Difference between revisions of "Slicer Profiles"

From MakeICT Wiki
Jump to navigationJump to search
 
Line 8: Line 8:
 
#Run the installer
 
#Run the installer
 
#*Select only the first option, unless you want to install other component
 
#*Select only the first option, unless you want to install other component
#Download latest config bundle here: [https://drive.google.com/file/d/1woALfO213NSweN4U7s3OscoZcBQgWtwA/view?usp=share_link PrusaSlicer_config_bundle_MakeICT_20230203.ini]
+
#Download latest config bundle here: [https://drive.google.com/file/d/1QsHgDnYFBu3vL97Z7pfoO392PhKbeA8K/view?usp=drive_link PrusaSlicer_config_bundle_2_5_ini]
 
#File -> Import -> Import Config Bundle
 
#File -> Import -> Import Config Bundle
 
#Select downloaded config file
 
#Select downloaded config file
 
#Check back here for updates
 
#Check back here for updates

Latest revision as of 13:44, 16 March 2024

Below are the default slicer profiles for the 3D printers at MakeICT.

PrusaSlicer

To use these files:

  1. Download PrusaSlicer
    • From the section labeled "Drivers & Apps"
  2. Run the installer
    • Select only the first option, unless you want to install other component
  3. Download latest config bundle here: PrusaSlicer_config_bundle_2_5_ini
  4. File -> Import -> Import Config Bundle
  5. Select downloaded config file
  6. Check back here for updates