FabLab Area

Attention! This page or section is out of date. Help us out by modifying this page.
Details: missing details and access policies

General Information

MakeICT's FabLab is an open 300 sq ft area dedicated to fabrication and rapid prototyping. Here is where you can test ideas, and concepts before moving on to more expensive materials or processes. Or, simply enjoy the creative process and see what you can make. The FabLab currently houses 3D printers, foam cutter, and laser engraver/cutter.

Per MakeICT policy, all machinery and tools require prior instruction and certification before use. We want all our members and guests to be safe, and the equipment kept in top condition so all can enjoy.

Bryan Barr is the Benevolent Dictator over the FabLab.

Machine Access Policy

3D Printers

• To use the 3D Printers, you must take the Intro to 3D Printing Class (TBD)
• 3D Printer Peer Certification process is under construction
• List of Laser 3D Printer approved users is listed below

Foam Cutter

• To use the Foam Cutter, you must take the Intro to CNC: A Foam Cutting Workshop (TBD)
• Foam Cutter Certification is under construction
• List of Foam Cutter approved users is listed below

Laser Cutter

• To use the Laser Cutter you, must take the Laser Cutter Basics Class (this takes affect 10/3/15)
• Laser Cutter Certification is under construction
• List of Laser Cutter approved users is listed below

Classses

• Intro to CNC: a Foam Cutting Workshop
• Intro to 3D Printing
• Advanced 3D Printing and Modeling
• Laser Cutter Basics Class

3D Printer Safety

1. Do not use any machine you are not trained on and comfortable using. If at any time you are unsure of what you are doing, stop immediately and ask for help.
2. Do not use any machine that is not in good working order. Stop, unplug and leave a note on the machine and notify the woodshop BD.
3. NEVER ASSUME A TOOL IS PROPERLY ADJUSTED. Always check the tool prior to use.

Foam Cutter Safety

1. Do not use any machine you are not trained on and comfortable using. If at any time you are unsure of what you are doing, stop immediately and ask for help.
2. Do not use any machine that is not in good working order. Stop, unplug and leave a note on the machine and notify the woodshop BD.
3. NEVER ASSUME A TOOL IS PROPERLY ADJUSTED. Always check the tool prior to use.

Laser Cutter Safety

1. Do not use any machine you are not trained on and comfortable using. If at any time you are unsure of what you are doing, stop immediately and ask for help.
2. Do not use any machine that is not in good working order. Stop, unplug and leave a note on the machine and notify the woodshop BD.
3. NEVER ASSUME A TOOL IS PROPERLY ADJUSTED. Always check the tool prior to use.

Equipment List

Picture	What	Manufacturer	Model	Power	Status	Expert	How To
	3D Printer	SeeMeCNC	Rostock Max v2	110	Working	Bryan Barr	[MatterControl Wiki]
	3D Printer	RepRap		110	Working	James Lancaster	Information
	3D Printer	Ultimaker	Ultimaker II	110	Working	Tom McGuire	instructions
	Foam Cutter	Tom McGuire		110	Working	Tom McGuire	Basic Use Guidelines
	Laser Cutter	Rabbit Laser	QX1290	230	Working	Mike Doolittle	Laser Cutter Guidelines

3D Printer Approved Users

Name	Notes	Certification Date	Peer Certified Name
Bryan Barr	FabLab BD
Mike Doolittle
Dustin
Dom
Tom
Kip
Jeff Eck

Foam Cutter Approved Users

Name	Notes	Certification Date
Bryan Barr	FabLab BD
Tom	Foam Cutter instructor
Dom

Laser Cutter Approved Users

Name	Notes	Certification Date
Bryan Barr	FabLab BD
Mike Doolittle	Laser Cutter instructor
Jerry Carpenter
David Springs
William Davisson
Brad Cooley
Ivan Quiroz
Jonny Fosnight
John Alexanders
Stephen Reckers
Mike Hutton