Difference between revisions of "RepRap Prusa Mendel"
From MakeICT Wiki
Jump to navigationJump to searchLine 13: | Line 13: | ||
|bedTemperature = N/A | |bedTemperature = N/A | ||
|manual = Reprap Prusa Mendel Build Manual MASTER V2 Reduced.pdf | |manual = Reprap Prusa Mendel Build Manual MASTER V2 Reduced.pdf | ||
− | |website = | + | |website = http://reprap.org/ |
− | |websiteText = | + | |websiteText = RepRap Website |
|features = This printer is the best to use for flexible filaments (such as ninjaflex) due to having the extruder mounted directly to the nozzle. | |features = This printer is the best to use for flexible filaments (such as ninjaflex) due to having the extruder mounted directly to the nozzle. |
Revision as of 19:41, 30 January 2016
RepRap Prusa Mendel | |
---|---|
{{{imageCaption}}} | |
Technical Specifications | |
Build Volume | 180 x 180 x 100ish mm |
Filament Types | PLA |
Filament Sizes | 1.75mm |
X/Y Resolution | 0.125 mm |
Z Resolution | .0039 mm |
Nozzle Diameter | 0.35 mm |
Max Nozzle Temperature | ???° C |
Heated Bed | No |
Max Bed Temperature | N/A° C |
Additional Information | |
User Manual | Reprap Prusa Mendel Build Manual MASTER V2 Reduced.pdf |
Website | RepRap Website |
Contents
Features
This printer is the best to use for flexible filaments (such as ninjaflex) due to having the extruder mounted directly to the nozzle.
Access Policy
{{{accessPolicy}}}
Use
This printer is controlled through the software Pronterface running on the attached computer.
If you have not been instructed on use, please see one of the people who have (Please see Dominic, Tom, Christian, or James L, or ask questions on the mailing list.)
Acquisition
{{{acquisition}}}