Rostock Max V2

From MakeICT Wiki
Revision as of 21:49, 22 December 2015 by Dominic Canare (talk | contribs) (Created page with "The Rostock Max V2 uses a tablet PC with built-in slicing software. To create a print, you just need to move your .STL file to the micro SD card which is plugged into the tabl...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

The Rostock Max V2 uses a tablet PC with built-in slicing software. To create a print, you just need to move your .STL file to the micro SD card which is plugged into the tablet.

The easiest way to do this is via the cloud service provided by MatterControl.

  1. Go to sync.mattercontrol.com
  2. Login with info@makeict.org / makeict!
  3. Find the RostockMax v2 and click "Add File to Queue"
  4. From the tablet itself, you can now print your STL from the queue.
Retrieved from "https://wiki.makeict.org/index.php?title=Rostock_Max_V2&oldid=2830"