Woodshop Area

General Information

MakeICT's woodshop consists of 2 rooms dedicated to wood working.

Aaron Rivers is the Area Lead over the woodshop.

The goal of the shop space is to encourage safe, continued learning of the skills needed to further your knowledge of woodworking!

Woodworking Terminology Glossary

• Popular Woodworking Magazine

• Wood Magazine

Machine Access Policy

Required Woodshop Authorization

Woodworking is hazardous by nature. In order to use any of the woodshop tools any member or nonmember must take the Woodshop Authorization course. We want everyone to go home safe and in one piece! SAFE OPERATION of tools is our top priority.

PPE (Personal Safety Equipment)

Anyone entering the shop will be required to wear safety glasses. Use of additional PPE such as hearing protection, and dust masks is heartily encouraged. Cleanliness A clean shop is a safe and productive shop. All members and nonmembers are expected to clean after themselves while working, and thoroughly clean before leaving the area in which they’re working.

Materials

Most woods are allowed in the woodshop, but to protect machinery as well as to protect other members, only WELL INSPECTED reclaimed lumber free of sand, gravel, nails, screws, staples or finish will be allowed in the shop. Pressure treated lumber will NOT be allowed ANY time.

Hazardous Materials Authorization

Wood dust is a major safety concern, so cleanliness is of extreme importance. Some people are allergic to certain lumber. These individuals can and have become sensitized to such materials. Symptoms range from the minor problems, like Dermatitis (Skin Rash), to more serious problems, like Asthma Complication and Mucosal Irritation. Therefore, the use of woods from the following list requires additional authorization and training for proper clean-up after their use. These courses will be posted regularly to the calendar.

• African Mahogonay
• Jatoba “Brazilian Cherry”
• Ebony
• Ipe, “Brazilian Walnut”
• Iroko, “African Teak”
• Makore, “African Cherry”
• Mansonia, “African Walnut”
• MDF, Particle Board, Hardboard (Wearing of MDF spoil-boards on the Shopbot exempt)
• Olivewood
• Padauk
• Plastics and epoxies
• Purple Heart
• Walnut
• Wenge
• Western Red Cedar

ShopBot Authorization

The Shopbot operates on principles different than other woodworking machines, and requires special training. Only members who have completed the required shop bot authorization course (or any ShopBot class prior to the adoption of this authorization requirement) or been approved by an authorized instructor may use the ShopBot.

Lathe Authorization

Wood-turning is a distinct branch of woodworking that operates on principles and with different risks other woodworking operations, and requires special training. Only members who have completed the required lathe authorization course (or any lathe class prior to the adoption of this authorization requirement) or been approved by an authorized instructor may use the lathes.

Approved by the Board of Directors March 15, 2018, Modified 2022 April 21

Specific Tools

Please use the DeWalt DWV012 HEPA tool actuated dust extractor for capturing sanding dust connected to sanders to gather the fine sanding dust at the source, it is not a shop vacuum.

General Shop Safety

1. Do not use any machine you are not trained on and comfortable using. If at any time you are unsure of what you are doing, stop immediately and ask for help. Do not force tools.
2. Do not use any machine that is not in good working order. Stop, unplug, lock out, email or text the area lead aaron.rivers@makeict.org (the lead's cell number is written on the milling room chalk board)and leave a note on the machine and notify the Woodshop Lead.
3. NEVER ASSUME A TOOL IS PROPERLY ADJUSTED. Always check the tool prior to use.
4. Use all available dust collection.
5. Wear safety glasses at all times when in the shop area, including near the machine shop.
6. Ear protection is also recommended, many of the tools operate above 90 decibels and without protection, you are losing hearing.
7. When using power tools (including hand power tools):
   • No open-toed shoes or loose clothing (remove drawstrings)
   • Remove objects on hands and wrists (including rings, bracelets, & watches)
   • Remove dangly necklaces, hair ornaments, and earrings
   • Restrain long hair to prevent entanglement
   • Do not wear gloves when operating machinery
8. While hand tools are safer than most power tools, they are the cause of most workshop injuries. Make sure all hand tools are sharp and in good condition. Be certain that you know how to use these tools in a way that is safe, effective, and will not damage the tool.
9. Do not leave machines running unattended.
10. Never talk to or disturb anyone operating power tools. If you must talk to an operator wait until the operator notices you.
11. Be aware of the work going on around you. Do not accidentally bump into another person or their materials while they are working.
12. Most shop accidents are caused by working tired, rushed or distracted. As you get more experience, you will learn to listen to the little voice in the back of your mind that says, you probably shouldn't do that. Stop and think, there is usually a safer way of performing that function. These machines do not have a brain, please use yours!

Woodshop Specific Safety

1. All powered woodcutting and sanding tools must be run with dust collection or vacuum equipment connected to the appropriate ports and on at all times. Do not switch the dust collector on and off without time to cool, if you are planning on working with multiple tools, leave the collector on (repeated quickly turning on and off will overheat the motor).
2. Smoke or sparks are bad signs in the woodshop. Stop what you are doing and correct the problem. Usually correct feed and depth of cut or getting a sharp bit / blade will help.
3. No metal cutting allowed on woodshop equipment.
4. No wet or damp items of any type (including drink containers, rags, or hands) may be placed or left on machine surfaces as they will corrode.
5. Do not lean or sit on machinery, these are precision pieces of equipment and you can mis-align them.
6. You are responsible for cleaning your machines, your work space, and putting all tools away immediately after use. Scrap wood should be placed in designated locations. Use vacuums or hand brushes to clean machinery.
7. Users who consistently fail in their clean-up responsibilities may be denied shop access.
8. Do not use stationary equipment work surfaces for sanding, project assembly, layout, applying finishes, etc. Or for uses other than their intended purpose.
9. Make sure machines are in the “off” position and motion has stopped, before leaving them after use.
10. All safety guards must be kept in place while operating equipment. If a guard or safety device is an impediment to safe operation of a machine - ask for help.
11. Use equipment only for its intended use.
12. If you have made an adjustment to a piece of equipment, return it to its normal position after you are done.
13. Make sure the machine’s work surface is unobstructed and clean before use.
14. Always be aware of the proximity of moving machine parts to body parts - fingers.
15. Defects in the wood can be dangerous. Check the stock carefully for knots, splits, and other defects.
16. Keep the machine clean. Remove all tools, lumber, and unnecessary materials.
17. Objects left on the machine can vibrate into revolving cutters. They can then be thrown from the machine with great force. Never clean a machine while it is running.
18. All guests are the responsibility of the member, guests are not allowed to use equipment, unless authorized. This is a working shop, so children less than 9 years old are not allowed for safety.
19. DO NOT cut anything conductive such as mirrored acrylic, carbon based materials, or laser cutter waste on the Saw Stop tablesaw, the charred areas are carbon and because carbon is conductive, will set off the brake cartridge.
20. Member will be responsible for replacing the blade and Sawstop brake if the brake is fired for anything other than a true safety firing. If it is a true safety firing, we will need a photo of the fresh wound and SawStop will evaluate the recorded cartridge memory. If SawStop deems it to be a safety firing, they will need the photo and a release for marketing use and they send a replacement cartridge.

This is a video on table saw kickback. Do not try this in the woodshop!

Equipment List

Picture	What	Manufacturer	Model	Power	Status
	10" Cabinet Table Saw	Saw Stop	Professional PCS31230	220	Operational
	8 In. Super Stacked Dado Set 8 x 24 Tooth 1/4" to 29/32“	Freud	SD508	NA	Operational
	8" Carbide Helical Head Jointer	Shop Fox	W1741S	220	Operational
	15" Carbide Helical Head Planer	Jet	JWP-15HH	220	Operational
	17" Drill Press with laser	Jet	JDP-17DX	110	Operational
	Oscillating Spindle Sander	Jet	JBOS-5	110	Operational
	Low Speed 8" Bench Grinder	Jet	JWBG-8	110	Operational
	Tool Sharpener	Work Sharp	WS3000	110	Operational
	8" Buffer for Honing	Central Machinery	40668	110	Operational
	Granite Surface Plate for Sharpening	9" x 12" x 2" A Grade	Granite Surface Plate	NA	Operational
	Cyclone Dust Collector	Oneida Air	5HP Super Dust Gorilla	220	Operational
	3-speed Remote Control Shop Ambient Dust Filter	Jet	AFS-1000B	110	Operational
	20" Scroll Saw	Dewalt	DW788	110	Operational
	16" Two speed Scroll Saw	Delta	40-560, TY II	110	Operational
	T-slot Jigsaw	DeWalt	DW331K	110	Operational
	Jigsaw	Skil	4480	110	Operational
	"Biscuit Cutter" Plate Jointer	Porter Cable	557	110	Operational
	2.25HP Router	Bosch	1617EVSPK	110	Operational
	1.25HP Fixed Base/Plunge Base Router	DeWalt	DWP611PK	110	Operational
	1HP Router	Bosch	Colt	110	Operational
	12" Dovetail Jig / Advanced Supplemental Manual	Porter Cable	4212	Manual	Operational
	Multi-Max Oscillating Tool	Dremel	MM30	110	Operational
	2" 18Gauge Finish Nailer	Hitachi	NT50AE2	Air	Operational
	18 Gauge 5/8-1-1/4" Brad Nailer	Porter Cable	BN125A	Air	Operational
	2HP Air Compressor	Sears	20 Gallon	220V	Operational
	Router Table	Rockler		NA	Operational
	Router Table with JessEm Lift	Porter Cable	7518	110	Operational
	12" Single Bevel Miter Saw	Dewalt	DW715	110	Operational
	6x48" Belt/12" Disc sander	Powermatic	30b	110	Operational
	4x36" Belt/5" Disc sander	Delta	31-460	110	Operational
	10 gallon HEPA Tool Actuated Self-cleaning Dust Extractor	DeWalt	DWV012	110	Operational
	5 inch 8-hole hook and loop Random Orbit Sander	Porter Cable	382	110	Operational
	5” 8-hole hook and loop random orbit sander	DeWalt	DWE6421K	110	Operational
	5" 8-Hole variable speed random orbit sander	Bosch	1295DVS	110	Operational
	5" 8-Hole Hook & Loop Random Orbit Sander	Craftsman	315.279870	110	Operational
	1/4 Sheet Finish Sander	Porter Cable	330 Speed Bloc	110	Operational
	1x30 Belt/5 Disc sander	Dremel	1731	110	Operational
	14" Bandsaw 93-1/2 inch blade	Shop Fox	W1706 14" Enclosed Base	110	Operational
	17" Bandsaw Extreme Series 131-1/2 inch blade	Grizzly	G0513X2	220	Operational
	12x43 Electronic Variable Speed Wood Lathe	Jet	1221VS with extension	110	Operational
	1X8TPI Wood Lathe Chuck	Oneway	Talon	manual	Operational
	Variable Speed 8"x11" Mini Wood Lathe	Teknatool	Nova Mercury	110	Operational
	4'x 8' 3 Axis Shopbot CNC Router	ShopBot	PRT 96	110	Operational
	24" (qty 2) & 40" (qty 2) & 48" (qty 2) Clamps	Jorgensen	Cabinet Master Clamps	manual	Operational
	24" (qty 4) & 31" (qty 2) Clamps	Jet	Parallel Clamps	manual	Operational
	30 piece assortment Clamps	Bessey	Tradesman Clamps	manual	Operational
	Deep reach (qty 2) Clamps	Bessey	Tradesman Clamps	manual	Operational
	Deep reach 12" (qty 2) & 24" (qty 7) 36" (qty 2) Clamps	Masterforce	Clamps	manual	Operational
	Quick Grip 6" (qty 8) Clamps	Irwin	Clamps	manual	Operational
	High Tension Strap Clamp	Bessey	VSC	manual	Operational
	Kreg Jig Pocket Hole Kit	Kreg	K5	manual	Operational
	Diamond sharpening stones	DMT	6" x2" fine and extra-fine	manual	Operational
	Detail diamond honing kit	DMT	course, fine and extra-fine D2K	manual	missing from the shop
	Tablesaw Tenon Jig (Multi-axis)	Shop Fox	D3246	manual	Operational
	20V cordless ½” drill/driver and Impactor set	DeWalt	DCK280C2	1.5Ah battery	Operational
	20V Brushless ½” drill/driver and Impactor set	DeWalt	DCK283D2	1.5Ah battery	Operational
	9 Gallon Shop Vacuum	Ridgid	WD09450	110	Operational
	30 Gallon Flammable Liquid Storage Cabinet]]	Eagle	1932	Manual	Operational

Commercial Sources for Wood

Purchasing hardwood lumber is very different from purchasing construction lumber. Note that Hardwood Lumber is a botanical term and is not related to the relative hardness of the wood. Hardwoods shed their leaves in the fall. Softwoods are evergreen. That is a general rule, and there are exceptions. Note also that Balsa and Basswood are classified as Hardwoods.

See Wikipedia for more detail on terms, definitions, and practices involved in purchasing hardwoods in the US.

---

River City Sawmill

• (316) 617-3771
• Eric Means is a Member of MakeICT.

Richard's Wood Shop

• (316) 200-0512
• 147 N Oliver Ave, Kechi, KS 67067

Elderslie Woodworks

• (316) 351-2250
• 3501 E 101st Street N, Valley Center, KS 67147
• By Appointment

Star Lumber

• Main number: (316) 942-2221 (Option 4)
• Yard Number: (316) 941-0144
• 3700 W Irving St, Wichita, KS 67213
• Hard Wood Stock
• Best Directions is West St. S of Kellogg take Irving East to the Yard. Irving is the street on the North side of Maximum Outdoor Equipment.

Mark Frieden Lumber

• 3462 Delaware Rd., Pomona, KS 66076

Intermountain Woods

• (801) 486-5414
• Wichita Location is closed, but they will service Wichita from other locations