Difference between revisions of "Slicer Profiles"

Latest revision as of 12:44, 16 March 2024

Below are the default slicer profiles for the 3D printers at MakeICT.

To use these files:

Download PrusaSlicer
- From the section labeled "Drivers & Apps"
Run the installer
- Select only the first option, unless you want to install other component
Download latest config bundle here: PrusaSlicer_config_bundle_2_5_ini
File -> Import -> Import Config Bundle
Select downloaded config file
Check back here for updates

@@ Line 1: / Line 1: @@
-Below are the default slicer profiles for the 3d printers at MakeICT.
+Below are the default slicer profiles for the 3D printers at MakeICT.
-== Slic3r ==
+==PrusaSlicer==
 To use these files:
-#[https://github.com/prusa3d/Slic3r/releases Download Slic3r Prusa Edition]
-#Run Slic3r
+#[https://help.prusa3d.com/downloads Download PrusaSlicer]
-#Download the current config bundle on this page
+#*From the section labeled "Drivers & Apps"
-#File -> Load Config Bundle
+#Run the installer
+#*Select only the first option, unless you want to install other component
+#Download latest config bundle here: [https://drive.google.com/file/d/1QsHgDnYFBu3vL97Z7pfoO392PhKbeA8K/view?usp=drive_link PrusaSlicer_config_bundle_2_5_ini]
+#File -> Import -> Import Config Bundle
 #Select downloaded config file
 #Check back here for updates
-=== Current ===
-*Download file: [https://drive.google.com/open?id=19IaIPBA8IXpZhsH5y__BsfXCHexf_7VI 2018-12-20_MakeICT_Slic3r_config_bundle.ini]
-=== Vendor Profiles ===
-You can also install the vendor profiles so that your settings will be updated automatically. Instructions pending.