Classrooms
General Information
MakeICT's classroom is a 750 sq ft area for workshops/classes, events, and shared workspace. It will provide a modern learning environment with all the tools needed by an instructor or student for teaching or learning.
Sam Schurter is the Benevolent Dictator over the Classroom.
Access Policy
The classroom is reserved for workshops and classes according to the calendar. It can also be reserved by members following this policy:
A keyed-member in good standing may host a private meeting/event at the MakeICT makerspace as long as they are not charging a fee. If any rooms or resources are to be held or if the number of non-member guests exceeds the Guest Policy allowance, a reservation must be submitted and approved 14 days in advanced. The host member is responsible/liable for activities of their guests, and all guests must follow official guest policies. There is no fee for this resource to our members, but a donation is suggested to offset facility costs.
During times when it hasn't been reserved, it shall be considered shared workspace.
Equipment List
- 1x Optoma EH500 DLP Projector
- Full HD 1080p
- 4700 Lumens
- HDMI, DisplayPort, 2xVGA
- 15x Toshiba S55T-B5152 Laptops
- Dual-boot Debian Stretch (GNU/Linux) / Windows 10
- Intel i5
- 4gb RAM
- 500gb hard drive
- Intel HD Graphics + 1920x1080 Touchscreen display
- SD card reader
- 3x HP Pro 3005MT Internet-connected desktop PC's
- Debian Stretch (GNU/Linux)
- AMD Athlon II X3 435 (triple-core)
- 2.7gb RAM
- 300gb hard drive
- NVIDIA GeForce 9100
- 1x Dell 3000cn Laser Printer
- IP 192.168.0.21, port 9100
- 1x HP Photosmart C5280 Scanner - (it's actually an all-in-one, but the printer part isn't working)
- The scanner is connected to the adjacent PC. To scan a document, open the System Menu and select Graphics > Simple Scan