FabLab Area

From MakeICT Wiki
Revision as of 21:59, 21 December 2015 by Dominic Canare (talk | contribs)
Jump to navigationJump to search

General Information

MakeICT's FabLab is an open 300 sq ft area dedicated to fabrication and rapid prototyping. Here is where you can test ideas, and concepts before moving on to more expensive materials or processes. Or, simply enjoy the creative process and see what you can make. The FabLab currently houses 3D printers, foam cutter, and LASER engraver/cutter.

Per MakeICT policy, all machinery and tools require prior instruction and certification before use. We want all our members and guests to be safe, and the equipment kept in top condition so all can enjoy.

Bryan Barr is the Benevolent Dictator over the FabLab.

Mike Doolittle is the FabLab BU - backup.

Classes

Machine Access Policy

  • Use of the 3D printers and the Foam Cutter require peer certification. Visit the 3D Printing and Foam Cutter pages for details and a list of approved users.
  • Use of the Laser Cutter requires attendance in a certification workshop hosted by one of the approved instructors. Visit the Laser Cutter page for details and a list of approved users.

FabLab Area Safety

  1. Do not use any machine you are not trained on and comfortable using. If at any time you are unsure of what you are doing, stop immediately and ask for help.
  2. Do not use any machine that is not in good working order. Stop, unplug and leave a note on the machine and notify the FabLab BD OR Mike Doolittle.
  3. NEVER ASSUME A TOOL IS PROPERLY ADJUSTED. Always check the tool prior to use.
  4. NEVER MODIFY OR HACK THE 3D PRINTER, FOAM CUTTER OR LASER CUTTER.

Equipment List

Picture What Manufacturer Model Status Expert Resources
RostockBlack-V2-Front.jpg 3D Printer SeeMeCNC Rostock Max v2 Operational Bryan Barr

MakeICT resources

External resources

3D-Printer.jpg 3D Printer James Lancaster RepRap Prusa Mendel Operational James Lancaster

MakeICT resources

External resources

Ultimaker II.jpeg 3D Printer Ultimaker Ultimaker 2 Operational Tom McGuire

MakeICT resources

External resources

Foam-Cutter.jpg Foam Cutter Tom McGuire Operational Tom McGuire
Laser cutter.jpg Laser Cutter Rabbit Laser QX1290 Operational Mike Doolittle

MakeICT resources

External resources