Difference between revisions of "Prusa i3 MK3"
From MakeICT Wiki
Jump to navigationJump to searchLine 37: | Line 37: | ||
*Remove filament immediately | *Remove filament immediately | ||
*Insert new material and it should automatically load | *Insert new material and it should automatically load | ||
− | ** If it doesn't load automatically, select 'Autoload Filament' from the menu and follow prompts | + | ** If it doesn't load automatically, select 'Autoload Filament' or 'Load Filament' from the menu and follow prompts |
=== Print Removal === | === Print Removal === |
Revision as of 15:12, 4 January 2019
Prusa i3 MK3 | |
---|---|
![]() Stock image of Prusa i3 MK3 | |
Technical Specifications | |
Build Volume | 250 x 210 x 200 mm |
Filament Types | PLA, ABS |
Filament Sizes | 1.75mm |
X/Y Resolution | 0.01 mm |
Z Resolution | ~0.01 mm |
Nozzle Diameter | 0.4 mm |
Max Nozzle Temperature | 300° C |
Heated Bed | Yes |
Max Bed Temperature | 100° C |
Additional Information | |
User Manual | https://manual.prusa3d.com/c/Original_Prusa_i3_MK3_kit_assembly |
Website | Prusa i3 MK3 Store Page |
Contents
Features
This printer has a number of advanced features that are not present on any of our other machines:
- Filament sensor to detect jams and material depletion
- Automatic bed leveling
- Head crash detection
Access Policy
See 3D_Printing#Machine_Access_Policy for access policy.
Use
See 3D Printing#Workflow for general workflow information.
DO NOT SPRAY BED WITH HAIRSPRAY!
Before Printing
In order for prints to adhere properly the bed must be clean. Wipe it down with isopropyl alcohal (NOT acetone!) before a print to ensure that the bed is free of oils and dust.
Filament Change
- Press the click wheel once for menu
- Select preheat and choose the appropriate material
- Once heated, press the click wheel for menu
- Scroll down and choose 'Unload Filament'
- Remove filament immediately
- Insert new material and it should automatically load
- If it doesn't load automatically, select 'Autoload Filament' or 'Load Filament' from the menu and follow prompts
Print Removal
DO NOT USE SCRAPERS!
Lift the spring steel sheet off of the bed by the front corners. Gently flex the bed in both directions until the print loosens enough to be removed.
Acquisition
This printer was purchased using a combination of membership dues and targeted donations. Thanks to everyone who donated!