Laser Cutter
From MakeICT Wiki
| Rabbit QX-80-1290 Laser engraving/cutting machine | |
|---|---|
 Rabbit Laser Cutter | |
| Technical Specifications | |
| Bed Size | 1200 x 900 mm (47.2 x 35.4 inches) |
| LASER Power | 80W |
| LASER Type | Sealed CO2 laser tube |
| Max Bed Height | ~10 inches |
| Max Cut Speed | 36,000 mm/min |
| Max Engrave Speed | 60,000 mm/min |
| Max Engrave Resolution | 1000 DPI |
| Additional Information | |
| User Manual | RL-80-1290_User_Manual.pdf |
| Website | Rabbit QX-80-1290 Product Page |
The Laser cutter cuts or engraves digital designs on a variety of materials. Laser cutting is a great way to rapidly prototype projects.
An authorization workshop, hosted by an approved instructor, is required of all members before using the laser cutter. Workshops are posted on the calendar. Peer authorization is not an approved path for use of the laser cutter.
Interfacing with the laser cutter is performed with LaserCut v5.3.
The laser cutter does require regular cleaning and alignment. This is to be performed by trained volunteers only.
Contents
Usage
Safety
Laser cutters pose a fire hazard. A high intensity beam of laser light can produce extremely high temperatures as it comes into contact with the materials it is engraving, marking, or cutting. When using the laser cutter, remember:
- You may only use the laser cutter if you have been officially authorized according to the machine access policy
- Never leave the laser cutter unattended while it was powered on (even if it is not firing)
- Never cut materials that you don't know are safe
- Never override laser cutter safeties and switches
- Know what to do if a fire happens
- Hint: Hit the big, red, emergency stop button. This will shutdown the laser and the air supply
- A Carbon Dioxide (CO2) fire extinguisher is located next to the laser cutter
Before starting the laser cutter
- Check the coolant window in the back of the chiller before starting any project
- Check that the screen in the collection bin is clean and the bin is empty
- Every time you use the LASER!
After starting the laser cutter
- Before cutting make sure the air compressor and the fan motor are on
- Home the head!
- If you do not do this, you may crash the head, which is not good
- Beware of flammable materials while using the machine
Workflow
- On any computer - Create design
- Use inkscape, autocad or other software to create a DXF file that can be imported to lasercut
- On any windows computer - Create lasercut file
- Import DXF
- Separate layers if necessary
- Tools > Unite Lines
- Set layer modes
- Set layer speeds/powers
- Set origin (under Laser menu)
- Save as ECP, with corresponding ini files
- On the laser cutter computer
- File> Open ECP in Lasercut professional version
- Confirm mode settings
- Select all
- Move design to confirm origin
- Send design to laser cutter
- Download
- Delete All
- Download Current
- Watch to make sure more than 2048 bytes are sent
- Load media into cutter
- Lower laser cutter table
- Home laser head (xy-0)
- Load media into cutter
- Move laser to center of media
- Focus at appropriate height (z-0)
- Move laser to desired origin
- Run box/test
- Close lid and start
- After cut is finished allow ~30 seconds before opening to vent smoke/fumes
When Finished
- Home the head
- Remove media and clear debris
- Power off
Common Issues
- Edges of cut pieces are slanted, rather than straight.
- The Laser is out of alignment and needs to be adjusted. Notify the Fab Lab BD.
- The head crashes when approaching the left or bottom of the bed.
- The head must be homed before starting to cut. If it isn't homed there is a risk of crashing the head, which is a bad thing.
- Bed only travels downwards.
- The focus probe is stuck in the triggered position. Wiggle it loose and make sure nothing jammed.
- Focus probe is broken.
- There are spares in the kit in the cabinet on the left-hand side of the laser. When putting a thicker material in the cutter remember to lower the bed before moving the head.
- Fumes are not venting well.
- Make sure that the screen in the collection bin under the bed is clean.
- Unexpectedly wide rotary attachment dimensions
- Machine Options > Worktable > RY axis pulse unit = .018238
Materials
Cutting a bad material in the laser cutter can be dangerous. Only approved materials should be cut, and banned materials should never be placed in or even around the laser cutter. Cutting an unknown material risks bodily harm and damage to equipment/facilities.
Approved materials
| Name | Notes | Warnings | |
|---|---|---|---|
Acrylic (aka Plexiglas, Lucite, PMMA) |
Cuts well, leaves a smooth polished edge. Higher powers can leave smoke/scorch marks along edges. Some people remove paper/plastic protection sheets before cutting. | ||
Cardboard |
Cuts well, can catch fire | FIRE hazard! | |
Ceramic |
Engraving only | Mirror surfaces can reflect the laser beam | |
Cloth (cotton, felt, hemp) |
Cuts easily | NO plastic coated or impregnated cloth! | |
Corian |
|||
Cork |
Cuts nicely, the quality of the cut depends on the thickness and quality of the cork. Engineered cork has a lot of glue in it, may not cut nicely. | ||
Coroplast (corrugated plastic) |
Difficult to cut through cleanly, due to the ribs. Multiple passes are usually needed. | ||
Delrin |
Comes in a number of shore strengths (hardness), the harder tends to work better. Great for gears! | ||
Glass |
Has a sandblasted look, #009900 glass works best | Mirror surfaces can reflect the laser beam | |
Leather, suede |
Leather is very hard to cut, can be if thinner than a belt thickness | ||
MDF, engineered woods |
May experience a higher amount of charring when cut | ||
Magnetic sheet |
Cuts easily | ||
Stone/Granite/Marble/etc. |
Engraving only | Mirror surfaces can reflect the laser beam | |
Matte Board |
|||
Melamine |
|||
Mylar |
Works well if it's thin. Thick mylar has a tendency to warp, bubble, and curl | Gold coated mylar will not work | |
Paper, card stock |
|||
Plywood, composite woods |
Contain glue, and may not cut as well as solid wood | ||
Pressboard |
|||
NON-CHLORINE Rubber |
DO NOT CUT unless the rubber compound has been tested | Beware chlorine-containing rubber! If you're not sure, assume you've got chlorinated rubber, and don't cut it. | |
Tile |
Engraving Only. | Mirror surfaces can reflect the laser beam | |
Wood |
Avoid oily/resinous woods | FIRE - Cutting oily woods, or very resinous woods can catch fire. | |
Wood Veneer |
Contain glue, and may not cut as well as solid wood | ||
Anodized Aluminum |
Engraving only. Vaporizes the anodized layer away | ||
Bare Metals |
Engraving only. | ||
Brass |
Engraving only. | ||
Coated Metals |
Engraving only. Vaporizes the coating away | ||
Painted Metals |
Engraving only. Vaporizes the paint away | ||
Stainless Steel |
Engraving only. | ||
Titanium |
Engraving only. | ||
PolyPropylene Sheet |
NOT FOAM | ||
PolyStyrene Sheet |
NOT FOAM | Tends to melt; avoid overheating. |
Banned materials
These materials should never be processed in the laser cutter.
| Name | DANGER | WARNING |
|---|---|---|
ABS (acrylonitrile butadiene styrene) |
Emits cyanide gas and tends to melt | ABS does not cut well in a laser cutter. It tends to melt rather than vaporize, and has a higher chance of catching on fire and leaving behind melted gooey deposits on the vector cutting grid. It also does not engrave well (again, tends to melt). |
Chlorinated plastics (PVC/Poly Vinyl Chloride, vinyl/pleather/artificial leather) |
Emits pure chlorine gas when cut! | Don't ever cut this material as it will ruin the optics, cause the metal of the machine to corrode, and ruin the motion control system. Bubbles yellow, smokes alot, STINKS!!!!! |
Coated Carbon Fiber |
Emits noxious fumes | A mix of two materials. Thin carbon fiber mat can be cut, with some fraying - but not when coated |
Fiberglass |
Emits fumes | It's a mix of two materials that cant' be cut. Glass (etch, no cut) and epoxy resin (fumes) |
Galvanized metal |
Emits dangerous fumes | Zinc fumes are poisonous. Galvanized metal should never be super heated (so don't weld on it either). |
Metal |
Power needed for LASER to cut metal | |
Milk bottles/HDPE |
Catches fire and melts | It melts, gets gooey. DON'T. Someone has to clean the hex worktable. |
Mirrored surfaces |
Will not cut, reflects laser beam | Mirror surfaces can reflect the laser beam, damaging the cutter's interior components. Some mirrored materials can be placed reflective-side down and cut. |
Polycarbonate/Lexan |
Cut very poorly, disbackground-color, catch fire | Polycarbonate is often found as flat, sheet material. The window of the laser cutter is made of Polycarbonate because polycarbonate strongly absorbs infrared radiation! This is the frequency of light the laser cutter uses to cut materials, so it is very ineffective at cutting polycarbonate. Polycarbonate is a poor choice for laser cutting. |
PolyPropylene Foam |
Catches fire | Like PolyStyrene, it melts, catches fire, and the melted drops continue to burn and turn into rock-hard drips and pebbles. |
PolyStyrene Foam |
Catches fire | Like PolyPropylene. It catches fire, it melts, and only thin pieces cut. This is the #1 material that causes laser fires!!! |
Pressure treated wood |
Emits dangerous fumes | Should never be burned -- not in your fireplace, and definitely not in our LASER |
Printed circuit board (FR4 and other material types) |
||
Unidentified plastics/rubbers |
If you don't know what it is, don't put it in the LASER cutter |
Other resources
On this wiki
- Designing for the laser cutter
- Category:SVG files practice shapes for first projects
- LaserCut v5.3
External links
- Identifying Unknown Plastics by Make Magazine
- Beilstein test
- Polymer Identification (video) by Burnination
- Polymer Identification (PDF) by David A. Katz
- Density Column Using Recyclable Plastics
- Thingiverse Laser Cut projects
Laser Cutter Authorized Users
To see authorized users expand this section --->
| Name | Authorization Date |
|---|---|
| Amy Dorsch | 2016-04-30 |
| Paul Sheets | 2016-05-18 |
| Aaron Rivers | 2016-02-27 |
| Anna Lenhart-Murray | 2015-12-16 |
| Audrey Barba | 2015-12-14 |
| Bob Jackson | 2016-02-27 |
| Bonnie Thurman | 2016-03-28 |
| Brad Cooley | 2015-11-16 |
| Brian Hertz | 2015-12-18 |
| Brock Milford | 2015-12-16 |
| Bryan Barr (instructor) | 2015-08-07 |
| Cat Barba-Abay | 2015-12-16 |
| Charles Griesel | 2015-12-02 |
| Charlie Fair | 2015-11-11 |
| Chris Batcheller | 2015-12-14 |
| Chris Lofland | 2016-02-27 |
| Chris Strait | 2016-05-18 |
| Christy Bennett | 2016-04-30 |
| Christian Kindel | 2015-12-12 |
| Cindy Conrad | 2016-03-28 |
| Cory Kertz | 2015-11-11 |
| Coty Sandfort | 2016-04-30 |
| Curt Gridley | 2015-12-12 |
| Dale Morrow | 2016-06-21 |
| Dana Danaver | 2015-12-05 |
| Daniel Towle | 2015-12-20 |
| David Graver | 2016-06-21 |
| David Springs | 2015-09-19 |
| Dean Day | 2015-12-12 |
| Dominic Canare (instructor) | 2015-12-02 |
| Douglas Stice | 2016-04-30 |
| Doug Wilson | 2016-03-28 |
| Dustin Richey | 2016-01-16 |
| Ed Hutson | 2016-05-18 |
| Eric Sommer | 2016-04-30 |
| Ernest Sharp | 2016-03-28 |
| Gayle Thomas | 2016-05-18 |
| Geoffrey Kisch | 2015-12-05 |
| H. Robert Shultz | 2016-04-30 |
| Helen Haskin | 2015-12-16 |
| Henry Gridley | 2016-05-18 |
| Ivan Quiroz | 2015-11-16 |
| JaiPal Chauhan | 2016-06-21 |
| James Seymour | 2015-12-12 |
| James Classen | 2015-11-11 |
| James Dorsch | 2016-04-30 |
| James Lancaster | 2015-12-05 |
| James Tennant | 2016-05-18 |
| Jeremiah Loder | 2015-12-14 |
| Jerry Carpenter | 2015-08-07 |
| Jerry Shubert | 2015-11-11 |
| Jesse Lee | 2016-01-16 |
| Jim Hammer | 2015-12-12 |
| Joe Groom | 2016-04-30 |
| Joe Lobdell | 2016-02-27 |
| Joel Ewy | 2015-12-05 |
| John Alexander (instructor) | 2015-12-02 |
| John Harrison | 2015-10-30 |
| Jonny Fosnight | 2015-11-16 |
| Joseph Woolridge | 2016-03-28 |
| Judah Hansen | 2015-12-20 |
| Julie Chen | 2016-05-18 |
| Karyn Bell-Simon | 2016-01-16 |
| Keith Rowley | 2016-02-27 |
| Kenton Hansen | 2015-12-20 |
| Kevin Elledge | 2015-12-14 |
| Kim Lujan | 2015-12-18 |
| Kip Landwehr | 2015-12-18 |
| Kyle McCormick | 2016-05-18 |
| Larry Frank | 2016-03-28 |
| Logan Pajunen | 2015-11-11 |
| Marc Lujan | 2016-02-27 |
| Marc Roths | 2016-06-21 |
| Marcus Mosley | 2015-12-20 |
| Mark Esau | 2015-12-20 |
| Mark Reuter | 2016-05-18 |
| Marty Boyzuck | 2016-02-27 |
| Matthew Pewewardy | 2016-03-28 |
| Melanie Jenney | 2015-12-14 |
| Melissa Soutiere | 2015-12-14 |
| Michael Grudowski | 2016-05-18 |
| Mike Barushok | 2015-12-18 |
| Mike Doolittle (instructor) | 2015-08-07 |
| Mike Hutton | 2015-11-11 |
| Mike McKown | 2016-04-30 |
| Mitzi Trout | 2015-12-18 |
| Nathan Huff | 2016-02-27 |
| Paul Poirier | 2016-03-28 |
| Paul Wilson | 2015-12-20 |
| Rick Boyd | 2015-12-20 |
| Sam Jossie | 2016-02-27 |
| Samuel McConnell | 2015-12-02 |
| Samuel Schurter | 2015-12-05 |
| Shawn Achenbach | 2016-02-27 |
| Skyler Lovelace | 2015-12-02 |
| Stephan Reckers | 2015-11-16 |
| Steve Owens | 2016-04-30 |
| Steve Saner | 2016-01-16 |
| Stuart Smith | 2015-12-14 |
| Tammy Arnott | 2016-02-27 |
| Terry Weatherson | 2016-01-16 |
| Thomas Bloom | 2015-12-12 |
| Tom McGuire | 2015-08-07 |
| Turquoise Thomas | 2016-06-21 |
| Tyler Ball | 2016-01-16 |
| Valerie Lillich | 2016-06-21 |
| Weston Vice | 2015-12-05 |
| William Davisson | 2015-12-18 |
| Aaron Weaver | 2016-06-15 |
| Adam Wiley | 2016-06-15 |
| Alex Kern | 2016-06-15 |
| Alexander Melton | 2016-06-15 |
| Bruce Barley | 2016-06-15 |
| Holly Arnold | 2016-06-15 |
| Jake Ferrell | 2016-06-15 |
| Jared Stafford | 2016-06-15 |
| Jess Bechtelheimer | 2016-06-15 |
| John Clark | 2016-06-15 |
| Kurt Hershey | 2016-06-15 |
| Larame Cline | 2016-06-15 |
| Larry Roth | 2016-06-15 |
| Larry Wynn | 2016-06-15 |
| Michele Pugh | 2016-06-15 |
| Mike Arnold | 2016-06-15 |
| Mike Brennison | 2016-06-15 |
| Resha Parajuli | 2016-06-15 |
| Stuart Smith | 2016-06-15 |
| Tim Otter | 2016-06-15 |
