FabLab Area
From MakeICT Wiki
Revision as of 23:26, 27 September 2015 by Mike Doolittle (talk | contribs) (→3D Printer Approved Users)
Attention! This page or section is out of date. Help us out by modifying this page.
Details: missing details and access policies
Details: missing details and access policies
Contents
General Information
MakeICT's FabLab is an open 200 sq ft area dedicated to fabrication and rapid prototyping. Here is where you can test ideas, and concepts before moving on to more expensive materials or processes. Or, simply enjoy the creative process and see what you can make. The FabLab currently houses 3D printers, foam cutter, and laser engraver/cutter. Per MakeICT policy, all machinery and tools require prior instruction and certification before use. We want all our members and guests to be safe, and the equipment kept in top condition so all can enjoy.
Bryan Barr is the Benevolent Dictator over the FabLab.
Machine Access Policy
Laser Engraver/Cutter
- To use the Laser Engraver/Cutter you, must take the Laser Engraver/Cutter Basics Class (this takes affect 10/3/15)
- Certification is under construction
- List of Laser Engraver/Cutter approved users is listed below
3D Printers
- To use the 3D Printers, you must take the Intro to 3D Printing Class (TBD)
- Certification is under construction
Foam Cutter
- To use the Foam Cutter, you must take the Intro to CNC: A Foam Cutting Workshop (TBD)
- Certification is under construction
Classses
- Intro to CNC: a Foam Cutting Workshop
- Intro to 3D Printing
- Advanced 3D Printing and Modeling
- Laser Engraver/Cutter Basics Class
Equipment List
| Picture | What | Manufacturer | Model | Power | Status | Expert | How To |
|---|---|---|---|---|---|---|---|
 |
3D Printer | SeeMeCNC | Rostock Max v2 | 110 | Working | Bryan Barr | [MatterControl Wiki] |
 |
3D Printer | RepRap | 110 | Working | James Lancaster | Information | |
 |
3D Printer | Ultimaker | Ultimaker II | 110 | Working | Tom McGuire | instructions |
 |
Foam Cutter | Tom McGuire | 110 | Working | Tom McGuire | Basic Use Guidelines | |
 |
Laser Cutter | Rabbit Laser | QX1290 | 230 | Working | Mike Doolittle | Laser Cutter Guidelines |
Laser Cutter Approved Users
| Name | Notes |
|---|---|
| Bryan Barr | FabLab BD |
| Mike Doolittle | Laser Cutter instructor |
| Jerry Carpenter | |
| David Springs | |
| William Davisson | |
| Brad Cooley | |
| Ivan Quiroz | |
| Jonny Fosnight | |
| John Alexanders | |
| Stephen Reckers | |
| Mike Hutton |
3D Printer Approved Users
| Name | Notes | Certification Date | peer who certified | |
|---|---|---|---|---|
| Bryan Barr | FabLab BD | |||
| Mike Doolittle | ||||
| Dustin | ||||
| Dom | ||||
| Tom | ||||
| Kip | ||||
| Jeff Eck | ||||
