Difference between revisions of "Rostock Max V2"
From MakeICT Wiki
Jump to navigationJump to searchm |
|||
Line 14: | Line 14: | ||
|heatedBed = yes (SLOW) | |heatedBed = yes (SLOW) | ||
|bedTemperature = 120 | |bedTemperature = 120 | ||
− | |manual = | + | |manual = Rostock-MAX-v2-User-Guide-1stEdition.pdf |
|website = http://www.seemecnc.com/products/rostock-max-complete-kit | |website = http://www.seemecnc.com/products/rostock-max-complete-kit | ||
|websiteText = Rostock Max V2 Product Page | |websiteText = Rostock Max V2 Product Page |
Revision as of 19:24, 30 January 2016
Rostock Max V2 | |
---|---|
![]() Rostock Max V2 3D Printer | |
Technical Specifications | |
Build Volume | 280 (circular) x 375 mm |
Filament Types | PLA, ABS |
Filament Sizes | 1.75 mm |
X/Y Resolution | 0.1mm |
Z Resolution | 0.0125 |
Nozzle Diameter | 0.5mm |
Max Nozzle Temperature | 245° C |
Heated Bed | yes (SLOW) |
Max Bed Temperature | 120° C |
Additional Information | |
User Manual | Rostock-MAX-v2-User-Guide-1stEdition.pdf |
Website | Rostock Max V2 Product Page |
Contents
Features
The Rostock has the largest build area of MakeICT's 3D printers.
Access Policy
{{{accessPolicy}}}
Use
The Rostock Max V2 uses a tablet PC with built-in slicing software. To create a print, you just need to move your .STL file to the micro SD card which is plugged into the tablet.
The easiest way to do this is via the cloud service provided by MatterControl.
- Go to sync.mattercontrol.com
- Login with info@makeict.org / makeict!
- Find the RostockMax v2 and click "Add File to Queue"
- From the tablet itself, you can now print your STL from the queue.
For more information, visit the MatterControl Wiki
Acquisition
{{{acquisition}}}