], among many other things.

Current Projects at the MakerSpace:
*[[SciFi Movie Night]]
*Raspberry Pi-controlled Autonomous Car
*[[Game Club]]
*Carberry
*Automotive Security/Canbus
*Artificial Intelligence
*[[Ghost-in-the-Shell Tachikoma Spider Robot]]
*Akira all-electric motorbike
*[[Maker Radio/Video Podcast show]]

Classes Taught at MakerSpace:
*Introduction to Linux *Introduction to Kali Linux
*[[Intro_to_Arduino]]
*Introduction to Raspberry PI
*[[Computer Literacy for Seniors]]
*Introduction to Python
----
Current Authorizations:

Ghost-in-the-Shell Tachikoma Spider Robot

2017-05-20T03:19:46Z

Anthony Mitchell: Created page with "In the planning stages of constructing one (or several) Tachikoma robots. Until then, here are some nice videos and links of other peoples projects: https://www.youtube.com/..."

User:Anthony Mitchell

2017-05-20T02:58:27Z

Anthony Mitchell:

Simple Man.
Lifelong Wichita resident, student and maker. Non-smoker, social drinker. No cats, no dogs.

Working on Doctorate of Computer Science, among many other things.

Current Projects at the MakerSpace:
*[[SciFi Movie Night]]
*Raspberry Pi-controlled Autonomous Car
*[[Game Club]]
*Carberry
*Automotive Security/Canbus
*Artificial Intelligence
*[[Ghost-in-the-Shell Tachikoma Spider Robot]]
*Akira all-electric motorbike
*[[Maker Radio/Video Podcast show]]

Classes Taught at MakerSpace:
*Introduction to Linux
*Introduction to Arduino
*Introduction to Raspberry PI
*Computer Literacy for Seniors
*Introduction to Python

SciFi Movie Night

2017-05-20T02:55:30Z

Anthony Mitchell: Created page with "Friday 5/19/2017 6pm: Buck Rogers in the 25th Century Pilot [https://en.wikipedia.org/wiki/Buck_Rogers_in_the_25th_Century_(TV_series)] 7:30pm: FarScape Season 1 Pilot [http..."

Friday 5/19/2017

6pm: Buck Rogers in the 25th Century Pilot [https://en.wikipedia.org/wiki/Buck_Rogers_in_the_25th_Century_(TV_series)]

7:30pm: FarScape Season 1 Pilot [https://en.wikipedia.org/wiki/Farscape]

Saturday 5/20/2017

6pm: Mysterious Island [https://en.wikipedia.org/wiki/Mysterious_Island_(1961_film)]

8:00pm: The Expanse Season 1 Episode 6 [https://en.wikipedia.org/wiki/The_Expanse_(TV_series)]

Sunday 5/21/2017

4pm: Hang Em High [https://en.wikipedia.org/wiki/Hang_%27Em_High]

6pm: Lone Wolf & Cub [https://en.wikipedia.org/wiki/Lone_Wolf_and_Cub:_Sword_of_Vengeance]

8pm: Crimson Bat [https://en.wikipedia.org/wiki/Crimson_Bat]

User:Anthony Mitchell

2017-05-20T02:49:59Z

Anthony Mitchell:

Simple Man.
Lifelong Wichita resident, student and maker. Non-smoker, social drinker. No cats, no dogs.

Working on Doctorate of Computer Science, among many other things.

Current Projects at the MakerSpace:
*[[SciFi Movie Night]]
*Raspberry Pi-controlled Autonomous Car
*Chess\Game Club
*Carberry
*Automotive Security/Canbus
*Artificial Intelligence
*Ghost-in-the-Shell Tachikoma Spider Robot
*Akira all-electric motorbike
*Maker Radio/Video Podcast show

Classes Taught at MakerSpace:
*Introduction to Linux
*Introduction to Arduino
*Introduction to Raspberry PI
*Computer Literacy for Seniors
*Introduction to Python

User talk:Anthony Mitchell

2017-05-19T08:59:10Z

Anthony Mitchell: Created page with "Must remember to: Provide external links"

Must remember to: Provide external links

User:Anthony Mitchell

2017-05-19T08:58:09Z

Anthony Mitchell:

Simple Man.
Lifelong Wichita resident, student and maker. Non-smoker, social drinker. No cats, no dogs.

Working on Doctorate of Computer Science, among many other things.

Current Projects at the MakerSpace:
*SciFi Movie Night
*Raspberry Pi-controlled Autonomous Car
*Chess\Game Club
*Carberry
*Automotive Security/Canbus
*Artificial Intelligence
*Ghost-in-the-Shell Tachikoma Spider Robot
*Akira all-electric motorbike
*Maker Radio/Video Podcast show

Classes Taught at MakerSpace:
*Introduction to Linux
*Introduction to Arduino
*Introduction to Raspberry PI
*Computer Literacy for Seniors
*Introduction to Python

Classrooms

2017-04-29T07:28:31Z

Anthony Mitchell:

MakeICT's classroom is a 750 sq ft area for workshops/classes, events, and shared workspace. It will provide a modern learning environment with all the tools needed by an instructor or student for teaching or learning.

== Remodel ==
There are a few improvements planned for the classroom:
*Hallway wall - to keep the classroom isolated during classes.
*Carpet, drop ceiling, and west wall - to make the classroom modern and clean
*A/V system - so that it is plug'n'play for instructors no matter what equipment they have or use.
*PC Lab - Midrange workstations good for graphics and computation more than the laptops can handle

The first two items are happening right now, so there may be some construction going on at various times. We will attempt to keep out of the way and work around classes, but we apologize in advance for any inconvenience.

== Access Policy ==
===Classroom===
The classroom is reserved for workshops and classes according to the [http://makeict.org/calendar calendar]. It can also be reserved by members following this policy:
<blockquote>A keyed-member in good standing may host a private meeting/event at the MakeICT makerspace as long as they are not charging a fee. If any rooms or resources are to be held or if the number of non-member guests exceeds the Guest Policy allowance, a reservation must be submitted and approved 14 days in advanced. The host member is responsible/liable for activities of their guests, and all guests must follow official guest policies. There is no fee for this resource to our members, but a donation is suggested to offset facility costs.</blockquote>

Fill out the [http://makeict.org/reservations/ reservation form] to reserve the classroom for private meetings/events.

During times when it hasn't been reserved, it shall be considered a shared workspace.

===Laptops===
Members using the laptops agree to return them to the proper shelf and plug them in when finished, and keep them out of dirty and dusty areas such as the metal shop, wood shop, and ceramics room. The laptops are not to be removed from the Makerspace. To protect your personal information, it is strongly recommended to only access the internet from an Incognito window, and properly log out of all websites when finished browsing.

===Software Installed===
{| class="wikitable sortable"
|-
!Software
!Linux
!Windows
|-
| [https://ultimaker.com/en/products/cura-software Cura]
|
|
|-
| [https://blender.org Blender]
|
|
|-
| [https://www.gimp.org/ Gimp]
|
|
|-
| [https://inkscape.org/en/ Inkscape]
|
|
|-
| [http://www.autodesk.com/products/eagle/overview/ EagleCAD]
|
|
|-
| [http://kicad-pcb.org/ KiCAD]
|
|
|-
| [https://www.arduino.cc/ Arduino]
|
|
|-
| Bitmap to Component Converter
|
|
|-
| PCB Calculator
|
|
|-
| Slic3r
|
|
|-
| Laser Cutter
|
|
|-
| Fusion 360
|
|
|-
| DraftSight
|
|
|-
| Visual Studio
|
|
|}

===Software Wanted to be installed on new images===
{| class="wikitable sortable"
|-
!Software
!Linux
!Windows
!Link
!License
|-
| Cura
| X
| X
| [https://ultimaker.com/en/products/cura-software]
| GNU AGPL V3
|-
| Blender
| X
| X
| [https://blender.org]
| GPL
|-
| Gimp
| X
| X
| [https://www.gimp.org/]
| GPL
|-
| Inkscape
| X
| X
| [https://inkscape.org/en/]
| GPL 2
|-
| KiCAD
| X
| X
| [http://kicad-pcb.org/]
| GPL 3
|-
| Arduino
| X
| X
| [https://www.arduino.cc/]
| GPL
|-
| Eclipse IDE
|X
|X
| [http://www.eclipse.org/]
|EPL
|-
| Ninja IDE
|X
|X
| [http://www.ninja-ide.org/]
|GPL v3
|-
| NotePad ++
|X
|X
| [https://notepad-plus-plus.org/]
|GPL
|-
| Bitmap to Component Converter
|
|
|
|
|-
| PCB Calculator
|
|
|
|
|-
| Slic3r
|
|
|
|
|-
| Laser Cut Demo
|
|
|
|
|-
| Fusion 360
|
|
|
|
|-
|
|-
|}

== Equipment List ==
<onlyinclude>
* 1x [http://www.optomausa.com/projectordetails.aspx?PTypeDB=Business&PC=EH500 Optoma EH500 DLP Projector]
** Full HD 1080p
** 4700 Lumens
** HDMI, DisplayPort, 2xVGA
* 15x [http://support.toshiba.com/support/modelHome?freeText=1200009402 Toshiba S55T-B5152 Laptops]
** Dual-boot Debian Stretch (GNU/Linux) / Windows 10
** Intel i5
** 4gb RAM
** 500gb hard drive
** Intel HD Graphics + 1920x1080 Touchscreen display
** SD card reader
* 3x [http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c01926406 HP Pro 3005MT Internet-connected desktop PC's]
** PC 1: [http://ubuntustudio.org/ Ubuntu Studio] (GNU/Linux), PC2: Windows10/[http://ubuntustudio.org/ Ubuntu Studio] (gNU/Linux), PC3: Windows 7
** AMD Athlon II X3 435 (triple-core)
** 2.7gb RAM
** 300gb hard drive
** NVIDIA GeForce 9100
* 1x [http://www.dell.com/support/home/us/en/19/product-support/product/dell-3000cn/drivers Dell 3000cn Laser Printer]
** IP 192.168.9.229 port 9100
* 1x [http://support.hp.com/us-en/product/HP-Photosmart-C5200-All-in-One-Printer-series/3204462/model/3204463 HP Photosmart C5280 Scanner] - (it's actually an all-in-one, but the printer part isn't working)
** The scanner is connected to the adjacent PC. To scan a document, open the System Menu and select ''Graphics > Simple Scan''
* 1x [[Plotter]] HP Designjet 1050c plus
** Capable of up to 36 inch wide prints.
** Due to the cost of ink, designs should use colors instead of blacks.
* 1x [https://support.hp.com/us-en/product/HP-Deskjet-3510-e-All-in-One-Printer-series/5157460 HP DeskJet 3410]
** Backup 3in1 for Classroom
</onlyinclude>

Classrooms

2017-04-29T07:19:02Z

Anthony Mitchell: /* Software Wanted to be installed on new images */

MakeICT's classroom is a 750 sq ft area for workshops/classes, events, and shared workspace. It will provide a modern learning environment with all the tools needed by an instructor or student for teaching or learning.

== Remodel ==
There are a few improvements planned for the classroom:
*Hallway wall - to keep the classroom isolated during classes.
*Carpet, drop ceiling, and west wall - to make the classroom modern and clean
*A/V system - so that it is plug'n'play for instructors no matter what equipment they have or use.
*PC Lab - Midrange workstations good for graphics and computation more than the laptops can handle

The first two items are happening right now, so there may be some construction going on at various times. We will attempt to keep out of the way and work around classes, but we apologize in advance for any inconvenience.

== Access Policy ==
===Classroom===
The classroom is reserved for workshops and classes according to the [http://makeict.org/calendar calendar]. It can also be reserved by members following this policy:
<blockquote>A keyed-member in good standing may host a private meeting/event at the MakeICT makerspace as long as they are not charging a fee. If any rooms or resources are to be held or if the number of non-member guests exceeds the Guest Policy allowance, a reservation must be submitted and approved 14 days in advanced. The host member is responsible/liable for activities of their guests, and all guests must follow official guest policies. There is no fee for this resource to our members, but a donation is suggested to offset facility costs.</blockquote>

Fill out the [http://makeict.org/reservations/ reservation form] to reserve the classroom for private meetings/events.

During times when it hasn't been reserved, it shall be considered a shared workspace.

===Laptops===
Members using the laptops agree to return them to the proper shelf and plug them in when finished, and keep them out of dirty and dusty areas such as the metal shop, wood shop, and ceramics room. The laptops are not to be removed from the Makerspace. To protect your personal information, it is strongly recommended to only access the internet from an Incognito window, and properly log out of all websites when finished browsing.

===Software Installed===
{| class="wikitable sortable"
|-
!Software
!Linux
!Windows
|-
| Cura
|
|
|-
| Blender
|
|
|-
| Gimp
|
|
|-
| Inkscape
|
|
|-
| EagleCAD
|
|
|-
| KiCAD
|
|
|-
| Arduino
|
|
|-
| Bitmap to Component Converter
|
|
|-
| PCB Calculator
|
|
|-
| Slic3r
|
|
|-
| Laser Cutter
|
|
|-
| Fusion 360
|
|
|-
| DraftSight
|
|
|-
| Visual Studio
|
|
|}

===Software Wanted to be installed on new images===
{| class="wikitable sortable"
|-
!Software
!Linux
!Windows
!Link
!License
|-
| Cura
| X
| X
| [https://ultimaker.com/en/products/cura-software]
| GNU AGPL V3
|-
| Blender
| X
| X
| [https://blender.org]
| GPL
|-
| Gimp
| X
| X
| [https://www.gimp.org/]
| GPL
|-
| Inkscape
| X
| X
| [https://inkscape.org/en/]
| GPL 2
|-
| KiCAD
| X
| X
| [http://kicad-pcb.org/]
| GPL 3
|-
| Arduino
| X
| X
| [https://www.arduino.cc/]
| GPL
|-
| Eclipse IDE
|X
|X
| [http://www.eclipse.org/]
|EPL
|-
| Ninja IDE
|X
|X
| [http://www.ninja-ide.org/]
|GPL v3
|-
| NotePad ++
|X
|X
| [https://notepad-plus-plus.org/]
|GPL
|-
| Bitmap to Component Converter
|
|
|
|
|-
| PCB Calculator
|
|
|
|
|-
| Slic3r
|
|
|
|
|-
| Laser Cut Demo
|
|
|
|
|-
| Fusion 360
|
|
|
|
|-
|
|-
|}

== Equipment List ==
<onlyinclude>
* 1x [http://www.optomausa.com/projectordetails.aspx?PTypeDB=Business&PC=EH500 Optoma EH500 DLP Projector]
** Full HD 1080p
** 4700 Lumens
** HDMI, DisplayPort, 2xVGA
* 15x [http://support.toshiba.com/support/modelHome?freeText=1200009402 Toshiba S55T-B5152 Laptops]
** Dual-boot Debian Stretch (GNU/Linux) / Windows 10
** Intel i5
** 4gb RAM
** 500gb hard drive
** Intel HD Graphics + 1920x1080 Touchscreen display
** SD card reader
* 3x [http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c01926406 HP Pro 3005MT Internet-connected desktop PC's]
** PC 1: [http://ubuntustudio.org/ Ubuntu Studio] (GNU/Linux), PC2: Windows10/[http://ubuntustudio.org/ Ubuntu Studio] (gNU/Linux), PC3: Windows 7
** AMD Athlon II X3 435 (triple-core)
** 2.7gb RAM
** 300gb hard drive
** NVIDIA GeForce 9100
* 1x [http://www.dell.com/support/home/us/en/19/product-support/product/dell-3000cn/drivers Dell 3000cn Laser Printer]
** IP 192.168.9.229 port 9100
* 1x [http://support.hp.com/us-en/product/HP-Photosmart-C5200-All-in-One-Printer-series/3204462/model/3204463 HP Photosmart C5280 Scanner] - (it's actually an all-in-one, but the printer part isn't working)
** The scanner is connected to the adjacent PC. To scan a document, open the System Menu and select ''Graphics > Simple Scan''
* 1x [[Plotter]] HP Designjet 1050c plus
** Capable of up to 36 inch wide prints.
** Due to the cost of ink, designs should use colors instead of blacks.
* 1x [https://support.hp.com/us-en/product/HP-Deskjet-3510-e-All-in-One-Printer-series/5157460 HP DeskJet 3410]
** Backup 3in1 for Classroom
</onlyinclude>

Classrooms

2017-04-29T07:16:24Z

Anthony Mitchell: /* Equipment List */

MakeICT's classroom is a 750 sq ft area for workshops/classes, events, and shared workspace. It will provide a modern learning environment with all the tools needed by an instructor or student for teaching or learning.

== Remodel ==
There are a few improvements planned for the classroom:
*Hallway wall - to keep the classroom isolated during classes.
*Carpet, drop ceiling, and west wall - to make the classroom modern and clean
*A/V system - so that it is plug'n'play for instructors no matter what equipment they have or use.
*PC Lab - Midrange workstations good for graphics and computation more than the laptops can handle

The first two items are happening right now, so there may be some construction going on at various times. We will attempt to keep out of the way and work around classes, but we apologize in advance for any inconvenience.

== Access Policy ==
===Classroom===
The classroom is reserved for workshops and classes according to the [http://makeict.org/calendar calendar]. It can also be reserved by members following this policy:
<blockquote>A keyed-member in good standing may host a private meeting/event at the MakeICT makerspace as long as they are not charging a fee. If any rooms or resources are to be held or if the number of non-member guests exceeds the Guest Policy allowance, a reservation must be submitted and approved 14 days in advanced. The host member is responsible/liable for activities of their guests, and all guests must follow official guest policies. There is no fee for this resource to our members, but a donation is suggested to offset facility costs.</blockquote>

Fill out the [http://makeict.org/reservations/ reservation form] to reserve the classroom for private meetings/events.

During times when it hasn't been reserved, it shall be considered a shared workspace.

===Laptops===
Members using the laptops agree to return them to the proper shelf and plug them in when finished, and keep them out of dirty and dusty areas such as the metal shop, wood shop, and ceramics room. The laptops are not to be removed from the Makerspace. To protect your personal information, it is strongly recommended to only access the internet from an Incognito window, and properly log out of all websites when finished browsing.

===Software Installed===
{| class="wikitable sortable"
|-
!Software
!Linux
!Windows
|-
| Cura
|
|
|-
| Blender
|
|
|-
| Gimp
|
|
|-
| Inkscape
|
|
|-
| EagleCAD
|
|
|-
| KiCAD
|
|
|-
| Arduino
|
|
|-
| Bitmap to Component Converter
|
|
|-
| PCB Calculator
|
|
|-
| Slic3r
|
|
|-
| Laser Cutter
|
|
|-
| Fusion 360
|
|
|-
| DraftSight
|
|
|-
| Visual Studio
|
|
|}

===Software Wanted to be installed on new images===
{| class="wikitable sortable"
|-
!Software
!Linux
!Windows
!Link
!License
|-
| Cura
| X
| X
| [https://ultimaker.com/en/products/cura-software]
| GNU AGPL V3
|-
| Blender
| X
| X
| [https://blender.org]
| GPL
|-
| Gimp
| X
| X
| [https://www.gimp.org/]
| GPL
|-
| Inkscape
| X
| X
| [https://inkscape.org/en/]
| GPL 2
|-
| KiCAD
| X
| X
| [http://kicad-pcb.org/]
| GPL 3
|-
| Arduino
| X
| X
| [https://www.arduino.cc/]
| GPL
|-
| Bitmap to Component Converter
|
|
|
|
|-
| PCB Calculator
|
|
|
|
|-
| Slic3r
|
|
|
|
|-
| Laser Cut Demo
|
|
|
|
|-
| Fusion 360
|
|
|
|
|-
| Eclipse IDE
|X
|X
| [http://www.eclipse.org/]
|EPL
|-
| Ninja IDE
|X
|X
| [http://www.ninja-ide.org/]
|GPL v3
|-
| NotePad ++
|X
|X
| [https://notepad-plus-plus.org/]
|GPL
|-
|}

== Equipment List ==
<onlyinclude>
* 1x [http://www.optomausa.com/projectordetails.aspx?PTypeDB=Business&PC=EH500 Optoma EH500 DLP Projector]
** Full HD 1080p
** 4700 Lumens
** HDMI, DisplayPort, 2xVGA
* 15x [http://support.toshiba.com/support/modelHome?freeText=1200009402 Toshiba S55T-B5152 Laptops]
** Dual-boot Debian Stretch (GNU/Linux) / Windows 10
** Intel i5
** 4gb RAM
** 500gb hard drive
** Intel HD Graphics + 1920x1080 Touchscreen display
** SD card reader
* 3x [http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c01926406 HP Pro 3005MT Internet-connected desktop PC's]
** PC 1: [http://ubuntustudio.org/ Ubuntu Studio] (GNU/Linux), PC2: Windows10/[http://ubuntustudio.org/ Ubuntu Studio] (gNU/Linux), PC3: Windows 7
** AMD Athlon II X3 435 (triple-core)
** 2.7gb RAM
** 300gb hard drive
** NVIDIA GeForce 9100
* 1x [http://www.dell.com/support/home/us/en/19/product-support/product/dell-3000cn/drivers Dell 3000cn Laser Printer]
** IP 192.168.9.229 port 9100
* 1x [http://support.hp.com/us-en/product/HP-Photosmart-C5200-All-in-One-Printer-series/3204462/model/3204463 HP Photosmart C5280 Scanner] - (it's actually an all-in-one, but the printer part isn't working)
** The scanner is connected to the adjacent PC. To scan a document, open the System Menu and select ''Graphics > Simple Scan''
* 1x [[Plotter]] HP Designjet 1050c plus
** Capable of up to 36 inch wide prints.
** Due to the cost of ink, designs should use colors instead of blacks.
* 1x [https://support.hp.com/us-en/product/HP-Deskjet-3510-e-All-in-One-Printer-series/5157460 HP DeskJet 3410]
** Backup 3in1 for Classroom
</onlyinclude>

User:Anthony Mitchell

2017-04-28T09:42:44Z

Anthony Mitchell:

Simple Man.
Lifelong Wichita resident, student and maker. Non-smoker, social drinker. No cats, no dogs.

Working on Doctorate of Computer Science, among many other things.

Current Projects at the MakerSpace:
*SciFi Movie Night
*Kung-Fu Movie Night
*Raspberry Pi-controlled Autonomous Car
*Chess Club
*Carberry
*Automotive Security/Canbus
*Artificial Intelligence

Classes Taught at MakerSpace:
*Introduction to Linux
*Introduction to Arduino
*Introduction to Raspberry PI
*Introduction to Python
*Computer Literacy for Seniors

Classrooms

2017-04-27T11:18:10Z

Anthony Mitchell: /* Software Wanted to be installed on new images */

MakeICT's classroom is a 750 sq ft area for workshops/classes, events, and shared workspace. It will provide a modern learning environment with all the tools needed by an instructor or student for teaching or learning.

== Remodel ==
There are a few improvements planned for the classroom:
*Hallway wall - to keep the classroom isolated during classes.
*Carpet, drop ceiling, and west wall - to make the classroom modern and clean
*A/V system - so that it is plug'n'play for instructors no matter what equipment they have or use.
*PC Lab - Midrange workstations good for graphics and computation more than the laptops can handle

The first two items are happening right now, so there may be some construction going on at various times. We will attempt to keep out of the way and work around classes, but we apologize in advance for any inconvenience.

== Access Policy ==
===Classroom===
The classroom is reserved for workshops and classes according to the [http://makeict.org/calendar calendar]. It can also be reserved by members following this policy:
<blockquote>A keyed-member in good standing may host a private meeting/event at the MakeICT makerspace as long as they are not charging a fee. If any rooms or resources are to be held or if the number of non-member guests exceeds the Guest Policy allowance, a reservation must be submitted and approved 14 days in advanced. The host member is responsible/liable for activities of their guests, and all guests must follow official guest policies. There is no fee for this resource to our members, but a donation is suggested to offset facility costs.</blockquote>

Fill out the [http://makeict.org/reservations/ reservation form] to reserve the classroom for private meetings/events.

During times when it hasn't been reserved, it shall be considered a shared workspace.

===Laptops===
Members using the laptops agree to return them to the proper shelf and plug them in when finished, and keep them out of dirty and dusty areas such as the metal shop, wood shop, and ceramics room. The laptops are not to be removed from the Makerspace. To protect your personal information, it is strongly recommended to only access the internet from an Incognito window, and properly log out of all websites when finished browsing.

===Software Installed===
{| class="wikitable sortable"
|-
!Software
!Linux
!Windows
|-
| Cura
|
|
|-
| Blender
|
|
|-
| Gimp
|
|
|-
| Inkscape
|
|
|-
| EagleCAD
|
|
|-
| KiCAD
|
|
|-
| Arduino
|
|
|-
| Bitmap to Component Converter
|
|
|-
| PCB Calculator
|
|
|-
| Slic3r
|
|
|-
| Laser Cutter
|
|
|-
| Fusion 360
|
|
|-
| DraftSight
|
|
|-
| Visual Studio
|
|
|}

===Software Wanted to be installed on new images===
{| class="wikitable sortable"
|-
!Software
!Linux
!Windows
!Link
!License
|-
| Cura
| X
| X
| [https://ultimaker.com/en/products/cura-software]
| GNU AGPL V3
|-
| Blender
| X
| X
| [https://blender.org]
| GPL
|-
| Gimp
| X
| X
| [https://www.gimp.org/]
| GPL
|-
| Inkscape
| X
| X
| [https://inkscape.org/en/]
| GPL 2
|-
| KiCAD
| X
| X
| [http://kicad-pcb.org/]
| GPL 3
|-
| Arduino
| X
| X
| [https://www.arduino.cc/]
| GPL
|-
| Bitmap to Component Converter
|
|
|
|
|-
| PCB Calculator
|
|
|
|
|-
| Slic3r
|
|
|
|
|-
| Laser Cut Demo
|
|
|
|
|-
| Fusion 360
|
|
|
|
|-
| Eclipse IDE
|X
|X
| [http://www.eclipse.org/]
|EPL
|-
| Ninja IDE
|X
|X
| [http://www.ninja-ide.org/]
|GPL v3
|-
| NotePad ++
|X
|X
| [https://notepad-plus-plus.org/]
|GPL
|-
|}

== Equipment List ==
<onlyinclude>
* 1x [http://www.optomausa.com/projectordetails.aspx?PTypeDB=Business&PC=EH500 Optoma EH500 DLP Projector]
** Full HD 1080p
** 4700 Lumens
** HDMI, DisplayPort, 2xVGA
* 15x [http://support.toshiba.com/support/modelHome?freeText=1200009402 Toshiba S55T-B5152 Laptops]
** Dual-boot Debian Stretch (GNU/Linux) / Windows 10
** Intel i5
** 4gb RAM
** 500gb hard drive
** Intel HD Graphics + 1920x1080 Touchscreen display
** SD card reader
* 3x [http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c01926406 HP Pro 3005MT Internet-connected desktop PC's]
** PC 1: [http://ubuntustudio.org/ Ubuntu Studio] (GNU/Linux), PC2: Windows10/[http://ubuntustudio.org/ Ubuntu Studio] (gNU/Linux), PC3: Windows 7
** AMD Athlon II X3 435 (triple-core)
** 2.7gb RAM
** 300gb hard drive
** NVIDIA GeForce 9100
* 1x [http://www.dell.com/support/home/us/en/19/product-support/product/dell-3000cn/drivers Dell 3000cn Laser Printer]
** IP 192.168.9.229 port 9100
* 1x [http://support.hp.com/us-en/product/HP-Photosmart-C5200-All-in-One-Printer-series/3204462/model/3204463 HP Photosmart C5280 Scanner] - (it's actually an all-in-one, but the printer part isn't working)
** The scanner is connected to the adjacent PC. To scan a document, open the System Menu and select ''Graphics > Simple Scan''
* 1x [[Plotter]] HP Designjet 1050c plus
** Capable of up to 36 inch wide prints.
** Due to the cost of ink, designs should use colors instead of blacks.

</onlyinclude>

Classrooms

2017-04-27T11:12:35Z

Anthony Mitchell:

MakeICT's classroom is a 750 sq ft area for workshops/classes, events, and shared workspace. It will provide a modern learning environment with all the tools needed by an instructor or student for teaching or learning.

== Remodel ==
There are a few improvements planned for the classroom:
*Hallway wall - to keep the classroom isolated during classes.
*Carpet, drop ceiling, and west wall - to make the classroom modern and clean
*A/V system - so that it is plug'n'play for instructors no matter what equipment they have or use.
*PC Lab - Midrange workstations good for graphics and computation more than the laptops can handle

The first two items are happening right now, so there may be some construction going on at various times. We will attempt to keep out of the way and work around classes, but we apologize in advance for any inconvenience.

== Access Policy ==
===Classroom===
The classroom is reserved for workshops and classes according to the [http://makeict.org/calendar calendar]. It can also be reserved by members following this policy:
<blockquote>A keyed-member in good standing may host a private meeting/event at the MakeICT makerspace as long as they are not charging a fee. If any rooms or resources are to be held or if the number of non-member guests exceeds the Guest Policy allowance, a reservation must be submitted and approved 14 days in advanced. The host member is responsible/liable for activities of their guests, and all guests must follow official guest policies. There is no fee for this resource to our members, but a donation is suggested to offset facility costs.</blockquote>

Fill out the [http://makeict.org/reservations/ reservation form] to reserve the classroom for private meetings/events.

During times when it hasn't been reserved, it shall be considered a shared workspace.

===Laptops===
Members using the laptops agree to return them to the proper shelf and plug them in when finished, and keep them out of dirty and dusty areas such as the metal shop, wood shop, and ceramics room. The laptops are not to be removed from the Makerspace. To protect your personal information, it is strongly recommended to only access the internet from an Incognito window, and properly log out of all websites when finished browsing.

===Software Installed===
{| class="wikitable sortable"
|-
!Software
!Linux
!Windows
|-
| Cura
|
|
|-
| Blender
|
|
|-
| Gimp
|
|
|-
| Inkscape
|
|
|-
| EagleCAD
|
|
|-
| KiCAD
|
|
|-
| Arduino
|
|
|-
| Bitmap to Component Converter
|
|
|-
| PCB Calculator
|
|
|-
| Slic3r
|
|
|-
| Laser Cutter
|
|
|-
| Fusion 360
|
|
|-
| DraftSight
|
|
|-
| Visual Studio
|
|
|}

===Software Wanted to be installed on new images===
{| class="wikitable sortable"
|-
!Software
!Linux
!Windows
!Link
!License
|-
| Cura
| X
| X
| [https://ultimaker.com/en/products/cura-software]
| GNU AGPL V3
|-
| Blender
| X
| X
| [https://blender.org]
| GPL
|-
| Gimp
| X
| X
| [https://www.gimp.org/]
| GPL
|-
| Inkscape
| X
| X
| [https://inkscape.org/en/]
| GPL 2
|-
| KiCAD
| X
| X
| [http://kicad-pcb.org/]
| GPL 3
|-
| Arduino
| X
| X
| [https://www.arduino.cc/]
| GPL
|-
| Bitmap to Component Converter
|
|
|
|
|-
| PCB Calculator
|
|
|
|
|-
| Slic3r
|
|
|
|
|-
| Laser Cut Demo
|
|
|
|
|-
| Fusion 360
|
|
|
|
|-
| Eclipse IDE
|X
|X
| [http://www.eclipse.org/]
|
|-
| Ninja IDE
|X
|X
| [http://www.ninja-ide.org/]
|
|-
| NotePad ++
|X
|X
| [https://notepad-plus-plus.org/]
|
|-
|}

== Equipment List ==
<onlyinclude>
* 1x [http://www.optomausa.com/projectordetails.aspx?PTypeDB=Business&PC=EH500 Optoma EH500 DLP Projector]
** Full HD 1080p
** 4700 Lumens
** HDMI, DisplayPort, 2xVGA
* 15x [http://support.toshiba.com/support/modelHome?freeText=1200009402 Toshiba S55T-B5152 Laptops]
** Dual-boot Debian Stretch (GNU/Linux) / Windows 10
** Intel i5
** 4gb RAM
** 500gb hard drive
** Intel HD Graphics + 1920x1080 Touchscreen display
** SD card reader
* 3x [http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c01926406 HP Pro 3005MT Internet-connected desktop PC's]
** PC 1: [http://ubuntustudio.org/ Ubuntu Studio] (GNU/Linux), PC2: Windows10/[http://ubuntustudio.org/ Ubuntu Studio] (gNU/Linux), PC3: Windows 7
** AMD Athlon II X3 435 (triple-core)
** 2.7gb RAM
** 300gb hard drive
** NVIDIA GeForce 9100
* 1x [http://www.dell.com/support/home/us/en/19/product-support/product/dell-3000cn/drivers Dell 3000cn Laser Printer]
** IP 192.168.9.229 port 9100
* 1x [http://support.hp.com/us-en/product/HP-Photosmart-C5200-All-in-One-Printer-series/3204462/model/3204463 HP Photosmart C5280 Scanner] - (it's actually an all-in-one, but the printer part isn't working)
** The scanner is connected to the adjacent PC. To scan a document, open the System Menu and select ''Graphics > Simple Scan''
* 1x [[Plotter]] HP Designjet 1050c plus
** Capable of up to 36 inch wide prints.
** Due to the cost of ink, designs should use colors instead of blacks.

</onlyinclude>

User:Anthony Mitchell

2017-04-27T10:27:12Z

Anthony Mitchell:

Simple Man.
Lifelong Wichita resident, student and maker.

Working on Doctorate of Computer Science, among many other things.

Current Projects at the MakerSpace:
*SciFi Movie Night
*Kung-Fu Movie Night
*Raspberry Pi-controlled Autonomous Car
*Chess Club
*???

Classes Taught at MakerSpace:
*Introduction to Linux
*Introduction to Arduino
*Introduction to Raspberry PI
*Introduction to Python
*Computer Literacy for Seniors

Contact Information

2017-04-27T10:08:33Z

Anthony Mitchell:

== Policy ==

Any active member of MakeICT may have their email forwarded from a makeict.org email address to an email address of their choice. In addition most modern email providers (such as [https://support.google.com/mail/answer/22377?hl=en gmail]) allow users to set their "from" or "reply-to" email address to a confirmed address of their choice.

All executive committee members are encouraged to use their makeict.org emails for all correspondence related to MakeICT. To set up email forwarding, email a request to vicepresident@makeict.org.

== Leadership Contacts==
=== Board of Directors ===
{| class="wikitable"
!Title
!Email
!Forwards to
|-
|Board of Directors
|directors@makeict.org
|[[Officers and at-large directors]]
|-
|President
|president@makeict.org
|[[User:Logan Pajunen|Logan Pajunen]]
|-
|Vice President
|vicepresident@makeict.org
|[[User:John Alexander|John Alexander]]
|-
|Secretary
|secretary@makeict.org
|[[User:Kip Landwehr|Kip Landwehr]]
|-
|Treasurer
|treasurer@makeict.org
|[[User:Tracy Hoover|Tracy Hoover]]
|-
|Director At Large
|barb@makeict.org
|[[User:Barbara Davis|Barbara Davis]]
|-
|Director At Large
|christian@makeict.org
|[[User:Christian Kindel|Christian Kindel]]
|-
|Director At Large
|curt@makeict.org
|[[User:Curt Gridley|Curt Gridley]]
|-
|Director At Large
|jameslancaster@makeict.org
|[[User:James Lancaster|James Lancaster]]
|-
|Immediate Past President
|dom@makeict.org
|[[User:Dominic Canare|Dominic Canare]]
|-
|}

=== Program Directors ===
{| class="wikitable"
!Title
!Email
!Forwards to
|-
|Makerspace Director
|tom@makeict.org
|[[User:Tom McGuire|Tom McGuire]]
|-
|Open Wichita Director
|seth@makeict.org
|[[User:Seth Etter|Seth Etter]]
|-
|devICT Director
|jacob@makeict.org
|[[User:Jacob Walker|Jacob Walker]]
|-
|Maker Academy Director
|seth@makeict.org
|[[User:Laura Scholl|Laura Scholl]]
|-
|Kansas Linux Fest Director
|joel@kansaslinuxfest.org
|[[User:Joel Baltazor|Joel Baltazor]]
|-
|}

=== Area Leads ===
{| class="wikitable"
!Title
!Email
!Forwards to
|-
|Area Leads
|leads@makeict.org
|[[Area Leads|all of the Area Leads]]
|-
|Art Gallery Lead
|susandewit@makeict.org
|[[User:Susan de Wit|Susan de Wit]]
|-
|Textiles Lead
|Malissa@makeict.org
|[[User:Malissa Long|Malissa Long]]
|-
|Ceramics Lead
|johncody@makeict.org
|[[User:John Cody|John Cody]]
|-
|Facility Lead
|lewis@makeict.org
|[[User:Matthew'Lewis'Warren|Matthew 'Lewis' Warren]]
|-
|Fab Lab Lead
|fablab@makeict.org
|[[User:Christian Kindel|Christian Kindel]]
|-
|Electronics Lead
|james.a.seymour@makeict.org
|[[User:James A Seymour|James Seymour]]
|-
|Metalshop Lead
|jeremiahburian@makeict.org
|[[User:JeremiahBurian|Jeremiah Burian]]
|-
|Printmaking/screen printing Lead
|tim.collins@makeict.org
|[[User:Tim Collins|Tim Collins]]
|-
|Retail/consignment Lead
|mikeb@makeict.org
|[[User:Mike Barushok|Mike Barushok]]
|-
|Woodshop Lead
|mikeh@makeict.org
|[[User:Mike Hutton|Mike Hutton]]
|-
|Jewelrymaking Lead
|david@makeict.org
|[[User:David Springs|David Springs]]
|-
|Information Technology Lead
|paulherrington@makeict.org
|[[User:Paul Herrington|Paul Herrington]]
|-
|Chief Security Officer
|mpogue@makeict.org
|[[User:Matthew Pogue|Matthew Pogue]]
|-
|}

User:Anthony Mitchell

2017-04-20T21:04:55Z

Anthony Mitchell: Created page with "Simple Man. Lifelong Wichita resident, student and maker. Working on Doctorate of Computer Science, among many other things. Current Projects at the MakerSpace: *SciFi..."