MakeICT Maker Creator Challenge of the Month

From MakeICT Wiki
Revision as of 08:46, 1 September 2018 by Rustin Atkeisson (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

Are you ready for a new challenge for the month?

Well here you go!

Err, do you need a recap of what MMCMC is first? Search for 'MakeICT Maker Creator Monthly Challenge' or click on MMCMC

The Two 2x4 Challenge

September 2018 - Sponsored by AniDragon Show us what can you do with a pair of 8 foot dimensioned 2x4s. You can fasten the pieces together however you want (screws, glue, other bits of 2x4, left over Christmas wrapping paper, wire from blinky LEDs, etc.), but the main material of the project must be made from a maximum of two 8ft stud grade 2x4s. You can stain, paint, or coat the 2x4s how ever you want, as long as there is a photo that clearly shows the material was a 2x4 at some point.

That's it, those are the requirements. Best of luck makers and of course, have FUN!

  • Prize: $25 gift card to MakeICT
  • Submissions due by midnight September 28th, 2018
  • Winner to be Announced October 1st, 2018
Retrieved from "https://wiki.makeict.org/index.php?title=MakeICT_Maker_Creator_Challenge_of_the_Month&oldid=6118"