Difference between revisions of "Slicer Profiles"

From MakeICT Wiki
Jump to navigationJump to search
Line 1: Line 1:
−
Below are the default slicer profiles for the 3d printers at MakeICT.
+
Below are the default slicer profiles for the 3D printers at MakeICT.
  
−
== PrusaSlicer ==
+
==PrusaSlicer==
 
To use these files:
 
To use these files:
−
#[https://www.prusa3d.com/drivers/ Download PrusaSlicer]
+
 
 +
#[https://help.prusa3d.com/downloads Download PrusaSlicer]
 
#*From the section labeled "Drivers & Apps"
 
#*From the section labeled "Drivers & Apps"
 
#Run the installer
 
#Run the installer
−
#*Select only the first option, unless you want to install other components
+
#*Select only the first option, unless you want to install other component
−
=== Vendor Profiles ===
+
#Download latest config bundle here: [https://drive.google.com/file/d/1woALfO213NSweN4U7s3OscoZcBQgWtwA/view?usp=share_link PrusaSlicer_config_bundle_MakeICT_20230203.ini]
−
This will replace all default Prusa profiles with settings for the MakeICT printers. Use this option if you do not use PrusaSlicer for your own printers, and you want to get updates automatically.
 
−
#Download latest vendor settings here: [https://github.com/MakeICT/Slic3r-Configuration/releases MakeICT vendor settings]
 
−
#Extract the Zip file
 
−
#Replace the contents of the vendor folder for your PrusaSlic3r installation with the contents of the zip file
 
−
#*Windows: %APPDATA%/PrusaSlicer/vendor
 
−
#*Mac: ~/Library/Application\ Support/PrusaSlicer/vendor
 
−
#*Linux: ~/.PrusaSlicer/vendor
 
−
 
 
−
=== Config Bundle ===
 
−
This will add additional profiles to PrusaSlicer, but will not remove any that you have currently. These profiles will not update automatically, so you will need to periodically download updates.
 
−
#Download latest config bundle here: [https://drive.google.com/open?id=1kyhA1UhlWdWN2ZWVRo36FLeRP3plHbPJ PrusaSlicer_config_bundle_08-21-19.ini]
 
 
#File -> Import -> Import Config Bundle
 
#File -> Import -> Import Config Bundle
 
#Select downloaded config file
 
#Select downloaded config file
 
#Check back here for updates
 
#Check back here for updates

Revision as of 11:50, 5 February 2023

Below are the default slicer profiles for the 3D printers at MakeICT.

PrusaSlicer

To use these files:

  1. Download PrusaSlicer
    • From the section labeled "Drivers & Apps"
  2. Run the installer
    • Select only the first option, unless you want to install other component
  3. Download latest config bundle here: PrusaSlicer_config_bundle_MakeICT_20230203.ini
  4. File -> Import -> Import Config Bundle
  5. Select downloaded config file
  6. Check back here for updates
Retrieved from "https://wiki.makeict.org/index.php?title=Slicer_Profiles&oldid=8811"