RepRap Prusa Mendel
From MakeICT Wiki
Revision as of 01:02, 30 January 2016 by Christian Kindel (talk | contribs)
| RepRap Prusa Mendel | |
|---|---|
 {{{imageCaption}}} | |
| Technical Specifications | |
| Build Volume | 180 x 180 x 100ish mm |
| Filament Types | PLA |
| Filament Sizes | 1.75mm |
| X/Y Resolution | 0.125 mm |
| Z Resolution | .0039 mm |
| Nozzle Diameter | 0.35 mm |
| Max Nozzle Temperature | ???° C |
| Heated Bed | No |
| Max Bed Temperature | N/A° C |
| Additional Information | |
| User Manual | [[Media:{{{manual}}}|{{{manual}}}]] |
| Website | [{{{website}}} {{{websiteText}}}] |
Contents
Features
This printer is the best to use for flexible filaments (such as ninjaflex) due to having the extruder mounted directly to the nozzle.
Access Policy
{{{accessPolicy}}}
Use
This printer is controlled through the software Pronterface running on the attached computer.
If you have not been instructed on use, please see one of the people who have (Please see Dominic, Tom, Christian, or James L, or ask questions on the mailing list.)
Acquisition
{{{acquisition}}}
