Difference between revisions of "Board Meeting 2022-03-17"

From MakeICT Wiki
Jump to navigationJump to search
Line 86: Line 86:
 
*Meeting will occur on Monday
 
*Meeting will occur on Monday
  
 +
'''Required Authorization'''-
 +
 +
Woodworking is hazardous by nature. In order to use any of the woodshop tools both members and nonmembers must pass the Woodshop Authorization course. We want everyone to go home safe and in one piece! SAFE OPERATION of tools is our top priority.
 +
 +
'''PPE ('''Personal Safety Equipment)
 +
 +
Anyone entering the shop will be required to wear '''safety glasses. U'''se of additional PPE such as safety hearing protection, dust masks is heartily encouraged.
 +
 +
'''Cleanliness'''
 +
 +
A clean shop is a safe and productive shop. All members and nonmembers are expected to clean after themselves '''''while''''' working, and thoroughly clean before leaving the area in which they’re working.
 +
 +
'''Materials'''
 +
 +
'''Most''' woods are allowed in the woodshop, but to protect machinery as well as to protect other members, only WELL INSPECTED reclaimed lumber free of sand, gravel, nails, screws, staples or finish will be allowed in the shop.
 +
 +
'''Pressure treated lumber will NOT be allowed ANY time.'''
 +
 +
'''Hazardous Wood Authorization'''
 +
 +
Wood dust is also a safety concern, so cleanliness is of extreme importance. Some people are allergic to certain lumber. These individuals can and have become sensitized to such materials. Symptoms range from the minor problems, like Dermatitis (Skin Rash), to more serious problems, like Asthma Complication and Mucosal Irritation. '''Therefore, the use of woods from the following list requires additional authorization and training for proper clean-up after their use.''' These courses will be posted regularly to the calendar.
 +
 +
§  African Mahogonay
 +
 +
§  Jatoba “Brazilian Cherry”
 +
 +
§  Ebony
 +
 +
§  Ipe, “Brazilian Walnut”
 +
 +
§  Iroko, “African Teak”
 +
 +
§  Makore, “African Cherry”
 +
 +
§  Mansonia, “African Walnut”
 +
 +
§  MDF
 +
 +
§  Olivewood
 +
 +
§  Padauk
 +
 +
§  Particle Board
 +
 +
§  Purple Heart
 +
 +
§  Walnut
 +
 +
§  Wenge
 +
 +
§  Western Red Cedar
 +
 +
It is '''HIGHLY''' recommended that we use a buddy system, where no single person is working in the shop without a second person in the building so that if there is an injury, somebody else is there to call for help or assist you.
 +
 +
[No intoxication clause pending board decision]
  
 
==Committee Reports==
 
==Committee Reports==

Revision as of 18:28, 17 March 2022

AGENDA

Attendance

Board Members

Absent:

  • James Lancaster, Secretary
  • Anna DiSalvo, At-Large
  • Rustin Atkeisson, Vice-President
  • Jai Chauhan, President
  • Doug Wilson, At-Large
  • Beverly Schellenger, Treasurer
  • David Hanson, At-Large
  • Aaron Rivers, At-Large


Members

Standing Items

  • Thanks & Recognition


Old Business

COVID Mask Policy Discussion / Update - All

  • Prior meetings:
  • MakeICT in light of the Omicron spikes requires that all people in the building in groups of 2 or more wear a mask.


Name alignment between various locations - Jai

  • Prior:
    • Has not been done with the KS SOS office yet.
      • Nothing since that


Revise Committee Policy - James


Authorizations

    • Prior:
      • Require people to resubmit the access policies?
      • Designate what that class is for any authorizations.
      • Patrick will bring this up at the next area lead meeting.
      • Doug mentions possibly making/giving stickers
      • Badge reader with name/active and authorization (Would be cool based with Patrick)
        • Mention of the wiki and issues with it being public
        • Couple of ideas with regard to it being public or non-public, as a general list
        • Emergency contact lookup, in an emergency would not be germane as 911 would be the call.
        • Authorization for tool maintenance? Aaron will bring up at Area Leads meeting.
          • Revisit authorizations for tools? (Specifically CNC tools, cnc sublead?)
    • At area lead meeting most of this was discussed, some not, as people were not there. Prototype of authorization lookup working.
    • As of the 10th haven't had review/new access policies sent to Secretary
    • Two were sent later:
  • Tabled until the next board meeting. Reminders will be sent out to the board on March 10th. Area Leads need to have their written policy changes, or lack thereof, ready for March 10th.
    • No additional Access Policies have been recieved as of March 10th.

New Business

Treasurer’s Report - Bev

Area Reports

  • Meeting will occur on Monday

Required Authorization-

Woodworking is hazardous by nature. In order to use any of the woodshop tools both members and nonmembers must pass the Woodshop Authorization course. We want everyone to go home safe and in one piece! SAFE OPERATION of tools is our top priority.

PPE (Personal Safety Equipment)

Anyone entering the shop will be required to wear safety glasses. Use of additional PPE such as safety hearing protection, dust masks is heartily encouraged.

Cleanliness

A clean shop is a safe and productive shop. All members and nonmembers are expected to clean after themselves while working, and thoroughly clean before leaving the area in which they’re working.

Materials

Most woods are allowed in the woodshop, but to protect machinery as well as to protect other members, only WELL INSPECTED reclaimed lumber free of sand, gravel, nails, screws, staples or finish will be allowed in the shop.

Pressure treated lumber will NOT be allowed ANY time.

Hazardous Wood Authorization

Wood dust is also a safety concern, so cleanliness is of extreme importance. Some people are allergic to certain lumber. These individuals can and have become sensitized to such materials. Symptoms range from the minor problems, like Dermatitis (Skin Rash), to more serious problems, like Asthma Complication and Mucosal Irritation. Therefore, the use of woods from the following list requires additional authorization and training for proper clean-up after their use. These courses will be posted regularly to the calendar.

§  African Mahogonay

§  Jatoba “Brazilian Cherry”

§  Ebony

§  Ipe, “Brazilian Walnut”

§  Iroko, “African Teak”

§  Makore, “African Cherry”

§  Mansonia, “African Walnut”

§  MDF

§  Olivewood

§  Padauk

§  Particle Board

§  Purple Heart

§  Walnut

§  Wenge

§  Western Red Cedar

It is HIGHLY recommended that we use a buddy system, where no single person is working in the shop without a second person in the building so that if there is an injury, somebody else is there to call for help or assist you.

[No intoxication clause pending board decision]

Committee Reports

Awards Committee & Donor Wall - Jai

Next meeting not on calendar: When?

Classroom Management Committee - LaDeana Dockery

  • Next meeting on calendar (Standard schedule: every 2nd and 4th Thursday @ 8pm)
  • Last meeting 8 March 2022
  • Donations of computers for a computer lab has happened. Partially in inventory, and need some work to setup. Possibly including electrical.
  • John Nicholas and Malissa Long are in charge of the Open House
  • Proposal to charge just a booth fee for the Open House.



Communications (and Wikibrarian) - Malissa Long

  • Next meeting on calendar (Standard schedule: 4th Wednesday @ 6:30 pm)


Events Committee - X

  • See above (Classroom Management Committee)


Facilities Committee - Ralph Romig

  • On Calendar Tuesday 6:30

Finance Committee - Dan Kries

  • 3rd Monday of the month at 6:30 (Is this correct? - schedule dependent, may change)
  • Has not been posted on public calendar.


Forge Committee - James Seymour/Mike Atherton

  • Next meeting on calendar (Standard schedule: every 2nd Wednesday @ 7pm)
  • Remove?
  • Last project: Belt Grinder
  • Possibly someone else interested will be at next member orientation


Fundraising - Ethan Doak

  • Next meeting on calendar (Standard schedule: every 1st Friday @ 7pm)
  • Last meeting: Talk with person who does fundraising professionally
    • Will try to meet with them before March 12th.


Lounge/Breakroom - David Mendoza

Next meeting not on calendar: When?

Letterpress - David Springs

Next meeting not on calendar: When?

  • Working on installing parts, and setting up power.


Garden - Sean Sandefur

  • Next meeting on calendar (Standard schedule: every 2nd & 4th Monday @ 6pm)


IT - Tom Bloom

Next meeting not on calendar: When?

Inventory - Anna DiSalvo/Wallis Mead

Membership (and Community Outreach) - Jai

Membership as of 2021-03-10: 442 (plus 2 donors) (+1 since 02-10)



Outreach (and Education) - LaDeana Dockery

  • See Classroom above.

Scholarships - x

  • Per July decision will be handled by Finance.

Security (and Safety) - Ken Steadman/David Springs

  • Next meeting on calendar (Standard schedule: every 4th Monday @ 6pm)
  • UPS was fixed.


Special Projects (and Makerfaire) - x

  • See Events

Welcome Center - Angel

Next meeting not on calendar: When?

Other Items Discussed

Past Events

Upcoming Events

  • Maker Monday
    • 2nd and 4th Mondays
  • Member Orientation

Decision Summary

    Task Summary