Difference between revisions of "Woodshop Access Policy"

From MakeICT Wiki
Jump to navigationJump to search
m (Protected "Woodshop Access Policy": Rules which should only be changed after a board or membership vote ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)))
m
 
(4 intermediate revisions by 2 users not shown)
Line 1: Line 1:
−
Because of the hazardous nature of these tools, before anyone can use the tools, they must pass a regularly scheduled shop safety course that will be posted on the calendar. We want everyone to go home safe and in one piece! SAFE OPERATION of tools is top priority.
+
===Required Woodshop Authorization===
  
−
Anyone entering the shop will be required to use personal protective equipment (PPE) such as safety glasses, hearing protection, and possibly dust masks (these will be available for purchase).
+
Woodworking is hazardous by nature. In order to use any of the woodshop tools any member or nonmember must take the Woodshop Authorization course. We want everyone to go home safe and in one piece! SAFE OPERATION of tools is our top priority.
  
−
To protect machinery as well as to protect other members, only domestic lumber or veneer or WELL INSPECTED reclaimed lumber free of sand, gravel, nails, screws, staples or finish will be allowed in the shop, pressure treated lumber is hazardous and will not be allowed any time. Some people are allergic to certain lumber and have become sensitized to being near the materials, therefore no exotic lumber or veneer (such as the rosewood family, cocobolo, spalted, etc) will be allowed in the shop to protect all members. When in doubt, ask.
+
====PPE (Personal Safety Equipment)====
 +
Anyone entering the shop will be required to wear safety glasses. Use of additional PPE such as hearing protection, and dust masks is heartily encouraged.
 +
Cleanliness
 +
A clean shop is a safe and productive shop. All members and nonmembers are expected to clean after themselves while working, and thoroughly clean before leaving the area in which they’re working.  
  
−
It is HIGHLY recommended that we use a buddy system, where no single person is working in the shop without a second person in the building so that if there is an injury, somebody else is there to call for help or assist you.  
+
====Materials====
 +
Most woods are allowed in the woodshop, but to protect machinery as well as to protect other members, only WELL INSPECTED reclaimed lumber free of sand, gravel, nails, screws, staples or finish will be allowed in the shop.
 +
Pressure treated lumber will NOT be allowed ANY time.
 +
 +
 +
====Hazardous Materials Authorization====
  
−
Approved by the Board of Directors September 18, 2015.
+
Wood dust is a major safety concern, so cleanliness is of extreme importance. Some people are allergic to certain lumber. These individuals can and have become sensitized to such materials. Symptoms range from the minor problems, like Dermatitis (Skin Rash), to more serious problems, like Asthma Complication and Mucosal Irritation. Therefore, the use of woods from the following list requires additional authorization and training for proper clean-up after their use. These courses will be posted regularly to the calendar.
 +
* African Mahogonay
 +
* Jatoba “Brazilian Cherry”
 +
* Ebony
 +
* Ipe, “Brazilian Walnut”
 +
* Iroko, “African Teak”
 +
* Makore, “African Cherry”
 +
* Mansonia, “African Walnut”
 +
* MDF, Particle Board, Hardboard (Wearing of MDF spoil-boards on the Shopbot exempt)
 +
* Olivewood
 +
* Padauk
 +
* Plastics and epoxies
 +
* Purple Heart
 +
* Walnut
 +
* Wenge
 +
* Western Red Cedar
 +
 +
====ShopBot Authorization====
 +
The Shopbot operates on principles different than other woodworking machines, and requires special training. Only members who have completed the required shop bot authorization course (or any ShopBot class prior to the adoption of this authorization requirement) or been approved by an authorized instructor may use the ShopBot.
 +
 +
====Lathe Authorization====
 +
Wood-turning is a distinct branch of woodworking that operates on principles and with different risks other woodworking operations, and requires special training. Only members who have completed the required lathe authorization course (or any lathe class prior to the adoption of this authorization requirement) or been approved by an authorized instructor may use the lathes.
  
  
 +
Approved by the Board of Directors [[March_15_2018|March 15, 2018]], Modified [[Board_Meeting_2022-04-21|2022 April 21]]
 +
 +
 +
<noinclude>
 
[[Category:Rules and policies]]
 
[[Category:Rules and policies]]
 
[[Category:Access policies]]
 
[[Category:Access policies]]
 +
</noinclude>

Latest revision as of 18:23, 22 June 2022

Required Woodshop Authorization

Woodworking is hazardous by nature. In order to use any of the woodshop tools any member or nonmember must take the Woodshop Authorization course. We want everyone to go home safe and in one piece! SAFE OPERATION of tools is our top priority.

PPE (Personal Safety Equipment)

Anyone entering the shop will be required to wear safety glasses. Use of additional PPE such as hearing protection, and dust masks is heartily encouraged. Cleanliness A clean shop is a safe and productive shop. All members and nonmembers are expected to clean after themselves while working, and thoroughly clean before leaving the area in which they’re working.

Materials

Most woods are allowed in the woodshop, but to protect machinery as well as to protect other members, only WELL INSPECTED reclaimed lumber free of sand, gravel, nails, screws, staples or finish will be allowed in the shop. Pressure treated lumber will NOT be allowed ANY time.


Hazardous Materials Authorization

Wood dust is a major safety concern, so cleanliness is of extreme importance. Some people are allergic to certain lumber. These individuals can and have become sensitized to such materials. Symptoms range from the minor problems, like Dermatitis (Skin Rash), to more serious problems, like Asthma Complication and Mucosal Irritation. Therefore, the use of woods from the following list requires additional authorization and training for proper clean-up after their use. These courses will be posted regularly to the calendar.

  • African Mahogonay
  • Jatoba “Brazilian Cherry”
  • Ebony
  • Ipe, “Brazilian Walnut”
  • Iroko, “African Teak”
  • Makore, “African Cherry”
  • Mansonia, “African Walnut”
  • MDF, Particle Board, Hardboard (Wearing of MDF spoil-boards on the Shopbot exempt)
  • Olivewood
  • Padauk
  • Plastics and epoxies
  • Purple Heart
  • Walnut
  • Wenge
  • Western Red Cedar

ShopBot Authorization

The Shopbot operates on principles different than other woodworking machines, and requires special training. Only members who have completed the required shop bot authorization course (or any ShopBot class prior to the adoption of this authorization requirement) or been approved by an authorized instructor may use the ShopBot.

Lathe Authorization

Wood-turning is a distinct branch of woodworking that operates on principles and with different risks other woodworking operations, and requires special training. Only members who have completed the required lathe authorization course (or any lathe class prior to the adoption of this authorization requirement) or been approved by an authorized instructor may use the lathes.


Approved by the Board of Directors March 15, 2018, Modified 2022 April 21

Retrieved from "https://wiki.makeict.org/index.php?title=Woodshop_Access_Policy&oldid=8376"