FabLab Area
From MakeICT Wiki
Revision as of 00:34, 28 September 2015 by Mike Doolittle (talk | contribs)
Attention! This page or section is out of date. Help us out by modifying this page.
Details: missing details and access policies
Details: missing details and access policies
Contents
General Information
MakeICT's FabLab is an open 300 sq ft area dedicated to fabrication and rapid prototyping. Here is where you can test ideas, and concepts before moving on to more expensive materials or processes. Or, simply enjoy the creative process and see what you can make. The FabLab currently houses 3D printers, foam cutter, and laser engraver/cutter.
Per MakeICT policy, all machinery and tools require prior instruction and certification before use. We want all our members and guests to be safe, and the equipment kept in top condition so all can enjoy.
Bryan Barr is the Benevolent Dictator over the FabLab.
Machine Access Policy
3D Printers
- To use the 3D Printers, you must take the Intro to 3D Printing Class (TBD)
- 3D Printer Peer Certification process is under construction
- List of Laser 3D Printer approved users is listed below
Foam Cutter
- To use the Foam Cutter, you must take the Intro to CNC: A Foam Cutting Workshop (TBD)
- Foam Cutter Certification is under construction
- List of Foam Cutter approved users is listed below
Laser Cutter
- To use the Laser Cutter you, must take the Laser Cutter Basics Class (this takes affect 10/3/15)
- Laser Cutter Certification is under construction
- List of Laser Cutter approved users is listed below
Classses
- Intro to CNC: a Foam Cutting Workshop
- Intro to 3D Printing
- Advanced 3D Printing and Modeling
- Laser Cutter Basics Class
3D Printer Safety
- Do not use any machine you are not trained on and comfortable using. If at any time you are unsure of what you are doing, stop immediately and ask for help.
- Do not use any machine that is not in good working order. Stop, unplug and leave a note on the machine and notify the woodshop BD.
- NEVER ASSUME A TOOL IS PROPERLY ADJUSTED. Always check the tool prior to use.
Foam Cutter Safety
- Do not use any machine you are not trained on and comfortable using. If at any time you are unsure of what you are doing, stop immediately and ask for help.
- Do not use any machine that is not in good working order. Stop, unplug and leave a note on the machine and notify the woodshop BD.
- NEVER ASSUME A TOOL IS PROPERLY ADJUSTED. Always check the tool prior to use.
Laser Cutter Safety
- Do not use any machine you are not trained on and comfortable using. If at any time you are unsure of what you are doing, stop immediately and ask for help.
- Do not use any machine that is not in good working order. Stop, unplug and leave a note on the machine and notify the woodshop BD.
- NEVER ASSUME A TOOL IS PROPERLY ADJUSTED. Always check the tool prior to use.
Equipment List
Picture | What | Manufacturer | Model | Power | Status | Expert | How To |
---|---|---|---|---|---|---|---|
3D Printer | SeeMeCNC | Rostock Max v2 | 110 | Working | Bryan Barr | [MatterControl Wiki] | |
3D Printer | RepRap | 110 | Working | James Lancaster | Information | ||
3D Printer | Ultimaker | Ultimaker II | 110 | Working | Tom McGuire | instructions | |
Foam Cutter | Tom McGuire | 110 | Working | Tom McGuire | Basic Use Guidelines | ||
Laser Cutter | Rabbit Laser | QX1290 | 230 | Working | Mike Doolittle | Laser Cutter Guidelines |
3D Printer Approved Users
Name | Notes | Certification Date | Peer Certified Name |
---|---|---|---|
Bryan Barr | FabLab BD | ||
Mike Doolittle | |||
Dustin | |||
Dom | |||
Tom | |||
Kip | |||
Jeff Eck | |||
Foam Cutter Approved Users
Name | Notes | Certification Date |
---|---|---|
Bryan Barr | FabLab BD | |
Tom | Foam Cutter instructor | |
Dom |
Laser Cutter Approved Users
Name | Notes | Certification Date |
---|---|---|
Bryan Barr | FabLab BD | |
Mike Doolittle | Laser Cutter instructor | |
Jerry Carpenter | ||
David Springs | ||
William Davisson | ||
Brad Cooley | ||
Ivan Quiroz | ||
Jonny Fosnight | ||
John Alexanders | ||
Stephen Reckers | ||
Mike Hutton |