MakeICT Wiki - User contributions [en]

FabLab Area

2015-09-26T14:56:09Z

Bryan Barr: /* Classses */

{{needs-update|details=missing details and access policies}}

== General Information ==
MakeICT's FabLab is an open 200 sq ft area dedicated to fabrication and rapid prototyping. Here is where you can test ideas, and concepts before moving on to more expensive materials or processes. Or, simply enjoy the creative process and see what you can make. The FabLab currently houses 3D printers, foam cutter, and laser engraver/cutter. Per MakeICT policy, all machinery and tools require prior instruction and certification before use. We want all our members and guests to be safe, and the equipment kept in top condition so all can enjoy.

[[User:Bryan Barr|Bryan Barr]] is the Benevolent Dictator over the FabLab.

== Machine Access Policy ==
=== Laser Engraver/Cutter ===
* To use the Laser Engraver/Cutter you, must take the [[Laser Engraver/Cutter Basics Class]] (this takes affect 10/3/15)
:* Certification is under construction
:* List of Laser Engraver/Cutter approved users is listed below

=== 3D Printers ===
* To use the 3D Printers, you must take the [[Intro to 3D Printing Class]] (TBD)
:* Certification is under construction

=== Foam Cutter ===
* To use the Foam Cutter, you must take the [[Intro to CNC: A Foam Cutting Workshop]] (TBD)
:* Certification is under construction

== Classses ==
* [[Intro to CNC: a Foam Cutting Workshop]]
* [[Intro to 3D Printing]]
* [[Advanced 3D Printing and Modeling]]
* [[Laser Engraver/Cutter Basics Class]]

== Equipment List ==
<onlyinclude>{| class="wikitable sortable"
|-
! Picture !! What !! Manufacturer !! Model !! Power !! Status !! Expert !! How To
|-
| [[File:RostockBlack-V2-Front.jpg|200px]] || 3D Printer || SeeMeCNC || Rostock Max v2 || 110 || Working || [[User:Bryan Barr|Bryan Barr]] || [[http://wiki.mattercontrol.com/ MatterControl Wiki]]
|-
| [[File:3D-Printer.jpg|200px]] || 3D Printer || RepRap || || 110 || Working || [[User:James Lancaster|James Lancaster]] || [[RepRap Prusa Mendel 3D Printer|Information]]
|-
| [[File:Ultimaker II.jpeg|200px]] || 3D Printer || Ultimaker || Ultimaker II || 110 || Working || [[User:Tom McGuire|Tom McGuire]] || [[Ultimaker II|instructions]]
|-
| [[File:Foam-Cutter.jpg|200px]] || Foam Cutter || Tom McGuire || || 110 || Working || [[User:Tom McGuire|Tom McGuire]] || [[Foam Cutting Machine|Basic Use Guidelines]]
|-
| [[File:Laser_cutter.jpg|200px]] || Laser Cutter || Rabbit Laser || QX1290 || 230 || Working || [[User:Mike Doolittle|Mike Doolittle]] || [[Laser Cutting Machine|Laser Cutter Guidelines]]
|}</onlyinclude>

== Laser Cutter Approved Users ==
<onlyinclude>{| class="wikitable sortable"
|-
! Name !! Notes
|-
| Bryan Barr || FabLab BD
|-
| Mike Doolittle || Laser Cutter instructor
|-
| Jerry Carpenter ||
|-
| David Springs ||
|-
| William Davisson ||
|-
| Brad Cooley ||
|-
| Ivan Quiroz ||
|-
| Jonny Fosnight ||
|-
| John Alexanders ||
|-
| Stephen Reckers ||
|-
| Mike Hutton ||
|}</onlyinclude>

FabLab Area

2015-09-26T14:55:34Z

Bryan Barr: /* Laser Engraver/Cutter */

{{needs-update|details=missing details and access policies}}

== General Information ==
MakeICT's FabLab is an open 200 sq ft area dedicated to fabrication and rapid prototyping. Here is where you can test ideas, and concepts before moving on to more expensive materials or processes. Or, simply enjoy the creative process and see what you can make. The FabLab currently houses 3D printers, foam cutter, and laser engraver/cutter. Per MakeICT policy, all machinery and tools require prior instruction and certification before use. We want all our members and guests to be safe, and the equipment kept in top condition so all can enjoy.

[[User:Bryan Barr|Bryan Barr]] is the Benevolent Dictator over the FabLab.

== Machine Access Policy ==
=== Laser Engraver/Cutter ===
* To use the Laser Engraver/Cutter you, must take the [[Laser Engraver/Cutter Basics Class]] (this takes affect 10/3/15)
:* Certification is under construction
:* List of Laser Engraver/Cutter approved users is listed below

=== 3D Printers ===
* To use the 3D Printers, you must take the [[Intro to 3D Printing Class]] (TBD)
:* Certification is under construction

=== Foam Cutter ===
* To use the Foam Cutter, you must take the [[Intro to CNC: A Foam Cutting Workshop]] (TBD)
:* Certification is under construction

== Classses ==
* Intro to CNC: a Foam Cutting Workshop
* Intro to 3D Printing
* Advanced 3D Printing and Modeling
* [[Laser Cutter Basics Class]]

== Equipment List ==
<onlyinclude>{| class="wikitable sortable"
|-
! Picture !! What !! Manufacturer !! Model !! Power !! Status !! Expert !! How To
|-
| [[File:RostockBlack-V2-Front.jpg|200px]] || 3D Printer || SeeMeCNC || Rostock Max v2 || 110 || Working || [[User:Bryan Barr|Bryan Barr]] || [[http://wiki.mattercontrol.com/ MatterControl Wiki]]
|-
| [[File:3D-Printer.jpg|200px]] || 3D Printer || RepRap || || 110 || Working || [[User:James Lancaster|James Lancaster]] || [[RepRap Prusa Mendel 3D Printer|Information]]
|-
| [[File:Ultimaker II.jpeg|200px]] || 3D Printer || Ultimaker || Ultimaker II || 110 || Working || [[User:Tom McGuire|Tom McGuire]] || [[Ultimaker II|instructions]]
|-
| [[File:Foam-Cutter.jpg|200px]] || Foam Cutter || Tom McGuire || || 110 || Working || [[User:Tom McGuire|Tom McGuire]] || [[Foam Cutting Machine|Basic Use Guidelines]]
|-
| [[File:Laser_cutter.jpg|200px]] || Laser Cutter || Rabbit Laser || QX1290 || 230 || Working || [[User:Mike Doolittle|Mike Doolittle]] || [[Laser Cutting Machine|Laser Cutter Guidelines]]
|}</onlyinclude>

== Laser Cutter Approved Users ==
<onlyinclude>{| class="wikitable sortable"
|-
! Name !! Notes
|-
| Bryan Barr || FabLab BD
|-
| Mike Doolittle || Laser Cutter instructor
|-
| Jerry Carpenter ||
|-
| David Springs ||
|-
| William Davisson ||
|-
| Brad Cooley ||
|-
| Ivan Quiroz ||
|-
| Jonny Fosnight ||
|-
| John Alexanders ||
|-
| Stephen Reckers ||
|-
| Mike Hutton ||
|}</onlyinclude>

FabLab Area

2015-09-26T14:55:08Z

Bryan Barr: /* Machine Access Policy */

{{needs-update|details=missing details and access policies}}

== General Information ==
MakeICT's FabLab is an open 200 sq ft area dedicated to fabrication and rapid prototyping. Here is where you can test ideas, and concepts before moving on to more expensive materials or processes. Or, simply enjoy the creative process and see what you can make. The FabLab currently houses 3D printers, foam cutter, and laser engraver/cutter. Per MakeICT policy, all machinery and tools require prior instruction and certification before use. We want all our members and guests to be safe, and the equipment kept in top condition so all can enjoy.

[[User:Bryan Barr|Bryan Barr]] is the Benevolent Dictator over the FabLab.

== Machine Access Policy ==
=== Laser Engraver/Cutter ===
* To use the Laser Engraver/Cutter you, must take the [[Laser Cutter Basics Class]] (this takes affect 10/3/15)
:* Certification is under construction
:* List of Laser Engraver/Cutter approved users is listed below

=== 3D Printers ===
* To use the 3D Printers, you must take the [[Intro to 3D Printing Class]] (TBD)
:* Certification is under construction

=== Foam Cutter ===
* To use the Foam Cutter, you must take the [[Intro to CNC: A Foam Cutting Workshop]] (TBD)
:* Certification is under construction

== Classses ==
* Intro to CNC: a Foam Cutting Workshop
* Intro to 3D Printing
* Advanced 3D Printing and Modeling
* [[Laser Cutter Basics Class]]

== Equipment List ==
<onlyinclude>{| class="wikitable sortable"
|-
! Picture !! What !! Manufacturer !! Model !! Power !! Status !! Expert !! How To
|-
| [[File:RostockBlack-V2-Front.jpg|200px]] || 3D Printer || SeeMeCNC || Rostock Max v2 || 110 || Working || [[User:Bryan Barr|Bryan Barr]] || [[http://wiki.mattercontrol.com/ MatterControl Wiki]]
|-
| [[File:3D-Printer.jpg|200px]] || 3D Printer || RepRap || || 110 || Working || [[User:James Lancaster|James Lancaster]] || [[RepRap Prusa Mendel 3D Printer|Information]]
|-
| [[File:Ultimaker II.jpeg|200px]] || 3D Printer || Ultimaker || Ultimaker II || 110 || Working || [[User:Tom McGuire|Tom McGuire]] || [[Ultimaker II|instructions]]
|-
| [[File:Foam-Cutter.jpg|200px]] || Foam Cutter || Tom McGuire || || 110 || Working || [[User:Tom McGuire|Tom McGuire]] || [[Foam Cutting Machine|Basic Use Guidelines]]
|-
| [[File:Laser_cutter.jpg|200px]] || Laser Cutter || Rabbit Laser || QX1290 || 230 || Working || [[User:Mike Doolittle|Mike Doolittle]] || [[Laser Cutting Machine|Laser Cutter Guidelines]]
|}</onlyinclude>

== Laser Cutter Approved Users ==
<onlyinclude>{| class="wikitable sortable"
|-
! Name !! Notes
|-
| Bryan Barr || FabLab BD
|-
| Mike Doolittle || Laser Cutter instructor
|-
| Jerry Carpenter ||
|-
| David Springs ||
|-
| William Davisson ||
|-
| Brad Cooley ||
|-
| Ivan Quiroz ||
|-
| Jonny Fosnight ||
|-
| John Alexanders ||
|-
| Stephen Reckers ||
|-
| Mike Hutton ||
|}</onlyinclude>

FabLab Area

2015-09-26T14:54:30Z

Bryan Barr: /* Machine Access Policy */

{{needs-update|details=missing details and access policies}}

== General Information ==
MakeICT's FabLab is an open 200 sq ft area dedicated to fabrication and rapid prototyping. Here is where you can test ideas, and concepts before moving on to more expensive materials or processes. Or, simply enjoy the creative process and see what you can make. The FabLab currently houses 3D printers, foam cutter, and laser engraver/cutter. Per MakeICT policy, all machinery and tools require prior instruction and certification before use. We want all our members and guests to be safe, and the equipment kept in top condition so all can enjoy.

[[User:Bryan Barr|Bryan Barr]] is the Benevolent Dictator over the FabLab.

== Machine Access Policy ==
=== Laser Engraver/Cutter ===
* To use the Laser Engraver/Cutter you, must take the [[Laser Cutter Basics Class]] (this takes affect 10/3/15)
:* Certification is under construction
:* List of Laser Engraver/Cutter approved users is listed below

=== 3D Printers ===
* To use the 3D Printers, you must take the [[Intro to 3D Printing Class]] (TBD)
:* Certification is under construction

=== Foam Cutter ===
* To use the Foam Cutter, you must take the [[Intro to CNC: A Foam Cutting Class]] (TBD)

== Classses ==
* Intro to CNC: a Foam Cutting Workshop
* Intro to 3D Printing
* Advanced 3D Printing and Modeling
* [[Laser Cutter Basics Class]]

== Equipment List ==
<onlyinclude>{| class="wikitable sortable"
|-
! Picture !! What !! Manufacturer !! Model !! Power !! Status !! Expert !! How To
|-
| [[File:RostockBlack-V2-Front.jpg|200px]] || 3D Printer || SeeMeCNC || Rostock Max v2 || 110 || Working || [[User:Bryan Barr|Bryan Barr]] || [[http://wiki.mattercontrol.com/ MatterControl Wiki]]
|-
| [[File:3D-Printer.jpg|200px]] || 3D Printer || RepRap || || 110 || Working || [[User:James Lancaster|James Lancaster]] || [[RepRap Prusa Mendel 3D Printer|Information]]
|-
| [[File:Ultimaker II.jpeg|200px]] || 3D Printer || Ultimaker || Ultimaker II || 110 || Working || [[User:Tom McGuire|Tom McGuire]] || [[Ultimaker II|instructions]]
|-
| [[File:Foam-Cutter.jpg|200px]] || Foam Cutter || Tom McGuire || || 110 || Working || [[User:Tom McGuire|Tom McGuire]] || [[Foam Cutting Machine|Basic Use Guidelines]]
|-
| [[File:Laser_cutter.jpg|200px]] || Laser Cutter || Rabbit Laser || QX1290 || 230 || Working || [[User:Mike Doolittle|Mike Doolittle]] || [[Laser Cutting Machine|Laser Cutter Guidelines]]
|}</onlyinclude>

== Laser Cutter Approved Users ==
<onlyinclude>{| class="wikitable sortable"
|-
! Name !! Notes
|-
| Bryan Barr || FabLab BD
|-
| Mike Doolittle || Laser Cutter instructor
|-
| Jerry Carpenter ||
|-
| David Springs ||
|-
| William Davisson ||
|-
| Brad Cooley ||
|-
| Ivan Quiroz ||
|-
| Jonny Fosnight ||
|-
| John Alexanders ||
|-
| Stephen Reckers ||
|-
| Mike Hutton ||
|}</onlyinclude>

FabLab Area

2015-09-26T14:54:03Z

Bryan Barr: /* Machine Access Policy */

{{needs-update|details=missing details and access policies}}

== General Information ==
MakeICT's FabLab is an open 200 sq ft area dedicated to fabrication and rapid prototyping. Here is where you can test ideas, and concepts before moving on to more expensive materials or processes. Or, simply enjoy the creative process and see what you can make. The FabLab currently houses 3D printers, foam cutter, and laser engraver/cutter. Per MakeICT policy, all machinery and tools require prior instruction and certification before use. We want all our members and guests to be safe, and the equipment kept in top condition so all can enjoy.

[[User:Bryan Barr|Bryan Barr]] is the Benevolent Dictator over the FabLab.

== Machine Access Policy ==
=== Laser Engraver/Cutter ===
* To use the Laser Engraver/Cutter you, must take the [[Laser Cutter Basics Class]] (this takes affect 10/3/15)
:* Certification is under construction
:* List of Laser Engraver/Cutter approved users is listed below

=== 3D Printers ===
* To use the 3D Printers, you must take the [[Intro to 3D Printing Class]] (TBD)
:* Certification is under construction

=== Foam Cutter ===
* To use the Foam Cutter, you must take the [[Intro to CNC: Foam Cutter Basic Class]] (TBD)

== Classses ==
* Intro to CNC: a Foam Cutting Workshop
* Intro to 3D Printing
* Advanced 3D Printing and Modeling
* [[Laser Cutter Basics Class]]

== Equipment List ==
<onlyinclude>{| class="wikitable sortable"
|-
! Picture !! What !! Manufacturer !! Model !! Power !! Status !! Expert !! How To
|-
| [[File:RostockBlack-V2-Front.jpg|200px]] || 3D Printer || SeeMeCNC || Rostock Max v2 || 110 || Working || [[User:Bryan Barr|Bryan Barr]] || [[http://wiki.mattercontrol.com/ MatterControl Wiki]]
|-
| [[File:3D-Printer.jpg|200px]] || 3D Printer || RepRap || || 110 || Working || [[User:James Lancaster|James Lancaster]] || [[RepRap Prusa Mendel 3D Printer|Information]]
|-
| [[File:Ultimaker II.jpeg|200px]] || 3D Printer || Ultimaker || Ultimaker II || 110 || Working || [[User:Tom McGuire|Tom McGuire]] || [[Ultimaker II|instructions]]
|-
| [[File:Foam-Cutter.jpg|200px]] || Foam Cutter || Tom McGuire || || 110 || Working || [[User:Tom McGuire|Tom McGuire]] || [[Foam Cutting Machine|Basic Use Guidelines]]
|-
| [[File:Laser_cutter.jpg|200px]] || Laser Cutter || Rabbit Laser || QX1290 || 230 || Working || [[User:Mike Doolittle|Mike Doolittle]] || [[Laser Cutting Machine|Laser Cutter Guidelines]]
|}</onlyinclude>

== Laser Cutter Approved Users ==
<onlyinclude>{| class="wikitable sortable"
|-
! Name !! Notes
|-
| Bryan Barr || FabLab BD
|-
| Mike Doolittle || Laser Cutter instructor
|-
| Jerry Carpenter ||
|-
| David Springs ||
|-
| William Davisson ||
|-
| Brad Cooley ||
|-
| Ivan Quiroz ||
|-
| Jonny Fosnight ||
|-
| John Alexanders ||
|-
| Stephen Reckers ||
|-
| Mike Hutton ||
|}</onlyinclude>

FabLab Area

2015-09-26T14:53:05Z

Bryan Barr: /* Machine Access Policy */

{{needs-update|details=missing details and access policies}}

== General Information ==
MakeICT's FabLab is an open 200 sq ft area dedicated to fabrication and rapid prototyping. Here is where you can test ideas, and concepts before moving on to more expensive materials or processes. Or, simply enjoy the creative process and see what you can make. The FabLab currently houses 3D printers, foam cutter, and laser engraver/cutter. Per MakeICT policy, all machinery and tools require prior instruction and certification before use. We want all our members and guests to be safe, and the equipment kept in top condition so all can enjoy.

[[User:Bryan Barr|Bryan Barr]] is the Benevolent Dictator over the FabLab.

== Machine Access Policy ==
=== Laser Engraver/Cutter ===
* To use the Laser Engraver/Cutter you, must take the [[Laser Cutter Basics Class]] (this takes affect 10/3/15)
:* Certification is under construction
:* List of Laser Engraver/Cutter approved users is listed below

=== 3D Printers ===
* To use the 3D Printers, you must take the [[3D Printing Basics Class]] (TBD)
:* Certification is under construction

=== Foam Cutter ===
* To use the Foam Cutter, you must take the [[Foam Cutter Basic Class]] (TBD)

== Classses ==
* Intro to CNC: a Foam Cutting Workshop
* Intro to 3D Printing
* Advanced 3D Printing and Modeling
* [[Laser Cutter Basics Class]]

== Equipment List ==
<onlyinclude>{| class="wikitable sortable"
|-
! Picture !! What !! Manufacturer !! Model !! Power !! Status !! Expert !! How To
|-
| [[File:RostockBlack-V2-Front.jpg|200px]] || 3D Printer || SeeMeCNC || Rostock Max v2 || 110 || Working || [[User:Bryan Barr|Bryan Barr]] || [[http://wiki.mattercontrol.com/ MatterControl Wiki]]
|-
| [[File:3D-Printer.jpg|200px]] || 3D Printer || RepRap || || 110 || Working || [[User:James Lancaster|James Lancaster]] || [[RepRap Prusa Mendel 3D Printer|Information]]
|-
| [[File:Ultimaker II.jpeg|200px]] || 3D Printer || Ultimaker || Ultimaker II || 110 || Working || [[User:Tom McGuire|Tom McGuire]] || [[Ultimaker II|instructions]]
|-
| [[File:Foam-Cutter.jpg|200px]] || Foam Cutter || Tom McGuire || || 110 || Working || [[User:Tom McGuire|Tom McGuire]] || [[Foam Cutting Machine|Basic Use Guidelines]]
|-
| [[File:Laser_cutter.jpg|200px]] || Laser Cutter || Rabbit Laser || QX1290 || 230 || Working || [[User:Mike Doolittle|Mike Doolittle]] || [[Laser Cutting Machine|Laser Cutter Guidelines]]
|}</onlyinclude>

== Laser Cutter Approved Users ==
<onlyinclude>{| class="wikitable sortable"
|-
! Name !! Notes
|-
| Bryan Barr || FabLab BD
|-
| Mike Doolittle || Laser Cutter instructor
|-
| Jerry Carpenter ||
|-
| David Springs ||
|-
| William Davisson ||
|-
| Brad Cooley ||
|-
| Ivan Quiroz ||
|-
| Jonny Fosnight ||
|-
| John Alexanders ||
|-
| Stephen Reckers ||
|-
| Mike Hutton ||
|}</onlyinclude>

FabLab Area

2015-09-26T14:44:51Z

Bryan Barr: /* General Information */

{{needs-update|details=missing details and access policies}}

== General Information ==
MakeICT's FabLab is an open 200 sq ft area dedicated to fabrication and rapid prototyping. Here is where you can test ideas, and concepts before moving on to more expensive materials or processes. Or, simply enjoy the creative process and see what you can make. The FabLab currently houses 3D printers, foam cutter, and laser engraver/cutter. Per MakeICT policy, all machinery and tools require prior instruction and certification before use. We want all our members and guests to be safe, and the equipment kept in top condition so all can enjoy.

[[User:Bryan Barr|Bryan Barr]] is the Benevolent Dictator over the FabLab.

== Machine Access Policy ==
* To use the Laser Cutter you must take the [[Laser Cutter Basics Class]] (this takes affect 10/3/15)
* Certification is under construction
* List of Laser Cutter approved users is listed below

== Classses ==
* Intro to CNC: a Foam Cutting Workshop
* Intro to 3D Printing
* Advanced 3D Printing and Modeling
* [[Laser Cutter Basics Class]]

== Equipment List ==
<onlyinclude>{| class="wikitable sortable"
|-
! Picture !! What !! Manufacturer !! Model !! Power !! Status !! Expert !! How To
|-
| [[File:RostockBlack-V2-Front.jpg|200px]] || 3D Printer || SeeMeCNC || Rostock Max v2 || 110 || Working || [[User:Bryan Barr|Bryan Barr]] || [[http://wiki.mattercontrol.com/ MatterControl Wiki]]
|-
| [[File:3D-Printer.jpg|200px]] || 3D Printer || RepRap || || 110 || Working || [[User:James Lancaster|James Lancaster]] || [[RepRap Prusa Mendel 3D Printer|Information]]
|-
| [[File:Ultimaker II.jpeg|200px]] || 3D Printer || Ultimaker || Ultimaker II || 110 || Working || [[User:Tom McGuire|Tom McGuire]] || [[Ultimaker II|instructions]]
|-
| [[File:Foam-Cutter.jpg|200px]] || Foam Cutter || Tom McGuire || || 110 || Working || [[User:Tom McGuire|Tom McGuire]] || [[Foam Cutting Machine|Basic Use Guidelines]]
|-
| [[File:Laser_cutter.jpg|200px]] || Laser Cutter || Rabbit Laser || QX1290 || 230 || Working || [[User:Mike Doolittle|Mike Doolittle]] || [[Laser Cutting Machine|Laser Cutter Guidelines]]
|}</onlyinclude>

== Laser Cutter Approved Users ==
<onlyinclude>{| class="wikitable sortable"
|-
! Name !! Notes
|-
| Bryan Barr || FabLab BD
|-
| Mike Doolittle || Laser Cutter instructor
|-
| Jerry Carpenter ||
|-
| David Springs ||
|-
| William Davisson ||
|-
| Brad Cooley ||
|-
| Ivan Quiroz ||
|-
| Jonny Fosnight ||
|-
| John Alexanders ||
|-
| Stephen Reckers ||
|-
| Mike Hutton ||
|}</onlyinclude>

FabLab Area

2015-09-26T14:36:02Z

Bryan Barr: /* Equipment List */

{{needs-update|details=missing details and access policies}}

== General Information ==
MakeICT's FabLab is an open 200 sq ft area dedicated to fabrication.

[[User:Bryan Barr|Bryan Barr]] is the Benevolent Dictator over the FabLab.

== Machine Access Policy ==
* To use the Laser Cutter you must take the [[Laser Cutter Basics Class]] (this takes affect 10/3/15)
* Certification is under construction
* List of Laser Cutter approved users is listed below

== Classses ==
* Intro to CNC: a Foam Cutting Workshop
* Intro to 3D Printing
* Advanced 3D Printing and Modeling
* [[Laser Cutter Basics Class]]

== Equipment List ==
<onlyinclude>{| class="wikitable sortable"
|-
! Picture !! What !! Manufacturer !! Model !! Power !! Status !! Expert !! How To
|-
| [[File:RostockBlack-V2-Front.jpg|200px]] || 3D Printer || SeeMeCNC || Rostock Max v2 || 110 || Working || [[User:Bryan Barr|Bryan Barr]] || [[http://wiki.mattercontrol.com/ MatterControl Wiki]]
|-
| [[File:3D-Printer.jpg|200px]] || 3D Printer || RepRap || || 110 || Working || [[User:James Lancaster|James Lancaster]] || [[RepRap Prusa Mendel 3D Printer|Information]]
|-
| [[File:Ultimaker II.jpeg|200px]] || 3D Printer || Ultimaker || Ultimaker II || 110 || Working || [[User:Tom McGuire|Tom McGuire]] || [[Ultimaker II|instructions]]
|-
| [[File:Foam-Cutter.jpg|200px]] || Foam Cutter || Tom McGuire || || 110 || Working || [[User:Tom McGuire|Tom McGuire]] || [[Foam Cutting Machine|Basic Use Guidelines]]
|-
| [[File:Laser_cutter.jpg|200px]] || Laser Cutter || Rabbit Laser || QX1290 || 230 || Working || [[User:Mike Doolittle|Mike Doolittle]] || [[Laser Cutting Machine|Laser Cutter Guidelines]]
|}</onlyinclude>

== Laser Cutter Approved Users ==
<onlyinclude>{| class="wikitable sortable"
|-
! Name !! Notes
|-
| Bryan Barr || FabLab BD
|-
| Mike Doolittle || Laser Cutter instructor
|-
| Jerry Carpenter ||
|-
| David Springs ||
|-
| William Davisson ||
|-
| Brad Cooley ||
|-
| Ivan Quiroz ||
|-
| Jonny Fosnight ||
|-
| John Alexanders ||
|-
| Stephen Reckers ||
|-
| Mike Hutton ||
|}</onlyinclude>

FabLab Area

2015-09-26T14:35:22Z

Bryan Barr: /* Equipment List */

{{needs-update|details=missing details and access policies}}

== General Information ==
MakeICT's FabLab is an open 200 sq ft area dedicated to fabrication.

[[User:Bryan Barr|Bryan Barr]] is the Benevolent Dictator over the FabLab.

== Machine Access Policy ==
* To use the Laser Cutter you must take the [[Laser Cutter Basics Class]] (this takes affect 10/3/15)
* Certification is under construction
* List of Laser Cutter approved users is listed below

== Classses ==
* Intro to CNC: a Foam Cutting Workshop
* Intro to 3D Printing
* Advanced 3D Printing and Modeling
* [[Laser Cutter Basics Class]]

== Equipment List ==
<onlyinclude>{| class="wikitable sortable"
|-
! Picture !! What !! Manufacturer !! Model !! Power !! Status !! Expert !! How To
|-
| [[File:RostockBlack-V2-Front.jpg|200px]] || 3D Printer || SeeMeCNC || Rostock Max v2 || 110 || Working || [[User:Bryan Barr|Bryan Barr]] || [[http://wiki.mattercontrol.com/ |MatterControl Wiki]]
|-
| [[File:3D-Printer.jpg|200px]] || 3D Printer || RepRap || || 110 || Working || [[User:James Lancaster|James Lancaster]] || [[RepRap Prusa Mendel 3D Printer|Information]]
|-
| [[File:Ultimaker II.jpeg|200px]] || 3D Printer || Ultimaker || Ultimaker II || 110 || Working || [[User:Tom McGuire|Tom McGuire]] || [[Ultimaker II|instructions]]
|-
| [[File:Foam-Cutter.jpg|200px]] || Foam Cutter || Tom McGuire || || 110 || Working || [[User:Tom McGuire|Tom McGuire]] || [[Foam Cutting Machine|Basic Use Guidelines]]
|-
| [[File:Laser_cutter.jpg|200px]] || Laser Cutter || Rabbit Laser || QX1290 || 230 || Working || [[User:Mike Doolittle|Mike Doolittle]] || [[Laser Cutting Machine|Laser Cutter Guidelines]]
|}</onlyinclude>

== Laser Cutter Approved Users ==
<onlyinclude>{| class="wikitable sortable"
|-
! Name !! Notes
|-
| Bryan Barr || FabLab BD
|-
| Mike Doolittle || Laser Cutter instructor
|-
| Jerry Carpenter ||
|-
| David Springs ||
|-
| William Davisson ||
|-
| Brad Cooley ||
|-
| Ivan Quiroz ||
|-
| Jonny Fosnight ||
|-
| John Alexanders ||
|-
| Stephen Reckers ||
|-
| Mike Hutton ||
|}</onlyinclude>

SeeMeCNC Rostock Max v2

2015-09-26T14:34:11Z

Bryan Barr: Created page with "[http://wiki.mattercontrol.com/ MatterControl Wiki]]"

[http://wiki.mattercontrol.com/ MatterControl Wiki]]

FabLab Area

2015-09-26T14:27:17Z

Bryan Barr: /* Equipment List */

{{needs-update|details=missing details and access policies}}

== General Information ==
MakeICT's FabLab is an open 200 sq ft area dedicated to fabrication.

[[User:Bryan Barr|Bryan Barr]] is the Benevolent Dictator over the FabLab.

== Machine Access Policy ==
* To use the Laser Cutter you must take the [[Laser Cutter Basics Class]] (this takes affect 10/3/15)
* Certification is under construction
* List of Laser Cutter approved users is listed below

== Classses ==
* Intro to CNC: a Foam Cutting Workshop
* Intro to 3D Printing
* Advanced 3D Printing and Modeling
* [[Laser Cutter Basics Class]]

== Equipment List ==
<onlyinclude>{| class="wikitable sortable"
|-
! Picture !! What !! Manufacturer !! Model !! Power !! Status !! Expert !! How To
|-
| [[File:RostockBlack-V2-Front.jpg|200px]] || 3D Printer || SeeMeCNC || Rostock Max v2 || 110 || Working || [[User:Bryan Barr|Bryan Barr]] || [[SeeMeCNC Rostock Max v2|Information]]
|-
| [[File:3D-Printer.jpg|200px]] || 3D Printer || RepRap || || 110 || Working || [[User:James Lancaster|James Lancaster]] || [[RepRap Prusa Mendel 3D Printer|Information]]
|-
| [[File:Ultimaker II.jpeg|200px]] || 3D Printer || Ultimaker || Ultimaker II || 110 || Working || [[User:Tom McGuire|Tom McGuire]] || [[Ultimaker II|instructions]]
|-
| [[File:Foam-Cutter.jpg|200px]] || Foam Cutter || Tom McGuire || || 110 || Working || [[User:Tom McGuire|Tom McGuire]] || [[Foam Cutting Machine|Basic Use Guidelines]]
|-
| [[File:Laser_cutter.jpg|200px]] || Laser Cutter || Rabbit Laser || QX1290 || 230 || Working || [[User:Mike Doolittle|Mike Doolittle]] || [[Laser Cutting Machine|Laser Cutter Guidelines]]
|}</onlyinclude>

== Laser Cutter Approved Users ==
<onlyinclude>{| class="wikitable sortable"
|-
! Name !! Notes
|-
| Bryan Barr || FabLab BD
|-
| Mike Doolittle || Laser Cutter instructor
|-
| Jerry Carpenter ||
|-
| David Springs ||
|-
| William Davisson ||
|-
| Brad Cooley ||
|-
| Ivan Quiroz ||
|-
| Jonny Fosnight ||
|-
| John Alexanders ||
|-
| Stephen Reckers ||
|-
| Mike Hutton ||
|}</onlyinclude>

File:RostockBlack-V2-Front.jpg

2015-09-26T14:13:08Z

Bryan Barr: