FabLab Area

Attention! This page or section is out of date. Help us out by modifying this page.
Details: missing details and access policies

General Information

MakeICT's FabLab is an open 300 sq ft area dedicated to fabrication and rapid prototyping. Here is where you can test ideas, and concepts before moving on to more expensive materials or processes. Or, simply enjoy the creative process and see what you can make. The FabLab currently houses 3D printers, foam cutter, and laser engraver/cutter.

Per MakeICT policy, all machinery and tools require prior instruction and certification before use. We want all our members and guests to be safe, and the equipment kept in top condition so all can enjoy.

Bryan Barr is the Benevolent Dictator over the FabLab.

Machine Access Policy

Clean up! Users are responsible for clean up after themselves; failure to which may result in loss of FABLAB Privileges.

3D Printers

• You can take the Intro to 3D Printing Class to get a better understanding of 3D printers
• The 3D Printer Peer Certification process is required for you to be approved to use the 3D Printers
• List of 3D Printer approved users is listed below

Foam Cutter

• To use the Foam Cutter, you could take the Intro to CNC: A Foam Cutting Workshop
• Foam Cutter Peer Certification is required for you to be approved to use the Foam Cutter
• List of Foam Cutter approved users is listed below

Laser Cutter

• To use the Laser Cutter you, must take the Laser Cutter Basics Class (this takes affect 10/3/15)
• The Laser Cutter Certification process is required for you to be approved to use the Laser Cutter
• List of Laser Cutter approved users is listed below

Classses

• Intro to CNC: a Foam Cutting Workshop
• Intro to 3D Printing
• Advanced 3D Printing and Modeling
• Laser Cutter Basics Class

FabLab Area Safety

1. Do not use any machine you are not trained on and comfortable using. If at any time you are unsure of what you are doing, stop immediately and ask for help.
2. Do not use any machine that is not in good working order. Stop, unplug and leave a note on the machine and notify the FabLab BD OR Mike Doolittle.
3. NEVER ASSUME A TOOL IS PROPERLY ADJUSTED. Always check the tool prior to use.
4. NEVER MODIFY OR HACK THE 3D PRINTER, FOAM CUTTER OR LASER CUTTER.

Laser Cutter Specific Safety

LASER cutters pose a fire hazard. LASER cutters use a high intensity beam of LASER light that can produce extremely high temperatures as it comes into contact with the materials it is engraving, marking or cutting.

The laser cutter is a potentially dangerous piece of equipment which must only be operated by members who have received appropriate training and who take due care. The top things to always remember when using the laser cutter are: ONLY USE THE LASER CUTTER IF YOU ARE ON THE LIST OF TRAINED USERS NEVER LEAVE THE LASER CUTTER RUNNING UNATTENDED NEVER CUT MATERIALS THAT YOU DON'T KNOW ARE SAFE KNOW WHAT TO DO IF A FIRE BREAKS OUT

• HIT the BIG RED button on the laser control panel
• A Carbon Dioxide (CO2) fire extinguisher is located next to the laser cutter.

Before starting the laser cutter:

1. Check the cooling solution window in the back of the chiller before starting any project.

After starting the laser cutter:

1. Before cutting make sure the air compressor and the fan motor are on.
2. Refer to the cutting manual for appropriate engraving and cutting Power and Speed settings for varied materials.
3. Beware of FLAMMABLE materials while using the machines.
4. Certain materials are NOT ALLOWED in the laser cutter including any PCV material, Reflective materials

Tips:

• The laser cutter will generally not cut anything greater than 0.25” (6mm), anything thicker will require several passes.

Equipment List

Picture	What	Manufacturer	Model	Power	Status	Expert	How To
	3D Printer	SeeMeCNC	Rostock Max v2	110	Working	Bryan Barr	[MatterControl Wiki]
	3D Printer	RepRap		110	Working	James Lancaster	Information
	3D Printer	Ultimaker	Ultimaker II	110	Working	Tom McGuire	instructions
	Foam Cutter	Tom McGuire		110	Working	Tom McGuire	Basic Use Guidelines
	Laser Cutter	Rabbit Laser	QX1290	230	Working	Mike Doolittle	Laser Cutter Guidelines

3D Printer Users (to be changed to Certified Users once approved)

Name	Notes	Certification Date	Peer Certified Name
Bryan Barr	FabLab BD
James Lancaster
Mike Doolittle
Dustin
Dom
Tom
Kip
Jeff Eck

Foam Cutter Users (to be changed to Certified Users once approved)

Name	Notes	Certification Date
Bryan Barr	FabLab BD
Tom	Foam Cutter instructor
Dom

Laser Cutter Approved Users (to be changed to Certified Users once approved)

Name	Notes	Certification Date
Bryan Barr	FabLab BD
Mike Doolittle	Laser Cutter instructor
John Alexander
Jerry Carpenter
David Springs
William Davisson
Brad Cooley
Ivan Quiroz
Jonny Fosnight
Stephen Reckers
Mike Hutton