Difference between revisions of "Classrooms"

From MakeICT Wiki
Jump to navigationJump to search
m (Brad Cozine moved page Classroom to Classrooms)
 
(25 intermediate revisions by 5 users not shown)
Line 1: Line 1:
−
MakeICT's classroom is a 750 sq ft area for workshops/classes, events, and shared workspace. It will provide a modern learning environment with all the tools needed by an instructor or student for teaching or learning.
+
MakeICT's classrooms are 3 950 sq ft area for workshops/classes, events, and shared workspace. They will provide a modern learning environment with all the tools needed by an instructor or student for teaching or learning.
  
−
== Remodel ==
+
==Access Policy==
−
There are a few improvements planned for the classroom:
 
−
*Hallway wall - to keep the classroom isolated during classes.
 
−
*Carpet, drop ceiling, and west wall - to make the classroom modern and clean
 
−
*A/V system - so that it is plug'n'play for instructors no matter what equipment they have or use.
 
−
*PC Lab - Midrange workstations good for graphics and computation more than the laptops can handle
 
−
 
 
−
The first two items are happening right now, so there may be some construction going on at various times. We will attempt to keep out of the way and work around classes, but we apologize in advance for any inconvenience.
 
−
 
 
−
== Access Policy ==
 
 
===Classroom===
 
===Classroom===
 
The classroom is reserved for workshops and classes according to the [http://makeict.org/calendar calendar]. It can also be reserved by members following this policy:
 
The classroom is reserved for workshops and classes according to the [http://makeict.org/calendar calendar]. It can also be reserved by members following this policy:
Line 17: Line 8:
 
Fill out the [http://makeict.org/reservations/ reservation form] to reserve the classroom for private meetings/events.
 
Fill out the [http://makeict.org/reservations/ reservation form] to reserve the classroom for private meetings/events.
  
−
During times when it hasn't been reserved, it shall be considered a shared workspace.
+
During times when it hasn't been reserved, they shall be considered a shared workspace.
  
 
===Laptops===
 
===Laptops===
 
Members using the laptops agree to return them to the proper shelf and plug them in when finished, and keep them out of dirty and dusty areas such as the metal shop, wood shop, and ceramics room. The laptops are not to be removed from the Makerspace.  To protect your personal information, it is strongly recommended to only access the internet from an Incognito window, and properly log out of all websites when finished browsing.
 
Members using the laptops agree to return them to the proper shelf and plug them in when finished, and keep them out of dirty and dusty areas such as the metal shop, wood shop, and ceramics room. The laptops are not to be removed from the Makerspace.  To protect your personal information, it is strongly recommended to only access the internet from an Incognito window, and properly log out of all websites when finished browsing.
  
−
===Software Installed===
+
The laptops are stored in the [[ERP]]
 +
 
 +
===Software Wanted to be installed on new images===
 
{| class="wikitable sortable"
 
{| class="wikitable sortable"
 
|-
 
|-
 
!Software
 
!Software
−
!Linux
+
!Description
−
!Windows
+
!Link
 +
!License
 
|-
 
|-
−
| Cura
+
|Blender
−
|
+
|3D creation suite: modeling, rigging, animation, rendering, etc.
−
|
+
|[https://blender.org]
 +
|GPL
 
|-
 
|-
−
| Blender
+
|Gimp
−
|
+
|Raster graphics editor used for image manipulation and editing, free-form drawing, etc.
−
|
+
|[https://www.gimp.org/]
 +
|GPL
 
|-
 
|-
−
| Gimp
+
|Inkscape
−
|  
+
|Vector graphics editor used to create and modify vector images.
−
|
+
|[https://inkscape.org/en/]
 +
|GPL 2
 
|-
 
|-
−
| Inkscape
+
|Lightburn
 +
|Layout, editing, and control software for laser cutters.
 
|
 
|
 
|
 
|
 
|-
 
|-
−
| EagleCAD
+
|KiCAD
−
|
+
|Software suite for design of schematics for electronic circuits and their conversion to PCB designs.
−
|
+
|[https://www.kicad.org]
 +
|GPL 3
 
|-
 
|-
−
| KiCAD
+
|Arduino
−
|
+
|IDE used to write and upload programs to Arduino compatible boards.
−
|
+
|[https://www.arduino.cc/]
 +
|GPL
 
|-
 
|-
−
| Arduino
+
|VScode
 +
|Source-code editor that can be used with a variety of programming languages
 
|
 
|
 
|
 
|
 
|-
 
|-
−
| Bitmap to Component Converter
+
|Eclipse IDE
−
|
+
|Integrated development environment (IDE) used in computer programming
−
|
+
|[http://www.eclipse.org/]
 +
|EPL
 
|-
 
|-
−
| PCB Calculator
+
|NotePad ++
−
|
+
|A free, open source code editor and Notepad replacement that supports several languages.
−
|
+
|[https://notepad-plus-plus.org/]
 +
|GPL
 
|-
 
|-
−
| Slic3r
+
|Firefox
−
|
+
|Free and open-source web browser backed by Mozilla, a non-profit dedicated to internet health and privacy.
−
|
+
|[https://www.mozilla.org/en-US/firefox/]
 +
|MPL 2.0
 
|-
 
|-
−
| Laser Cutter
+
|Chrome
 +
|A cross-platform web browser developed by Google.
 
|
 
|
 
|
 
|
 
|-
 
|-
−
| Fusion 360
+
|PrusaSlicer
−
|
+
|Open source slicer for FDM and SLA 3D printing.
−
|
+
|[http://slic3r.org/]
 +
|GNU AGPL V3
 
|-
 
|-
−
| DraftSight
+
|Fusion 360
 +
|A cloud-based 3D modeling, CAD, CAM, CAE, and PCB software platform for product design and manufacturing.
 
|
 
|
 
|
 
|
 
|-
 
|-
−
| Visual Studio
+
|FreeCAD
−
|
+
|An open-source parametric 3D modeler made primarily to design real-life objects of any size.
−
|
+
|[https://www.freecadweb.org/]
−
|}
+
|LGPL 2.1
−
 
 
−
===Software Wanted to be installed on new images===
 
−
{| class="wikitable sortable"
 
 
|-
 
|-
−
!Software
+
|OpenSCAD
−
!Linux
+
|A free software application for creating solid 3D CAD objects using a script-only interface.
−
!Windows
+
|[http://www.openscad.org/]
−
!Link
+
|GPL2
−
!License
 
 
|-
 
|-
−
| Cura
+
|7zip
−
| X
+
|Free and open-source file archiver.
−
| X
+
|[http://www.7-zip.org]
−
| [https://ultimaker.com/en/products/cura-software]
+
|GNU LGPL
−
| GNU AGPL V3
 
 
|-
 
|-
−
| Blender
+
|Python
−
| X
+
|Python is an interpreted high-level general-purpose programming language.
−
| X
+
|[http://www.python.org]
−
| [https://blender.org]
+
|PSFL (GPL compatible)
−
| GPL
 
 
|-
 
|-
−
| Gimp
+
|Putty
−
| X
+
|Free and open-source terminal emulator, serial console and network file transfer application.
−
| X
+
|[http://www.putty.org]
−
| [https://www.gimp.org/]
+
|
−
| GPL
 
 
|-
 
|-
−
| Inkscape
+
|LibreOffice
−
| X
+
|Free and open-source office productivity software suite.
−
| X
+
|[https://www.libreoffice.org/]
−
| [https://inkscape.org/en/]
+
|MPL 2.0
−
| GPL 2
 
 
|-
 
|-
−
| KiCAD
+
|Git
−
| X
+
|Source Control
−
| X
+
|[https://git-scm.com/]
−
| [http://kicad-pcb.org/]
+
|GNU GPL 2
−
| GPL 3
 
 
|-
 
|-
−
| Arduino
+
|Audacity-Wait
−
| X
+
|Free and open-source digital audio editor and recording application software.
−
| X
+
|[http://www.audacityteam.org/]
−
| [https://www.arduino.cc/]
+
|GNU GPL 2
−
| GPL
 
 
|-
 
|-
−
| Bitmap to Component Converter
+
|VideoLan Client (vlc)
−
|
+
|Free and open-source, portable, cross-platform media player software and streaming media server.
−
|
+
|[https://videolan.org/vlc/]
−
|
+
|LGPL 2.1
−
|
 
−
|-
 
−
| PCB Calculator
 
−
|
 
−
|
 
−
|
 
−
|
 
 
|-
 
|-
−
| Slic3r
+
|Rosegarden
−
|
+
|Free software digital audio workstation program developed for Linux with ALSA and Qt4.
−
|
+
|[http://www.rosegardenmusic.com/]
−
|
+
|GPL 2
−
|
 
 
|-
 
|-
−
| Laser Cut Demo
+
|Mplayer
−
|
+
|Free and open-source media player software application.
−
|
+
|[http://www.mplayerhq.hu]
−
|
+
|GPL 2
−
|
 
 
|-
 
|-
−
| Fusion 360
+
|SheetCam
−
|
+
|SheetCam is a low cost but feature packed CAM package. SheetCam is suitable for milling, routing, plasma, waterjet, laser and oxy-fuel cutting.
−
|
+
|[https://www.sheetcam.com/]
−
|
 
 
|
 
|
 
|-
 
|-
−
| Eclipse IDE
+
|Kstars
−
|X
+
|Freely licensed planetarium program using the KDE Platform.
−
|X
+
|[https://edu.kde.org/kstars/]
−
| [http://www.eclipse.org/]
+
|GPL 2
−
|EPL
 
 
|-
 
|-
−
| Ninja IDE
+
|Stellarium
−
|X
+
|Free and open-source planetarium.
−
|X
+
|[http://stellarium.org/]
−
| [http://www.ninja-ide.org/]
+
|GPL 2+
−
|GPL v3
 
 
|-
 
|-
−
| NotePad ++
+
|Siril
−
|X
+
|Software application for astrophotography, which allows pre-processing and processing of images from any type of camera.
−
|X
+
|[https://free-astro.org/index.php/Siril]
−
| [https://notepad-plus-plus.org/]
+
|GPL 3
−
|GPL
 
 
|-
 
|-
 
|}
 
|}
  
−
== Equipment List ==
+
==Equipment List==
 
<onlyinclude>
 
<onlyinclude>
−
* 1x [http://www.optomausa.com/projectordetails.aspx?PTypeDB=Business&PC=EH500 Optoma EH500 DLP Projector]
+
 
−
** Full HD 1080p
+
*1x [http://www.optomausa.com/projectordetails.aspx?PTypeDB=Business&PC=EH500 Optoma EH500 DLP Projector]
−
** 4700 Lumens
+
**Full HD 1080p
−
** HDMI, DisplayPort, 2xVGA
+
**4700 Lumens
−
* 15x [http://support.toshiba.com/support/modelHome?freeText=1200009402 Toshiba S55T-B5152 Laptops]
+
**HDMI, DisplayPort, 2xVGA
−
** Dual-boot Debian Stretch (GNU/Linux) / Windows 10
+
*15x [http://support.toshiba.com/support/modelHome?freeText=1200009402 Toshiba S55T-B5152 Laptops]
−
** Intel i5
+
**Dual-boot Debian Stretch (GNU/Linux) / Windows 10
−
** 4gb RAM
+
**Intel i5
−
** 500gb hard drive
+
**4gb RAM
−
** Intel HD Graphics + 1920x1080 Touchscreen display
+
**500gb hard drive
−
** SD card reader
+
**Intel HD Graphics + 1920x1080 Touchscreen display
−
* 3x [http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c01926406 HP Pro 3005MT Internet-connected desktop PC's]
+
**SD card reader
−
** PC 1: [http://ubuntustudio.org/ Ubuntu Studio] (GNU/Linux), PC2: Windows10/[http://ubuntustudio.org/ Ubuntu Studio] (gNU/Linux),  PC3: Windows 7
+
*3x [http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c01926406 HP Pro 3005MT Internet-connected desktop PC's]
−
** AMD Athlon II X3 435 (triple-core)
+
**PC 1: [http://ubuntustudio.org/ Ubuntu Studio] (GNU/Linux), PC2: Windows10/[http://ubuntustudio.org/ Ubuntu Studio] (gNU/Linux),  PC3: Windows 7
−
** 2.7gb RAM
+
**AMD Athlon II X3 435 (triple-core)
−
** 300gb hard drive
+
**2.7gb RAM
−
** NVIDIA GeForce 9100
+
**300gb hard drive
−
* 1x [http://www.dell.com/support/home/us/en/19/product-support/product/dell-3000cn/drivers Dell 3000cn Laser Printer]
+
**NVIDIA GeForce 9100
−
** IP 192.168.9.229 port 9100
+
*1x [http://support.hp.com/us-en/product/HP-Photosmart-C5200-All-in-One-Printer-series/3204462/model/3204463 HP Photosmart C5280 Scanner] - (it's actually an all-in-one, but the printer part isn't working)
−
* 1x [http://support.hp.com/us-en/product/HP-Photosmart-C5200-All-in-One-Printer-series/3204462/model/3204463 HP Photosmart C5280 Scanner] - (it's actually an all-in-one, but the printer part isn't working)
+
**The scanner is connected to the adjacent PC. To scan a document, open the System Menu and select ''Graphics > Simple Scan''
−
** The scanner is connected to the adjacent PC. To scan a document, open the System Menu and select ''Graphics > Simple Scan''
+
*1x [[Plotter]] HP Designjet 1050c plus  
−
* 1x [[Plotter]] HP Designjet 1050c plus  
+
**Capable of up to 36 inch wide prints.
−
** Capable of up to 36 inch wide prints.  
+
**Due to the cost of ink, designs should use colors instead of blacks.
−
** Due to the cost of ink, designs should use colors instead of blacks.
+
*1x [https://support.hp.com/us-en/product/HP-Deskjet-3510-e-All-in-One-Printer-series/5157460 HP DeskJet 3410]
−
* 1x [https://support.hp.com/us-en/product/HP-Deskjet-3510-e-All-in-One-Printer-series/5157460 HP DeskJet 3410]
+
**Backup 3in1 for Classroom
−
** Backup 3in1 for Classroom
 
 
</onlyinclude>
 
</onlyinclude>

Latest revision as of 17:26, 1 May 2022

MakeICT's classrooms are 3 950 sq ft area for workshops/classes, events, and shared workspace. They will provide a modern learning environment with all the tools needed by an instructor or student for teaching or learning.

Access Policy

Classroom

The classroom is reserved for workshops and classes according to the calendar. It can also be reserved by members following this policy:

A keyed-member in good standing may host a private meeting/event at the MakeICT makerspace as long as they are not charging a fee. If any rooms or resources are to be held or if the number of non-member guests exceeds the Guest Policy allowance, a reservation must be submitted and approved 14 days in advanced. The host member is responsible/liable for activities of their guests, and all guests must follow official guest policies. There is no fee for this resource to our members, but a donation is suggested to offset facility costs.

Fill out the reservation form to reserve the classroom for private meetings/events.

During times when it hasn't been reserved, they shall be considered a shared workspace.

Laptops

Members using the laptops agree to return them to the proper shelf and plug them in when finished, and keep them out of dirty and dusty areas such as the metal shop, wood shop, and ceramics room. The laptops are not to be removed from the Makerspace. To protect your personal information, it is strongly recommended to only access the internet from an Incognito window, and properly log out of all websites when finished browsing.

The laptops are stored in the ERP

Software Wanted to be installed on new images

Software Description Link License
Blender 3D creation suite: modeling, rigging, animation, rendering, etc. [1] GPL
Gimp Raster graphics editor used for image manipulation and editing, free-form drawing, etc. [2] GPL
Inkscape Vector graphics editor used to create and modify vector images. [3] GPL 2
Lightburn Layout, editing, and control software for laser cutters.
KiCAD Software suite for design of schematics for electronic circuits and their conversion to PCB designs. [4] GPL 3
Arduino IDE used to write and upload programs to Arduino compatible boards. [5] GPL
VScode Source-code editor that can be used with a variety of programming languages
Eclipse IDE Integrated development environment (IDE) used in computer programming [6] EPL
NotePad ++ A free, open source code editor and Notepad replacement that supports several languages. [7] GPL
Firefox Free and open-source web browser backed by Mozilla, a non-profit dedicated to internet health and privacy. [8] MPL 2.0
Chrome A cross-platform web browser developed by Google.
PrusaSlicer Open source slicer for FDM and SLA 3D printing. [9] GNU AGPL V3
Fusion 360 A cloud-based 3D modeling, CAD, CAM, CAE, and PCB software platform for product design and manufacturing.
FreeCAD An open-source parametric 3D modeler made primarily to design real-life objects of any size. [10] LGPL 2.1
OpenSCAD A free software application for creating solid 3D CAD objects using a script-only interface. [11] GPL2
7zip Free and open-source file archiver. [12] GNU LGPL
Python Python is an interpreted high-level general-purpose programming language. [13] PSFL (GPL compatible)
Putty Free and open-source terminal emulator, serial console and network file transfer application. [14]
LibreOffice Free and open-source office productivity software suite. [15] MPL 2.0
Git Source Control [16] GNU GPL 2
Audacity-Wait Free and open-source digital audio editor and recording application software. [17] GNU GPL 2
VideoLan Client (vlc) Free and open-source, portable, cross-platform media player software and streaming media server. [18] LGPL 2.1
Rosegarden Free software digital audio workstation program developed for Linux with ALSA and Qt4. [19] GPL 2
Mplayer Free and open-source media player software application. [20] GPL 2
SheetCam SheetCam is a low cost but feature packed CAM package. SheetCam is suitable for milling, routing, plasma, waterjet, laser and oxy-fuel cutting. [21]
Kstars Freely licensed planetarium program using the KDE Platform. [22] GPL 2
Stellarium Free and open-source planetarium. [23] GPL 2+
Siril Software application for astrophotography, which allows pre-processing and processing of images from any type of camera. [24] GPL 3

Equipment List

  • 1x Optoma EH500 DLP Projector
    • Full HD 1080p
    • 4700 Lumens
    • HDMI, DisplayPort, 2xVGA
  • 15x Toshiba S55T-B5152 Laptops
    • Dual-boot Debian Stretch (GNU/Linux) / Windows 10
    • Intel i5
    • 4gb RAM
    • 500gb hard drive
    • Intel HD Graphics + 1920x1080 Touchscreen display
    • SD card reader
  • 3x HP Pro 3005MT Internet-connected desktop PC's
    • PC 1: Ubuntu Studio (GNU/Linux), PC2: Windows10/Ubuntu Studio (gNU/Linux), PC3: Windows 7
    • AMD Athlon II X3 435 (triple-core)
    • 2.7gb RAM
    • 300gb hard drive
    • NVIDIA GeForce 9100
  • 1x HP Photosmart C5280 Scanner - (it's actually an all-in-one, but the printer part isn't working)
    • The scanner is connected to the adjacent PC. To scan a document, open the System Menu and select Graphics > Simple Scan
  • 1x Plotter HP Designjet 1050c plus
    • Capable of up to 36 inch wide prints.
    • Due to the cost of ink, designs should use colors instead of blacks.
  • 1x HP DeskJet 3410
    • Backup 3in1 for Classroom
Retrieved from "https://wiki.makeict.org/index.php?title=Classrooms&oldid=7443"