FabLab Area

General Information

MakeICT's FabLab is an open 300 sq ft area dedicated to fabrication and rapid prototyping. Members can test ideas and concepts before moving on to more expensive materials or processes, or simply enjoy the creative process of making.

If you have any issues with FabLab equipment, please e-mail fablab@makeict.org.

Machine Access Policy

• Use of the 3D printers and the Foam Cutter require peer authorization. Visit the 3D Printing and Foam Cutter pages for details and a list of approved users.
• Use of the Laser Cutter requires attendance in an authorization workshop hosted by one of the approved instructors. Visit the Laser Cutter page for details and a list of approved users.

FabLab Area Safety

1. Do not use any machine you are not trained on and comfortable using. If at any time you are unsure of what you are doing, stop immediately and ask for help.
2. Do not use any machine that is not in good working order. Stop, unplug and leave a note on the machine and notify FabLab leadership.
3. Never assume a tool is properly adjusted; always check the tool prior to use.
4. Never modify or hack any equipment.
5. If something is wrong, leave a note in an obvious place on the troubled equipment and e-mail fablab@makeict.org.

Equipment List

Picture	What	Manufacturer	Model	Status	Expert	Resources
	3D Printer	SeeMeCNC	Rostock Max V2	Operational	Bryan Barr	MakeICT resources Rostock Max V2 External resources MatterControl Touch Wiki overview
	3D Printer	James Lancaster	RepRap Prusa Mendel	Operational	James Lancaster	MakeICT resources RepRap Prusa Mendel External resources RepRap.org source
	3D Printer	Ultimaker	Ultimaker 2	Operational	Tom McGuire Dominic Canare	MakeICT resources Ultimaker 2 External resources Overview Specs Troubleshooting
	Foam Cutter	Tom McGuire	Foam Cutting Machine	Operational	Tom McGuire Dominic Canare	Foam Cutting Machine
	Kinect	James Lancaster	Kinect Scanner	Operational	James Lancaster	Kinect Scanner
	Laser Cutter	Rabbit Laser	QX1290	Operational	Mike Doolittle Dominic Canare John Alexander	MakeICT resources Laser Cutter External resources Manuals QX1290 Specs