Difference between revisions of "Laser Cutter"
From MakeICT Wiki
Jump to navigationJump to search (→Safety) |
|||
| Line 45: | Line 45: | ||
After starting the laser cutter: | After starting the laser cutter: | ||
# Before cutting make sure the air compressor and the fan motor are on | # Before cutting make sure the air compressor and the fan motor are on | ||
| + | # '''Home the head!''' | ||
| + | ::* If you do not do this, you may crash the head, which is not good. | ||
# Refer to the cutting manual for appropriate engraving and speed and power settings for varied materials | # Refer to the cutting manual for appropriate engraving and speed and power settings for varied materials | ||
# Beware of flammable materials while using the machines. | # Beware of flammable materials while using the machines. | ||
Revision as of 16:39, 21 May 2016
| Rabbit RL-80-1290 Laser engraving/cutting machine | |
|---|---|
 Rabbit Laser Cutter | |
| Technical Specifications | |
| Bed Size | 1200 x 900 mm (47.2 x 35.4 inches) |
| LASER Power | 80W |
| LASER Type | Sealed CO2 laser tube |
| Max Bed Height | ~10 inches |
| Max Cut Speed | 36,000 mm/min |
| Max Engrave Speed | 60,000 mm/min |
| Max Engrave Resolution | 1000 DPI |
| Additional Information | |
| User Manual | [[Media:|]] |
| Website | Rabbit RL-80-1290 Product Page |
Contents
About
The Laser cutter allows users to take designs created on a computer and cut and/or engrave using many diferent materials. Laser cutting is a great way to rapidly prototype projects. Interfacing with the laser cutter is performed with LaserCut v5.3.
The laser cutter does require regular cleaning and alignment. This is to be performed by trained volunteers only.
For tips and information about creating designs for the laser cutter, visit Designing for the laser cutter
Machine access policy
Use of the Laser Cutter requires attendance in a certification workshop hosted by one of the approved instructors. Workshops are posted on the calendar.
Usage
Safety
Laser cutters pose a fire hazard. A high intensity beam of laser light can produce extremely high temperatures as it comes into contact with the materials it is engraving, marking, or cutting. When using the laser cutter, remember:
- You may only use the laser cutter if you have been officially certified according to the machine access policy
- Never leave the laser cutter unattended while it was powered on (even if it is not firing)
- Never cut materials that you don't know are safe
- Never override laser cutter safeties and switches
- Know what to do if a fire happens
- Hint: Hit the big, red, emergency stop button. This will shutdown the laser and the air supply.
- A Carbon Dioxide (CO2) fire extinguisher is located next to the laser cutter
Before starting the laser cutter:
- Check the coolant window in the back of the chiller before starting any project.
- Check that the screen in the collection bin is clean and the bin is empty.
After starting the laser cutter:
- Before cutting make sure the air compressor and the fan motor are on
- Home the head!
- If you do not do this, you may crash the head, which is not good.
- Refer to the cutting manual for appropriate engraving and speed and power settings for varied materials
- Beware of flammable materials while using the machines.
Workflow
- Create design or import
If importing, unite lines (under Tools menu) - Separate layers if necessary (by changing their colors)
- Set layer modes
- Set layer speeds/powers
- Set origin (under Laser menu)
- Download
- Delete all
- Download current
- Load media into cutter
- Focus laser (in center of media)
- Move laser to origin
- Run box / test
- Close lid and start
- (when done) Home the head
- Remove media and clear debris
- Power off
Common Issues
- Edges of cut pieces are slanted, rather than straight.
- The Laser is out of alignment and needs to be adjusted. Notify the Fab Lab BD.
- Bed only travels downwards.
- The focus probe is stuck in the triggered position. Wiggle it loose and make sure nothing jammed.
- Focus probe is broken.
- There are spares in the kit in the cabinet on the left-hand side of the laser. When putting a thicker material in the cutter remember to lower the bed before moving the head.
- Fumes are not venting well.
- Make sure that the screen in the collection bin under the bed is clean.
Materials
Cutting a bad material in the laser cutter can be dangerous. Only approved materials should be cut, and banned materials should never be placed in or even around the laser cutter. Cutting an unknown material risks bodily harm and damage to equipment/facilities.
Approved materials
| Name | Notes | Warnings | |
|---|---|---|---|
Acrylic (aka Plexiglas, Lucite, PMMA) |
Cuts well, leaves a smooth polished edge. Higher powers can leave smoke/scorch marks along edges. Some people remove paper/plastic protection sheets before cutting. | ||
Cardboard |
Cuts well, can catch fire | FIRE hazard! | |
Ceramic |
Mirror surfaces can reflect the laser beam | ||
Cloth (cotton, felt, hemp) |
Cuts easily | NO plastic coated or impregnated cloth! | |
Corian |
|||
Cork |
Cuts nicely, the quality of the cut depends on the thickness and quality of the cork. Engineered cork has a lot of glue in it, may not cut nicely. | ||
Coroplast (corrugated plastic) |
Difficult to cut through cleanly, due to the ribs. Multiple passes are usually needed. | ||
Delrin |
Comes in a number of shore strengths (hardness), the harder tends to work better. Great for gears! | ||
Glass |
Has a sandblasted look, green glass works best | Mirror surfaces can reflect the laser beam | |
Leather, suede |
Leather is very hard to cut, can be if thinner than a belt thickness | ||
MDF, engineered woods |
May experience a higher amount of charring when cut | ||
Magnetic sheet |
Cuts easily | ||
Marble |
Mirror surfaces can reflect the laser beam | ||
Matte Board |
|||
Melamine |
|||
Mylar |
Works well if it's thin. Thick mylar has a tendency to warp, bubble, and curl | Gold coated mylar will not work | |
Paper, card stock |
|||
Plywood, composite woods |
Contain glue, and may not cut as well as solid wood | ||
Pressboard |
|||
NON-CHLORINE Rubber |
DO NOT CUT unless the rubber compound has been tested | Beware chlorine-containing rubber! If you're not sure, assume you've got chlorinated rubber, and don't cut it. | |
Tile |
Mirror surfaces can reflect the laser beam | ||
Wood |
Avoid oily/resinous woods | FIRE - Cutting oily woods, or very resinous woods can catch fire. | |
Wood Veneer |
Contain glue, and may not cut as well as solid wood | ||
Anodized Aluminum |
Vaporizes the anodized layer away | ||
Bare Metals |
|||
Brass |
|||
Coated Metals |
|||
Painted Metals |
Vaporizes the paint away | ||
Stainless Steel |
|||
Titanium |
Banned materials
These materials should never be processed in the laser cutter.
| Name | DANGER | WARNING |
|---|---|---|
ABS (acrylonitrile butadiene styrene) |
Emits cyanide gas and tends to melt | ABS does not cut well in a laser cutter. It tends to melt rather than vaporize, and has a higher chance of catching on fire and leaving behind melted gooey deposits on the vector cutting grid. It also does not engrave well (again, tends to melt). |
Chlorinated plastics (PVC/Poly Vinyl Chloride, vinyl/pleather/artificial leather) |
Emits pure chlorine gas when cut! | Don't ever cut this material as it will ruin the optics, cause the metal of the machine to corrode, and ruin the motion control system. Bubbles yellow, smokes alot, STINKS!!!!! |
Coated Carbon Fiber |
Emits noxious fumes | A mix of two materials. Thin carbon fiber mat can be cut, with some fraying - but not when coated |
Fiberglass |
Emits fumes | It's a mix of two materials that cant' be cut. Glass (etch, no cut) and epoxy resin (fumes) |
Galvanized metal |
Emits dangerous fumes | Zinc fumes are poisonous. Galvanized metal should never be super heated (so don't weld on it either). |
Metal |
Power needed for LASER to cut metal | |
Milk bottles/HDPE |
Catches fire and melts | It melts, gets gooey. DON'T. Someone has to clean the hex worktable. |
Mirrored surfaces |
Will not cut, reflects laser beam | Mirror surfaces can reflect the laser beam, damaging the cutter's interior components. Some mirrored materials can be placed reflective-side down and cut. |
Polycarbonate/Lexan |
Cut very poorly, disbackground-color, catch fire | Polycarbonate is often found as flat, sheet material. The window of the laser cutter is made of Polycarbonate because polycarbonate strongly absorbs infrared radiation! This is the frequency of light the laser cutter uses to cut materials, so it is very ineffective at cutting polycarbonate. Polycarbonate is a poor choice for laser cutting. |
PolyPropylene Foam |
Catches fire | Like PolyStyrene, it melts, catches fire, and the melted drops continue to burn and turn into rock-hard drips and pebbles. |
PolyStyrene Foam |
Catches fire | Like PolyPropylene. It catches fire, it melts, and only thin pieces cut. This is the #1 material that causes laser fires!!! |
Pressure treated wood |
Emits dangerous fumes | Should never be burned -- not in your fireplace, and definitely not in our LASER |
Printed circuit board (FR4 and other material types) |
Other resources
- Identifying Unknown Plastics by Make Magazine
- Beilstein test
- Polymer Identification (video) by Burnination
- Polymer Identification (PDF) by David A. Katz
- Density Column Using Recyclable Plastics
Laser Cutter Certified Users
| Name | Certification Date |
|---|---|
| Amy Dorsch | 2016-04-30 |
| Aaron Rivers | 2016-02-27 |
| Anna Lenhart-Murray | 2015-12-16 |
| Audrey Barba | 2015-12-14 |
| Bob Jackson | 2016-02-27 |
| Bonnie Thurman | 2016-03-28 |
| Brad Cooley | 2015-11-16 |
| Brian Hertz | 2015-12-18 |
| Brock Milford | 2015-12-16 |
| Bryan Barr (instructor) | 2015-08-07 |
| Cat Barba-Abay | 2015-12-16 |
| Charles Griesel | 2015-12-02 |
| Charlie Fair | 2015-11-11 |
| Chris Batcheller | 2015-12-14 |
| Chris Lofland | 2016-02-27 |
| Christy Bennett | 2016-04-30 |
| Christian Kindel | 2015-12-12 |
| Cindy Conrad | 2016-03-28 |
| Cory Kertz | 2015-11-11 |
| Coty Sandfort | 2016-04-30 |
| Curt Gridley | 2015-12-12 |
| Dana Danaver | 2015-12-05 |
| Daniel Towle | 2015-12-20 |
| David Springs | 2015-09-19 |
| Dean Day | 2015-12-12 |
| Dominic Canare (instructor) | 2015-12-02 |
| Douglas Stice | 2016-04-30 |
| Doug Wilson | 2016-03-28 |
| Dustin Richey | 2016-01-16 |
| Eric Sommer | 2016-04-30 |
| Ernest Sharp | 2016-03-28 |
| Geoffrey Kisch | 2015-12-05 |
| H. Robert Shultz | 2016-04-30 |
| Helen Haskin | 2015-12-16 |
| Ivan Quiroz | 2015-11-16 |
| James Seymour | 2015-12-12 |
| James Classen | 2015-11-11 |
| James Dorsch | 2016-04-30 |
| James Lancaster | 2015-12-05 |
| Jeremiah Loder | 2015-12-14 |
| Jerry Carpenter | 2015-08-07 |
| Jerry Shubert | 2015-11-11 |
| Jesse Lee | 2016-01-16 |
| Jim Hammer | 2015-12-12 |
| Joe Groom | 2016-04-30 |
| Joe Lobdell | 2016-02-27 |
| Joel Ewy | 2015-12-05 |
| John Alexander (instructor) | 2015-12-02 |
| John Harrison | 2015-10-30 |
| Jonny Fosnight | 2015-11-16 |
| Joseph Woolridge | 2016-03-28 |
| Judah Hansen | 2015-12-20 |
| Karyn Bell-Simon | 2016-01-16 |
| Keith Rowley | 2016-02-27 |
| Kenton Hansen | 2015-12-20 |
| Kevin Elledge | 2015-12-14 |
| Kim Lujan | 2015-12-18 |
| Kip Landwehr | 2015-12-18 |
| Larry Frank | 2016-03-28 |
| Logan Pajunen | 2015-11-11 |
| Marc Lujan | 2016-02-27 |
| Marcus Mosley | 2015-12-20 |
| Mark Esau | 2015-12-20 |
| Marty Boyzuck | 2016-02-27 |
| Matthew Pewewardy | 2016-03-28 |
| Melanie Jenney | 2015-12-14 |
| Melissa Soutiere | 2015-12-14 |
| Mike Barushok | 2015-12-18 |
| Mike Doolittle (instructor) | 2015-08-07 |
| Mike Hutton | 2015-11-11 |
| Mike McKown | 2016-04-30 |
| Mitzi Trout | 2015-12-18 |
| Nathan Huff | 2016-02-27 |
| Paul Poirier | 2016-03-28 |
| Paul Wilson | 2015-12-20 |
| Rick Boyd | 2015-12-20 |
| Sam Jossie | 2016-02-27 |
| Samuel McConnell | 2015-12-02 |
| Samuel Schurter | 2015-12-05 |
| Shawn Achenbach | 2016-02-27 |
| Skyler Lovelace | 2015-12-02 |
| Stephan Reckers | 2015-11-16 |
| Steve Owens | 2016-04-30 |
| Steve Saner | 2016-01-16 |
| Stuart Smith | 2015-12-14 |
| Tammy Arnott | 2016-02-27 |
| Terry Weatherson | 2016-01-16 |
| Thomas Bloom | 2015-12-12 |
| Tom McGuire | 2015-08-07 |
| Tyler Ball | 2016-01-16 |
| Weston Vice | 2015-12-05 |
| William Davisson | 2015-12-18 |
