RepRap Prusa Mendel
From MakeICT Wiki
Revision as of 17:12, 23 June 2016 by James Lancaster (talk | contribs)
| RepRap Prusa Mendel | |
|---|---|
 {{{imageCaption}}} | |
| Technical Specifications | |
| Build Volume | 180 x 180 x 100ish mm |
| Filament Types | PLA |
| Filament Sizes | 1.75mm |
| X/Y Resolution | 0.125 mm |
| Z Resolution | .0039 mm |
| Nozzle Diameter | 0.35 mm |
| Max Nozzle Temperature | 250 C° C |
| Heated Bed | No |
| Max Bed Temperature | N/A° C |
| Additional Information | |
| User Manual | Reprap Prusa Mendel Build Manual MASTER V2 Reduced.pdf |
| Website | RepRap Website |
Contents
Features
This printer is the best to use for flexible filaments (such as ninjaflex) due to having the extruder mounted directly to the nozzle.
Access Policy
See 3D Printing for access policy.
Use
This printer is controlled through the software Pronterface running on the attached computer.
This printer is a bit more challenging to use than the others. If you have not been instructed on use, please see one of the people who have (Please see Dominic, Tom, Christian, or James L, or ask questions on the mailing list.)
Acquisition
{{{acquisition}}}
