Difference between revisions of "Woodshop Area"

From MakeICT Wiki
Jump to navigationJump to search
 
(51 intermediate revisions by 11 users not shown)
Line 1: Line 1:
−
== General Information ==
+
==General Information==
−
MakeICT's woodshop is an enclosed 32'x36' (1152 sq ft) air conditioned area dedicated to wood working.
+
The MakeICT Woodshop endeavors to empower members to engage in a variety of woodworking traditions safely, and productively.
  
−
[[User:Mike Hutton|Mike Hutton]] is the Area Lead (formerly Benevolent Dictator) over the woodshop.
+
MakeICT's woodshop consists of 2 rooms dedicated to wood working. Our first room is outfitted with a robust core of stationary machines for preparing, cutting to size, joining, and shaping lumber. Our second room is geared towards refinement with an assortment of stationary and hand tools for drilling, cutting, joining, and assembling projects; the second room is also home to our Lathes and ShopBot CNC Machine.  
  
−
The goal of the shop space is to encourage safe, continued learning of the skills needed to further your knowledge of woodworking!
+
Lead: Aaron Rivers
 +
 
 +
Woodworking Terminology Glossary
  
−
== Woodworking Terminology Glossary ==
 
 
*[http://www.popularwoodworking.com/tools/woodworking-glossary Popular Woodworking Magazine]
 
*[http://www.popularwoodworking.com/tools/woodworking-glossary Popular Woodworking Magazine]
  
 
*[http://www.woodmagazine.com/woodworking-tips/techniques/skills/glossary-of-wood-words Wood Magazine]
 
*[http://www.woodmagazine.com/woodworking-tips/techniques/skills/glossary-of-wood-words Wood Magazine]
  
−
== Machine Access Policy ==
+
==Machine Access Policy==
−
''Approved by the Board of Directors September 18, 2015''
+
{{:Woodshop_Access_Policy}}
 +
==General Shop Safety==
  
−
Because of the hazardous nature of these tools, before anyone can use the tools, they must pass a regularly scheduled shop safety course that will be posted on the calendar.  We want everyone to go home safe and in one piece! SAFE OPERATION of tools is top priority.
+
#Do not use any machine you are not trained on and comfortable using. If at any time you are unsure of what you are doing, stop immediately and ask for help. Do not force tools.
 +
#Do not use any machine that is not in good working order. Stop, unplug, lock out, email or text the area lead aaron.rivers@makeict.org (the lead's cell number is written on the milling room chalk board)and leave a note on the machine and notify the Woodshop Lead.
 +
#NEVER ASSUME A TOOL IS PROPERLY ADJUSTED. Always check the tool prior to use.
 +
#Use all available dust collection.
 +
#Wear safety glasses at all times when in the shop area, including near the machine shop.
 +
#Ear protection is also recommended, many of the tools operate above 90 decibels and without protection, you are losing hearing.
 +
#When using power tools (including hand power tools):
 +
#*No open-toed shoes or loose clothing (remove drawstrings)
 +
#*Remove objects on hands and wrists (including rings, bracelets, & watches)
 +
#*Remove dangly necklaces, hair ornaments, and earrings
 +
#*Restrain long hair to prevent entanglement
 +
#*Do not wear gloves when operating machinery
 +
#While hand tools are safer than most power tools, they are the cause of most workshop injuries. Make sure all hand tools are sharp and in good condition. Be certain that you know how to use these tools in a way that is safe, effective, and will not damage the tool.
 +
#Do not leave machines running unattended.
 +
#Never talk to or disturb anyone operating power tools. If you must talk to an operator wait until the operator notices you.
 +
#Be aware of the work going on around you. Do not accidentally bump into another person or their materials while they are working.
 +
#Most shop accidents are caused by working tired, rushed or distracted.  As you get more experience, you will learn to listen to the little voice in the back of your mind that says, you probably shouldn't do that. Stop and think, there is usually a safer way of performing that function. These machines do not have a brain, please use yours!
  
−
Anyone entering the shop will be required to use personal protective equipment (PPE) such as safety glasses, hearing protection, and possibly dust masks (these will be available for purchase).
+
==Woodshop Specific Safety==
−
 
 
−
To protect machinery as well as to protect other members, only domestic lumber or veneer or WELL INSPECTED reclaimed lumber free of sand, gravel, nails, screws, staples or finish will be allowed in the shop, pressure treated lumber is hazardous and will not be allowed any time.  Some people are allergic to certain lumber and have become sensitized to being near the materials, therefore no exotic lumber or veneer (such as the rosewood family, cocobolo, spalted, etc) will be allowed in the shop to protect all members.  When in doubt, ask.
 
−
 
 
−
Please use the DeWalt DWV012 HEPA tool actuated dust extractor for capturing sanding dust connected to sanders to gather the fine sanding dust at the source, it is not a shop vacuum.
 
−
 
 
−
It is HIGHLY recommended that we use a buddy system, where no single person is working in the shop without a second person in the building so that if there is an injury, somebody else is there to call for help or assist you.
 
  
−
==General Shop Safety==
+
#All powered woodcutting and sanding tools must be run with dust collection or vacuum equipment connected to the appropriate ports and on at all times.  Do not switch the dust collector on and off without time to cool, if you are planning on working with multiple tools, leave the collector on (repeated quickly turning on and off will overheat the motor).
−
# Do not use any machine you are not trained on and comfortable using. If at any time you are unsure of what you are doing, stop immediately and ask for help. Do not force tools.
+
#Smoke or sparks are bad signs in the woodshop. Stop what you are doing and correct the problem. Usually correct feed and depth of cut or getting a sharp bit / blade will help.
−
# Do not use any machine that is not in good working order. Stop, unplug and leave a note on the machine and notify the woodshop BD.
+
#No metal cutting allowed on woodshop equipment.
−
# NEVER ASSUME A TOOL IS PROPERLY ADJUSTED. Always check the tool prior to use.
+
#No wet or damp items of any type (including drink containers, rags, or hands) may be placed or left on machine surfaces as they will corrode.
−
# Wear safety glasses at all times when in the shop area, including near the machine shop.
+
#Do not lean or sit on machinery, these are precision pieces of equipment and you can mis-align them.
−
# Ear protection is also recommended, many of the tools operate above 90 decibels and without protection, you are losing hearing.
+
#You are responsible for cleaning your machines, your work space, and putting all tools away immediately after use. Scrap wood should be placed in designated locations. Use vacuums or hand brushes to clean machinery.
−
# When using power tools (including hand power tools):
+
#Users who consistently fail in their clean-up responsibilities may be denied shop access.
−
#* No open-toed shoes or loose clothing (remove drawstrings)
+
#Do not use stationary equipment work surfaces for sanding, project assembly, layout, applying finishes, etc. Or for uses other than their intended purpose.
−
#* Remove objects on hands and wrists (including rings, bracelets, & watches)
+
#Make sure machines are in the “off” position and motion has stopped, before leaving them after use.
−
#* Remove dangly necklaces, hair ornaments, and earrings
+
#All safety guards must be kept in place while operating equipment. If a guard or safety device is an impediment to safe operation of a machine - ask for help.
−
#* Restrain long hair to prevent entanglement
+
#Use equipment only for its intended use.
−
#* Do not wear gloves when operating machinery
+
#If you have made an adjustment to a piece of equipment, return it to its normal position after you are done.
−
# While hand tools are safer than most power tools, they are the cause of most workshop injuries. Make sure all hand tools are sharp and in good condition. Be certain that you know how to use these tools in a way that is safe, effective, and will not damage the tool.
+
#Make sure the machine’s work surface is unobstructed and clean before use.
−
# Do not leave machines running unattended.
+
#Always be aware of the proximity of moving machine parts to body parts - fingers.
−
# Never talk to or disturb anyone operating power tools. If you must talk to an operator wait until the operator notices you.
+
#Defects in the wood can be dangerous. Check the stock carefully for knots, splits, and other defects.
−
# Be aware of the work going on around you. Do not accidentally bump into another person or their materials while they are working.
+
#Keep the machine clean. Remove all tools, lumber, and unnecessary materials.
−
# Most shop accidents are caused by working tired, rushed or distracted.  As you get more experience, you will learn to listen to the little voice in the back of your mind that says, you probably shouldn't do that.  Stop and think, there is usually a safer way of performing that function. These machines do not have a brain, please use yours!
+
#Objects left on the machine can vibrate into revolving cutters. They can then be thrown from the machine with great force. Never clean a machine while it is running.
−
 
+
#All guests are the responsibility of the member, guests are not allowed to use equipment, unless authorized.  This is a working shop, so children less than 9 years old are not allowed for safety.
−
==Woodshop Specific Safety==
+
#DO NOT cut anything conductive such as mirrored acrylic, carbon based materials, or laser cutter waste on the Saw Stop tablesaw, the charred areas are carbon and because carbon is conductive, will set off the brake cartridge.
−
# All powered woodcutting and sanding tools must be run with dust collection or vacuum equipment connected to the appropriate ports and on at all times.  Do not switch the dust collector on and off without time to cool, if you are planning on working with multiple tools, leave the collector on (repeated quickly turning on and off will overheat the motor).
+
#Member will be responsible for replacing the blade and Sawstop brake if the brake is fired for anything other than a true safety firing.  If it is a true safety firing, we will need a photo of the fresh wound and SawStop will evaluate the recorded cartridge memory.  If SawStop deems it to be a safety firing, they will need the photo and a release for marketing use and they send a replacement cartridge.
−
# Smoke or sparks are bad signs in the woodshop. Stop what you are doing and correct the problem. Usually correct feed and depth of cut or getting a sharp bit / blade will help.
 
−
# No metal cutting allowed on woodshop equipment.
 
−
# No wet or damp items of any type (including drink containers, rags, or hands) may be placed or left on machine surfaces as they will corrode.
 
−
# Do not lean or sit on machinery, these are precision pieces of equipment and you can mis-align them.
 
−
# You are responsible for cleaning your machines, your work space, and putting all tools away immediately after use. Scrap wood should be placed in designated locations. Use vacuums or hand brushes to clean machinery.
 
−
# Users who consistently fail in their clean-up responsibilities may be denied shop access.
 
−
# Do not use stationary equipment work surfaces for sanding, project assembly, layout, applying finishes, etc. Or for uses other than their intended purpose.
 
−
# Make sure machines are in the “off” position and motion has stopped, before leaving them after use.
 
−
# All safety guards must be kept in place while operating equipment. If a guard or safety device is an impediment to safe operation of a machine - ask for help.
 
−
# Use equipment only for its intended use.
 
−
# If you have made an adjustment to a piece of equipment, return it to its normal position after you are done.
 
−
# Make sure the machine’s work surface is unobstructed and clean before use.
 
−
# Always be aware of the proximity of moving machine parts to body parts - fingers.
 
−
# Defects in the wood can be dangerous. Check the stock carefully for knots, splits, and other defects.  
 
−
# Keep the machine clean. Remove all tools, lumber, and unnecessary materials.
 
−
# Objects left on the machine can vibrate into revolving cutters. They can then be thrown from the machine with great force. Never clean a machine while it is running.
 
−
# All guests are the responsibility of the member, guests are not allowed to use equipment.  This is a working shop, so children less than 7 years old are not allowed for safety.
 
−
# DO NOT cut anything conductive such as mirrored acrylic, carbon based materials, or laser cutter waste on the Saw Stop tablesaw, the charred areas are carbon and because carbon is conductive, will set off the brake cartridge.
 
−
# Member will be responsible for replacing the blade and Sawstop brake if the brake is fired for anything other than a true safety firing.  If it is a true safety firing, we will need a photo of the fresh wound and SawStop will evaluate the recorded cartridge memory.  If SawStop deems it to be a safety firing, they will need the photo and a release for marketing use and they send a replacement cartridge.
 
  
 
[https://www.youtube.com/watch?v=u7sRrC2Jpp4 This is a video on table saw kickback].  Do not try this in the woodshop!
 
[https://www.youtube.com/watch?v=u7sRrC2Jpp4 This is a video on table saw kickback].  Do not try this in the woodshop!
  
−
== Equipment List ==
+
==Equipment List==
 
<onlyinclude>
 
<onlyinclude>
−
{| class="wikitable sortable" ! data-sort-type="Tool"|
+
{| class="wikitable sortable" data-sort-type="Tool" ! |
 
|-
 
|-
−
! Picture !! What !! Manufacturer !! Model !! Power !! Status !! Expert
+
!Picture!!What!!Manufacturer!!Model!!Power!!Status
 
|-
 
|-
−
| [[File:Sawstop.jpg|200px]] || [http://www.sawstop.com/images/uploads/manuals/PCS%20Owners%20Manual%20Model%20PCS31230%20V5.0%2009-13.pdf 10" Cabinet Table Saw] || Saw Stop || Professional PCS31230 || 220 || Operational || [[User:Mike Hutton|Mike Hutton]]
+
|[[File:Sawstop.jpg|200px]]||[http://www.sawstop.com/images/uploads/manuals/PCS%20Owners%20Manual%20Model%20PCS31230%20V5.0%2009-13.pdf 10" Cabinet Table Saw]||Saw Stop||Professional PCS31230||220||Operational
 
|-
 
|-
−
| [[File:freud_SD508.jpg|200px]] || 8 In. Super Stacked Dado Set 8 x 24 Tooth 1/4" to 29/32“||Freud || SD508|| NA|| Operational || [[User:Mike Hutton|Mike Hutton]]
+
|[[File:Shopfox_jointer.jpg|200px]]||[http://pics.woodstockint.com/manuals/w1741s_m.pdf 8" Carbide Helical Head Jointer]||Shop Fox||W1741S||220||Operational
 
|-
 
|-
−
| [[File:Shopfox_jointer.jpg|200px]] || [http://pics.woodstockint.com/manuals/w1741s_m.pdf 8" Carbide Helical Head Jointer] || Shop Fox || W1741S || 220 || Operational || [[User:Mike Hutton|Mike Hutton]]
+
|[[File:Jet_jwp-15hh.jpg|200px]]||[http://content.jettools.com/assets/manuals/708538_man_EN.pdf 15" Carbide Helical Head Planer]||Jet||JWP-15HH||220||Operational
 
|-
 
|-
−
| [[File:Jet_jwp-15hh.jpg|200px]] || [http://content.jettools.com/assets/manuals/708538_man_EN.pdf 15" Carbide Helical Head Planer] || Jet || JWP-15HH || 220 || Operational || [[User:Mike Hutton|Mike Hutton]]
+
|[[File:g0513x2.jpg|200px]]||[[Media:G0513x2 manual.pdf|17" Bandsaw Extreme Series 131-1/2 inch blade]]||Grizzly||G0513X2||220||Operational
 
|-
 
|-
−
| [[File:Jet_jdp-17dx.jpg|200px]] || [[media:17inchDrillPressManual.pdf|17" Drill Press with laser]] || Jet || JDP-17DX || 110 || Operational || [[User:Mike Hutton|Mike Hutton]]
+
|[[File:W1706.jpg|200px]]||[[Media:W1706 manual.pdf|14" Bandsaw 93-1/2 inch blade]]||Shop Fox||W1706 14" Enclosed Base||110||Operational
−
|-
 
−
| [[File:Jet_jbos-5.jpg|200px]] || [http://content.jettools.com/assets/manuals/708404_man_EN.pdf Oscillating Spindle Sander] || Jet || JBOS-5 || 110 || Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File:jet_jwbg-8.jpg|200px]] || [http://content.jettools.com/assets/manuals/726100_man_EN.pdf Low Speed 8" Bench Grinder] || Jet || JWBG-8 || 110 || Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File:worksharp_ws3000.jpg|200px]] || [http://www.worksharptools.com/media/mconnect_uploadfiles/p/p/pp0002326_rev_2_ws3000_tri-ling_users_guide.pdf Tool Sharpener] || Work Sharp || WS3000 || 110 || Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File:buffer.jpg|200px]] || [[media:8 inch buffer manual.pdf|8" Buffer for Honing]] || Central Machinery || 40668 || 110 || Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File:granite.jpg|200px]] || Granite Surface Plate for Sharpening ||9" x 12" x 2" A Grade  || Granite Surface Plate|| NA|| Operational || [[User:Mike Hutton|Mike Hutton]]
 
 
|-
 
|-
  
−
| [[File:OneidaDustGorilla.jpg|150px]] || [http://www.oneida-air.com/pdf/super-dust-gorilla-owners-manual-cmbn-2014-web.pdf Cyclone Dust Collector] || Oneida Air || 5HP Super Dust Gorilla || 220 || Operational || [[User:Mike Hutton|Mike Hutton]]
+
|[[File:OneidaDustGorilla.jpg|150px]]||[http://www.oneida-air.com/pdf/super-dust-gorilla-owners-manual-cmbn-2014-web.pdf Cyclone Dust Collector]||Oneida Air||5HP Super Dust Gorilla||220||Operational
−
|-
 
−
| [[File:AFS-1000B.jpg|200px]] || [[media:AFS-1000B_manual.pdf|3-speed Remote Control Shop Ambient Dust Filter]] || Jet || AFS-1000B || 110 || Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
 
 
−
| [[File:DwaltDW788.jpg|200px]] || [[media:383329-00,DW788.pdf|20" Scroll Saw]] || Dewalt || DW788 || 110 || Operational|| [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File:delta_40-560.jpg|200px]] || [[media:Delta40-560_manual.pdf|16" Two speed Scroll Saw]] || Delta|| 40-560, TY II || 110 || Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File: DW331K.jpg|200px]] || [[media: DW331K _manual.pdf|T-slot Jigsaw]] || DeWalt || DW331K || 110 || Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File:Skil_4480.jpg|200px]] || [[media:Skil_4480_manual.pdf|Jigsaw]] || Skil||  4480|| 110 || Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File:PC-557.jpg|200px]] || [[media:PC557_manual.pdf|"Biscuit Cutter" Plate Jointer]] || Porter Cable|| 557|| 110 || Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File:BoschRouter.png|200px]] || [[media:BoschRouterManual.pdf|2.25HP Router]] || Bosch || 1617EVSPK || 110 || Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File: DWP611PK.jpg|200px]] || [[media: DWP611PK_manual.pdf|1.25HP Fixed Base/Plunge Base Router]] || DeWalt || DWP611PK || 110 || Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File:Bosch_colt_router.png|200px]] || [[media:Bosch_colt_manual.pdf|1HP Router]] || Bosch || Colt || 110 || Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File:dremel_MM30.jpg|200px]] || [[media:MM30_manual.pdf|Multi-Max Oscillating Tool]] || Dremel || MM30 || 110 || Operational || [[User:Mike Hutton|Mike Hutton]]
 
 
|-
 
|-
−
| [[File:HitachiFinishNailer.jpg|180px]] || [http://www.hitachipowertools.com/PDF/All/NT50AE2_OM.PDF 2" 18Gauge Finish Nailer] || Hitachi || NT50AE2 || Air || Operational || [[User:Mike Hutton|Mike Hutton]]
+
|[[File:freud_SD508.jpg|200px]]||8 In. Super Stacked Dado Set 8 x 24 Tooth 1/4" to 29/32“||Freud||SD508||NA||Operational
 
|-
 
|-
−
| [[File:pc_bn125a.jpg|200px]] || [[media:PC_BN125A_manual.pdf|18 Gauge 5/8-1-1/4" Brad Nailer]] || Porter Cable|| BN125A|| Air || Operational || [[User:Mike Hutton|Mike Hutton]]
+
|[[File:Jet_jdp-17dx.jpg|200px]]||[[Media:17inchDrillPressManual.pdf|17" Drill Press with laser]]||Jet||JDP-17DX||110||Operational
 
|-
 
|-
−
| [[File:Router_table.jpg|200px]] || Router Table || Rockler || || NA || Operational || [[User:Mike Hutton|Mike Hutton]]
+
|[[File:Jet_jbos-5.jpg|200px]]||[http://content.jettools.com/assets/manuals/708404_man_EN.pdf Oscillating Spindle Sander]||Jet||JBOS-5||110||Operational
 
|-
 
|-
−
| [[File:PorterCable7518.jpg|200px]] || [[media:PorterCable7518OwnerManual.pdf|Router Table with JessEm Lift]] || Porter Cable || 7518 || 110 || Operational || [[User:Mike Hutton|Mike Hutton]]
+
|[[File:jet_jwbg-8.jpg|200px]]||[http://content.jettools.com/assets/manuals/726100_man_EN.pdf Low Speed 8" Bench Grinder]||Jet||JWBG-8||110||Operational
 
|-
 
|-
−
| [[File:DW715.jpg|200px]] || [[media:DW715_manual.pdf|12" Single Bevel Miter Saw]] || Dewalt || DW715 || 110 || Operational || [[User:Mike Hutton|Mike Hutton]]
+
|[[File:worksharp_ws3000.jpg|200px]]||[http://www.worksharptools.com/media/mconnect_uploadfiles/p/p/pp0002326_rev_2_ws3000_tri-ling_users_guide.pdf Tool Sharpener]||Work Sharp||WS3000||110||Operational
 
|-
 
|-
−
| [[File:DewaltDW705.jpg|200px]] || [[media:DewaltDW705OwnerManual.pdf|12" Double Bevel Miter Saw]] || Dewalt || DW705 || 110 || Out of Order- Bent Shaft- damaged!|| [[User:Mike Hutton|Mike Hutton]]
+
|[[File:buffer.jpg|200px]]||[[Media:8 inch buffer manual.pdf|8" Buffer for Honing]]||Central Machinery||40668||110||Operational
 
|-
 
|-
−
| [[File:PowerMatic30b.jpg|200px]] || [[media:PM30_manual.pdf|6x48" Belt/12" Disc sander]] || Powermatic || 30b || 110 || Operational || [[User:Mike Hutton|Mike Hutton]]
+
|[[File:granite.jpg|200px]]||Granite Surface Plate for Sharpening||9" x 12" x 2" A Grade||Granite Surface Plate||NA||Operational
 
|-
 
|-
−
| [[File:Delta_31-460.jpg|200px]] || [[media:Delta_31-460__manual.pdf|4x36" Belt/5" Disc sander]] || Delta || 31-460 || 110 || Operational || [[User:Mike Hutton|Mike Hutton]]
+
|[[File:AFS-1000B.jpg|200px]]||[[Media:AFS-1000B manual.pdf|3-speed Remote Control Shop Ambient Dust Filter]]||Jet||AFS-1000B||110||Operational
 
|-
 
|-
−
| [[File: DWV012.jpg|200px]] || [[media: DWV012 _manual.pdf|10 gallon HEPA Tool Actuated Self-cleaning Dust Extractor]] || DeWalt || DWV012 || 110 || Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File:PC_382_sander.jpg|200px]] || [[media:PC_382_manual.pdf|5 inch 8-hole hook and loop Random Orbit Sander]] || Porter Cable|| 382 || 110 || Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File: DWE6421K.jpg|200px]] || [[media: DWE6421K _manual.pdf|5” 8-hole hook and loop random orbit sander]] || DeWalt || DWE6421K || 110 || Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File:bosch_1295dvs.jpg|200px]] |||5" 8-Hole variable speed random orbit sander || Bosch||  1295DVS|| 110 || Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File:Dremel 1731 sander.jpg|200px]] || 1x30 Belt/5 Disc sander || Dremel|| 1731 || 110 || Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File:delta_14_bandsaw.jpg|200px]] || [[media:Delta 14 bandsaw.pdf|14" Bandsaw 93-1/2 inch blade]] || Rockwell || 14" Enclosed Base || 110 || Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File:g0513x2.jpg|200px]] || [[media:g0513x2 manual.pdf|17" Bandsaw Extreme Series 131-1/2 inch blade]] || Grizzly || G0513X2|| 220 || Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File:Jet1221VS.jpg|200px]] || [[media:Jet1221VS_manual.pdf|12x43 Electronic Variable Speed Wood Lathe]] || Jet||  1221VS with extension|| 110 || Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File:Oneway_talon.jpg|200px]] || 1X8TPI  Wood Lathe Chuck ||Oneway|| Talon|| manual || Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File:Nova Mercury Lathe.jpg|200px]] || [[media:Nova Mercury Lathe manual.pdf| Variable Speed 8"x11" Mini Wood Lathe]] || Teknatool ||Nova Mercury  || 110 || Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File:shopbot_alpha_4x8.jpg|200px]] || 4'x 8' 3 Axis [[Shopbot]] CNC Router|| ShopBot || PRT 96|| 110 || Operational|| [[User:Curt Gridley|Curt Gridley]] or [[User:James Lancaster|James Lancaster]]
 
−
|-
 
−
| [[File:Ingersoll_Compressor.jpg|200px]] || [[media:IR SS5L5 manual.pdf|5HP 60 gal Compressor]] || Ingersoll Rand || SS5L5 || 220 || Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File:parallel_clamp.jpg|200px]] || 24" (qty 2) & 40" (qty 2)  & 48" (qty 2) Clamps || Jorgensen || Cabinet Master Clamps || manual || Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File:Jet_clamp.jpg|200px]] || 24" (qty 2) Clamps || Jet || Parallel Clamps || manual || Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File:bessey_tradesman_clamps.jpg|200px]] || 30 piece assortment Clamps|| Bessey || Tradesman Clamps|| manual || Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File:bessey deep.jpg|200px]] || Deep reach (qty 2)  Clamps|| Bessey || Tradesman Clamps|| manual || Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File:Masterforce_clamp.jpg|200px]] || Deep reach 12" (qty 2) & 24" (qty 7) 36" (qty 2)  Clamps|| Masterforce || Clamps|| manual || Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File:Irwin_quick_clamp.jpg|200px]] || Quick Grip 12" (qty 4)  Clamps|| Irwin || Clamps|| manual || Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File:bessey strap clamp.jpg|200px]] || High Tension Strap Clamp|| Bessey || VSC|| manual || Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File:Kreg-JIg-K5.jpg|200px]] || [[media:K5Manual.pdf|Kreg Jig Pocket Hole Kit]] || Kreg || K5 || manual || Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File:DMT_Stone.jpg|200px]] || Diamond sharpening stones|| DMT || 6" x2" fine and extra-fine || manual || Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File:mini-hone.jpg|200px]] || Detail diamond honing kit|| DMT || course, fine and extra-fine D2K|| manual || missing from the shop || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File:D3246.jpg|200px]] || [[media:D3246_manual.pdf|Tablesaw Tenon Jig (Multi-axis)]]||Shop Fox || D3246|| manual || Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File: DCK280C2.jpg|200px]] || [[media: DCK280C2 _manual.pdf|20V cordless ½” drill/driver and Impactor set]] || DeWalt || DCK280C2 || 1.5Ah battery || Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File: DCK283D2.jpg|200px]] || [[media: DCK283D2 _manual.pdf|20V Brushless ½” drill/driver and Impactor set]] || DeWalt || DCK283D2 || 1.5Ah battery || Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File:Ridgid_wd09450.jpg|200px]] || 9 Gallon Shop Vacuum || Ridgid|| WD09450|| 110 || Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
| [[File:eagle_1932.jpg|200px]] || 30 Gallon Flammable Liquid Storage Cabinet]] || Eagle||  1932|| Manual|| Operational || [[User:Mike Hutton|Mike Hutton]]
 
−
|-
 
−
|}
 
−
</onlyinclude>
 
  
−
==Woodshop Authorized Members==
+
|[[File:DwaltDW788.jpg|200px]]||[[Media:383329-00,DW788.pdf|20" Scroll Saw]]||Dewalt||DW788||110||Operational
−
{| class="wikitable sortable"
 
−
|-
 
−
! Name !! Safety Class Date !! Notes
 
−
|-
 
−
| [[User:Mike Hutton|Mike Hutton]] ||09/23/15 || Woodshop Area Lead
 
−
|-
 
−
| [[User:Larry Roth|Larry Roth]] || 09/23/15|| Woodshop instructor
 
−
|-
 
−
| [[User:Bryan Barr|Bryan Barr]] ||09/23/15 ||
 
−
|-
 
−
| [[User:Jess Bechtelheimer|Jess Bechtelheimer]] || 09/28/15|| Arts BD
 
−
|-
 
−
| [[User:Tom McGuire|Tom McGuire]] ||09/28/15 || Makerspace Director
 
−
|-
 
−
| [[User:David Springs|David Springs]] ||09/23/15 ||
 
−
|-
 
−
| [[User:Recil Robinson|Recil Robinson]] || 09/23/15||
 
−
|-
 
−
| [[User:Barry Wright|Barry Wright]] || 09/23/15||
 
−
|-
 
−
| [[User:Jessica Jones|Jessica Jones]] || 09/26/15||
 
−
|-
 
−
| [[User:Robert Irons|Robert Irons]] ||09/26/15 ||
 
−
|-
 
−
| [[User:David Hammond|David Hammond]] ||09/26/15 ||
 
−
|-
 
−
| [[User:Clay Hammond|Clay Hammond]] ||09/26/15 ||
 
−
|-
 
−
| [[User:Brad Cooley|Brad Cooley]] || 09/26/15||
 
−
|-
 
−
| [[User:James Classen|James Classen]] || 09/28/15||
 
−
|-
 
−
| [[User:John Alexander|John Alexander]] ||09/28/15 || MakeICT VP
 
−
|-
 
−
| [[User:Charles Timmons|Charles Timmons]] || 10/14/15||
 
−
|-
 
−
| [[User:Kim|Kim Lujan]] || 09/28/15|| Laser Cutter
 
−
|-
 
−
| [[User:Paul Wilson|Paul Wilson]] || 10/14/15||
 
−
|-
 
−
| [[User:Derek Alexander|Derek Alexander]] || 10/14/15||
 
−
|-
 
−
| [[User:Michael Barrett|Michael Barrett]] ||10/14/15 ||
 
−
|-
 
−
| [[User:Jerry Carpenter|Jerry Carpenter]] ||09/23/15 || Wood Shop Deputy Area Lead
 
−
|-
 
−
| [[User:Clark Schultz|Clark Schultz]] || 09/23/15||  Safety Sultan
 
−
|-
 
−
| [[User:Jens Torell|Jens Torell]] || 09/23/15|| Former VP MakeICT
 
−
|-
 
−
| [[User:Chris Batcheller|Chris Batcheller]] ||09/23/15 ||
 
−
|-
 
−
| [[User:Mike Doolittle|Mike Doolittle]] || 09/26/15||
 
−
|-
 
−
| [[User:Dustin Richey|Dustin Richey]] || 09/28/15|| Former Treasurer
 
−
|-
 
−
| [[User:Santhosh Subramanian|Santhosh Subramanian]] ||09/26/15 ||
 
−
|-
 
−
| [[User:Thomas Bloom|Thomas Bloom]] || 09/26/15||
 
−
|-
 
−
| [[User:Logan Pajunen|Logan Pajunen]] || 09/26/15|| MakeICT president
 
−
|-
 
−
| [[User:Chuck Surland|Chuck Surland]] || 09/26/15||
 
−
|-
 
−
| [[User:Jane Teter|Jane Teter]] || 09/26/15||
 
−
|-
 
−
| [[User:Karen Callanan|Karen Callanan]] || 09/26/15||
 
−
|-
 
−
| [[User:Dana Danaver|Dana Danaver]] || 09/28/15||
 
−
|-
 
−
| [[User:Curt Gridley|Curt Gridley]] ||09/28/15 || CNC Area Lead
 
−
|-
 
−
| [[User:Geoffrey Kisch|Geoffrey Kisch]] || 09/28/15||
 
−
|-
 
−
| [[User:Kathryn Vernon|Kathryn Vernon]] || 09/26/15||
 
−
|-
 
−
| [[User:Christian Kindel|Christian Kindel]] || 09/23/15||  Fab Lab Area Lead
 
−
|-
 
−
| [[User:Samuel McConnell|Samuel McConnell]] ||10/14/15 ||
 
−
|-
 
−
| [[User:Andy Solter|Andy Solter]] || 10/14/15||
 
−
|-
 
−
| [[User:Taylor Johnson|Taylor Johnson]] ||10/14/15 ||
 
−
|-
 
−
| [[User:Mike Conkling|Mike Conkling]] ||10/25/15 ||
 
−
|-
 
−
| [[User:Brian Scheideman|Brian Scheideman]] ||10/25/15 ||
 
−
|-
 
−
| [[User:Jon Treas|Jon Treas]] ||10/25/15 ||
 
−
|-
 
−
| [[User:Chuck Griesel|Chuck Griesel]] || 10/25/15||
 
−
|-
 
−
| [[User:Jesse Lee|Jesse Lee]] || 10/25/15||
 
−
|-
 
−
| [[User:Samuel Schurter|Samuel Schurter]] ||11/17/15 || Classroom Area Lead
 
−
|-
 
−
| [[User:Jane Voelkel|Jane Voelkel]] || 11/17/15||
 
−
|-
 
−
| [[User:Barb Davis|Barb Davis]] || 11/17/15|| MakeICT Board member
 
−
|-
 
−
| [[User:Jeremiah Loder|Jeremiah Loder]] ||11/17/15 ||
 
−
|-
 
−
| [[User:Marc Lujan|Marc Lujan]] || 11/17/15||
 
−
|-
 
−
| [[User:Miles McClure|Miles McClure]] || 11/17/15||
 
−
|-
 
−
| [[User:Teresa McClure|Teresa McClure]] ||11/17/15 ||
 
−
|-
 
−
| [[User:Weston Vice|Weston Vice]] || 11/17/15||
 
−
|-
 
−
| [[User:Chris DeVries|Chris DeVries]] || 11/17/15||
 
−
|-
 
−
| [[User:Iylland Smith|Iylland Smith]] || 11/17/15||
 
−
|-
 
−
| [[User:Daniel Towle|Daniel Towle]] || 11/17/15||
 
−
|-
 
−
| [[User:Keith Rowley|Keith Rowley]] || 12/16/15||
 
−
|-
 
−
| [[User:Dominic Canare|Dominic Canare]] || 12/16/15|| Past President
 
−
|-
 
−
| [[User:Stuart Smith|Stuart Smith]] || 12/16/15||
 
−
|-
 
−
| [[User:Michael Mendoza|Michael Mendoza]] || 12/16/15||
 
−
|-
 
−
| [[User:David Mendoza|David Mendoza]] || 12/16/15||
 
−
|-
 
−
| [[User:Rick Boyd Jr.|Rick Boyd Jr.]] || 12/16/15||
 
−
|-
 
−
| [[User:John Harrison|John Harrison]] || 12/16/15||
 
−
|-
 
−
| [[User:J.D. Schulte|J.D. Schulte]] || 12/16/15||
 
−
|-
 
−
| [[User:Mitzi Trout|Mitzi Trout]] || 12/16/15||
 
−
|-
 
−
| [[User:Melissa Soutiere|Melissa Soutiere]] || 12/16/15||
 
−
|-
 
−
| [[User:Catherine Barba-Abay|Catherine Barba-Abay]] || 1/5/16||
 
−
|-
 
−
| [[User:Galen Cassidy| Galen Cassidy]] || 1/5/16||
 
−
|-
 
−
| [[User:Susan de Wit| Susan de Wit]] || 1/5/16|| Gallery Area Lead
 
−
|-
 
−
| [[User:Alex Gretsky| Alex Gretsky]] || 1/5/16||
 
−
|-
 
−
| [[User:Jim Hammer| Jim Hammer]] || 1/5/16||
 
−
|-
 
−
| [[User:Brock Milford| Brock Milford]] || 1/5/16||
 
−
|-
 
−
| [[User:Marcus Mosley| Marcus Mosley]] || 1/5/16||
 
−
|-
 
−
| [[User:James A Seymour| James Seymour]] || 1/5/16|| Electronics Area Lead
 
−
|-
 
−
| [[User:Jeff Eck| Jeff Eck]] || 1/5/16|| Welding Dude
 
 
|-
 
|-
−
| [[User:Terry Weatherson| Terry Weatherson]] || 1/5/16||  
+
|[[File:delta_40-560.jpg|200px]]||[[Media:Delta40-560 manual.pdf|16" Two speed Scroll Saw]]||Delta||40-560, TY II||110||Operational
 
|-
 
|-
−
| [[User:Burt Unruh| Burt Unruh]] || 1/5/16|| Woodshop Instructor
+
|[[File: DW331K.jpg|200px]]||[[Media:DW331K manual.pdf|T-slot Jigsaw]]||DeWalt||DW331K||110||Operational
 
|-
 
|-
−
| [[User:Rick McMullen| Rick McMullen]] || 1/5/16||  
+
|[[File:Skil_4480.jpg|200px]]||[[Media:Skil 4480 manual.pdf|Jigsaw]]||Skil||4480||110||Operational
 
|-
 
|-
−
| [[User:Jeff Carlson| Jeff Carlson]] || 2/4/16||  
+
|[[File:PC-557.jpg|200px]]||[[Media:PC557 manual.pdf|"Biscuit Cutter" Plate Jointer]]||Porter Cable||557||110||Operational
 
|-
 
|-
−
| [[User:Shawn Achenbach| Shawn Achenbach]] || 2/4/16||  
+
|[[File:BoschRouter.png|200px]]||[[Media:BoschRouterManual.pdf|2.25HP Router]]||Bosch||1617EVSPK||110||Operational
 
|-
 
|-
−
| [[User:Aaron Rivers| Aaron Rivers]] || 2/4/16||  
+
|[[File: DWP611PK.jpg|200px]]||[[Media:DWP611PK manual.pdf|1.25HP Fixed Base/Plunge Base Router]]||DeWalt||DWP611PK||110||Operational
 
|-
 
|-
−
| [[User:Bonnie Thurman| Bonnie Thurman]] || 2/4/16||  
+
|[[File:Bosch_colt_router.png|200px]]||[[Media:Bosch colt manual.pdf|1HP Router]]||Bosch||Colt||110||Operational
 
|-
 
|-
−
| [[User:Michael James| Michael James]] || 2/4/16||  
+
|[[File:4212.jpg|200px]]||[[Media:4212 manual.pdf|12" Dovetail Jig]] / [[Media:4212 SupplementalManual.pdf|Advanced Supplemental Manual]]||Porter Cable||4212||Manual||Operational
 
|-
 
|-
−
| [[User:Matthew Warren| Matthew Warren]] || 2/4/16||  
+
|[[File:dremel_MM30.jpg|200px]]||[[Media:MM30 manual.pdf|Multi-Max Oscillating Tool]]||Dremel||MM30||110||Operational
 
|-
 
|-
−
| [[User:Jason Bailey| Jason Bailey]] || 2/4/16||  
+
|[[File:HitachiFinishNailer.jpg|180px]]||[http://www.hitachipowertools.com/PDF/All/NT50AE2_OM.PDF 2" 18Gauge Finish Nailer]||Hitachi||NT50AE2||Air||Operational
 
|-
 
|-
−
| [[User:Marty Boyzuck| Marty Boyzuck]] || 2/4/16||  
+
|[[File:pc_bn125a.jpg|200px]]||[[Media:PC BN125A manual.pdf|18 Gauge 5/8-1-1/4" Brad Nailer]]||Porter Cable||BN125A||Air||Operational
 
|-
 
|-
−
| [[User:Melanie Jenney| Melanie Jenney]] || 2/4/16||  
+
|[[File:Sears_AC.jpg|200px]]||2HP Air Compressor||Sears||20 Gallon||220V||Operational
 
|-
 
|-
−
| [[User:Steve Saner| Steve Saner]] || 2/4/16||  
+
|[[File:Router_table.jpg|200px]]||Router Table||Rockler|| ||NA||Operational
 
|-
 
|-
−
| [[User:Doug Wilson| Doug Wilson]] || 2/4/16||  
+
|[[File:PorterCable7518.jpg|200px]]||[[Media:PorterCable7518OwnerManual.pdf|Router Table with JessEm Lift]]||Porter Cable||7518||110||Operational
 
|-
 
|-
−
| [[User:Jessica Wilson| Jessica Wilson]] || 2/4/16||  
+
|[[File:BOSCH_GCM12SD.jpg|200px]]||[[Media:2610051827 GCM12SD 0918.pdf|12" Dual Bevel Gliding Miter Saw]]||Bosch||GCM12SD||110||Operational
 
|-
 
|-
−
| [[User:Steven Wilson| Steven Wilson]] || 2/4/16||  
+
|[[File:PowerMatic30b.jpg|200px]]||[[Media:PM30 manual.pdf|6x48" Belt/12" Disc sander]]||Powermatic||30b||110||Operational
 
|-
 
|-
−
| [[User:Steve Thornton| Steve Thornton]] || 2/4/16||  
+
|[[File:Delta_31-460.jpg|200px]]||[[Media:Delta 31-460 manual.pdf|4x36" Belt/5" Disc sander]]||Delta||31-460||110||Operational
 
|-
 
|-
−
| [[User:Jon Gamache| Jon Gamache]] || 2/4/16||  
+
|[[File: DWV012.jpg|200px]]||[[Media:DWV012 manual.pdf|10 gallon HEPA Tool Actuated Self-cleaning Dust Extractor]]||DeWalt||DWV012||110||Operational
 
|-
 
|-
−
| [[User:Larry Frank|Larry Frank]] ||2/20/16 ||  
+
|[[File:PC_382_sander.jpg|200px]]||[[Media:PC 382 manual.pdf|5 inch 8-hole hook and loop Random Orbit Sander]]||Porter Cable||382||110||Operational
 
|-
 
|-
−
| [[User:Todd Grant|Todd Grant]] ||2/20/16 ||  
+
|[[File: DWE6421K.jpg|200px]]||[[Media:DWE6421K manual.pdf|5” 8-hole hook and loop random orbit sander]]||DeWalt||DWE6421K||110||Operational
 
|-
 
|-
−
| [[User:Byrum (Nathan) Huff|Byrum (Nathan) Huff]] ||2/20/16 ||  
+
|[[File:bosch_1295dvs.jpg|200px]]|||5" 8-Hole variable speed random orbit sander||Bosch||1295DVS||110||Operational
 
|-
 
|-
−
| [[User:Sam Jossie|Sam Jossie]] ||2/20/16 ||  
+
|[[File:315279870.jpg|200px]]|||5" 8-Hole Hook & Loop Random Orbit Sander||Craftsman||315.279870||110||Operational
 
|-
 
|-
−
| [[User:Bryant Ketchersid|Bryant Ketchersid]] ||2/20/16 ||  
+
|[[File:PC330.jpg|200px]]|||1/4 Sheet Finish Sander||Porter Cable||330 Speed Bloc||110||Operational
 
|-
 
|-
−
| [[User:William Parsons|William Parsons]] ||2/20/16 ||  
+
|[[File:Dremel 1731 sander.jpg|200px]]||1x30 Belt/5 Disc sander||Dremel||1731||110||Operational
 
|-
 
|-
−
| [[User:Ernest Sharp|Ernest Sharp]] ||2/20/16 ||  
+
|
 +
|
 +
|
 +
|
 +
|
 +
|
 
|-
 
|-
−
| [[User:Connor Turley|Connor Turley]] ||2/20/16 ||  
+
|[[File:Jet1221VS.jpg|200px]]||[[Media:Jet1221VS manual.pdf|12x43 Electronic Variable Speed Wood Lathe]]||Jet||1221VS with extension||110||Operational
 
|-
 
|-
−
| [[User:Sean Beorn|Sean Beorn]] ||2/20/16 ||  
+
|[[File:Oneway_talon.jpg|200px]]||1X8TPI  Wood Lathe Chuck||Oneway||Talon||manual||Operational
 
|-
 
|-
−
| [[User:Mark Esau|Mark Esau]] ||3/31/16 ||  
+
|[[File:Nova Mercury Lathe.jpg|200px]]||[[Media:Nova Mercury Lathe manual.pdf| Variable Speed 8"x11" Mini Wood Lathe]]||Teknatool||Nova Mercury||110||Operational
 
|-
 
|-
−
| [[User:John Cody|John Cody]] ||3/31/16 || Ceramics Area Lead
+
|[[File:shopbot_alpha_4x8.jpg|200px]]||4'x 8' 3 Axis [[Shopbot]] CNC Router||ShopBot||PRT 96||110||Operational
 
|-
 
|-
−
| [[User:Mike Barushok|Mike Barushok]] ||3/31/16 || Consignment Area Lead
+
|[[File:parallel_clamp.jpg|200px]]||24" (qty 2) & 40" (qty 2)  & 48" (qty 2) Clamps||Jorgensen||Cabinet Master Clamps||manual||Operational
 
|-
 
|-
−
| [[User:Rose Hansen|Rose Hansen]] ||3/31/16 ||  
+
|[[File:Jet_clamp.jpg|200px]]||24" (qty 4) & 31" (qty 2) Clamps||Jet||Parallel Clamps||manual||Operational
 
|-
 
|-
−
| [[User:Mike McKown|Mike McKown]] ||3/31/16 ||  
+
|[[File:bessey_tradesman_clamps.jpg|200px]]||30 piece assortment Clamps||Bessey||Tradesman Clamps||manual||Operational
 
|-
 
|-
−
| [[User:Abram Howell|Abram Howell]] ||3/31/16 || Guest
+
|[[File:bessey deep.jpg|200px]]||Deep reach (qty 2)  Clamps||Bessey||Tradesman Clamps||manual||Operational
 
|-
 
|-
−
| [[User:Eric Lamp|Eric Lamp]] ||3/31/16 ||  
+
|[[File:Masterforce_clamp.jpg|200px]]||Deep reach 12" (qty 2) & 24" (qty 7) 36" (qty 2)  Clamps||Masterforce||Clamps||manual||Operational
 
|-
 
|-
−
| [[User:Pam Cortez|Pam Cortez]] ||3/31/16 || Guest
+
|[[File:Irwin_quick_clamp.jpg|200px]]||Quick Grip 6" (qty 8)  Clamps||Irwin||Clamps||manual||Operational
 
|-
 
|-
−
| [[User:Chris Strait|Chris Strait]] ||3/31/16 ||  
+
|[[File:bessey strap clamp.jpg|200px]]||High Tension Strap Clamp||Bessey||VSC||manual||Operational
 
|-
 
|-
−
| [[User:Bob Jackson|Bob Jackson]] ||3/31/16 ||  
+
|[[File:Kreg-JIg-K5.jpg|200px]]||[[Media:K5Manual.pdf|Kreg Jig Pocket Hole Kit]]||Kreg||K5||manual||Operational
 
|-
 
|-
−
| [[User:Steve Owens|Steve Owens]] ||3/31/16 ||  
+
|[[File:DMT_Stone.jpg|200px]]||Diamond sharpening stones||DMT||6" x2" fine and extra-fine||manual||Operational
 
|-
 
|-
−
| [[User:Tobias DiGennaro|Tobias DiGennaro]] ||3/31/16 ||  
+
|[[File:mini-hone.jpg|200px]]||Detail diamond honing kit||DMT||course, fine and extra-fine D2K||manual||missing from the shop
 
|-
 
|-
−
| [[User:Audrey Barba|Audrey Barba]] ||3/31/16 ||  
+
|[[File:D3246.jpg|200px]]||[[Media:D3246 manual.pdf|Tablesaw Tenon Jig (Multi-axis)]]||Shop Fox||D3246||manual||Operational
 
|-
 
|-
−
| [[User:Joseph Woolridge|Joseph Woolridge]] ||3/31/16 ||
+
|[[File: DCK280C2.jpg|200px]]||[[Media:DCK280C2 manual.pdf|20V cordless ½” drill/driver and Impactor set]]||DeWalt||DCK280C2||1.5Ah battery||Operational
 
|-
 
|-
−
| [[User:Ella Rogers-Hungria|Ella Rogers-Hungria]] ||4/27/16 ||
+
|[[File: DCK283D2.jpg|200px]]||[[Media:DCK283D2 manual.pdf|20V Brushless ½” drill/driver and Impactor set]]||DeWalt||DCK283D2||1.5Ah battery||Operational
 
|-
 
|-
−
| [[User:Susie Cunningham|Susie Cunningham]] ||4/27/16 ||
+
|[[File:Ridgid_wd09450.jpg|200px]]||9 Gallon Shop Vacuum||Ridgid||WD09450||110||Operational
 
|-
 
|-
−
| [[User:Richard Predmore|Richard Predmore]] ||4/27/16 ||Guest
+
|[[File:eagle_1932.jpg|200px]]||30 Gallon Flammable Liquid Storage Cabinet]]||Eagle||1932||Manual||Operational
−
|-
 
−
| [[User:Nolan Richmeier|Nolan Richmeier]] ||4/27/16 ||
 
−
|-
 
−
| [[User:Jason Becker|Jason Becker]] ||4/27/16 ||
 
−
|-
 
−
| [[User:Joe Groom|Joe Groom]] ||4/27/16 ||
 
−
|-
 
−
| [[User:James Lancaster|James Lancaster]] ||4/27/16 ||ShopBot and 3D printer wiz
 
−
|-
 
−
| [[User:Matt Cannon|Matt Cannon]] ||4/27/16 ||Guest
 
−
|-
 
−
| [[User:Christy Bennett|Christy Bennett]] ||4/27/16 ||
 
−
|-
 
−
| [[User:Paul Poirier|Paul Poirier]] ||4/27/16 ||
 
−
|-
 
−
| [[User:David Graver|David Graver]] ||4/27/16 ||
 
−
|-
 
−
| [[User:John Clark|John Clark]] ||4/27/16 ||
 
−
|-
 
−
| [[User:Austin White|Austin White]] ||4/27/16 ||
 
−
|-
 
−
| [[User:Joseph Lobdell|Joseph Lobdell]] ||4/27/16 ||
 
−
|-
 
−
| [[User:H. Robert Shultz|H. Robert Shultz]] ||4/27/16 ||
 
−
|-
 
−
| [[User:Eric Sommer|Eric Sommer]] ||4/27/16 ||
 
−
|-
 
−
| [[User:Rustin Atkeisson|Rustin Atkeisson]] ||4/27/16 ||
 
−
|-
 
−
| [[User:Mark Reuter|Mark Reuter]] ||5/21/16 ||
 
−
|-
 
−
| [[User:Paul Sheets|Paul Sheets]] ||5/21/16 ||
 
−
|-
 
−
| [[User:Mark Satoria|Mark Satoria]] ||5/21/16 ||
 
−
|-
 
−
| [[User:Travis Kvassay|Travis Kvassay]] ||5/21/16 ||
 
−
|-
 
−
| [[User:Larame Cline|Larame Cline]] ||5/21/16 ||
 
−
|-
 
−
| [[User:Kyle McCormick|Kyle McCormick]] ||5/21/16 ||
 
−
|-
 
−
| [[User:Henry Gridley|Henry Gridley]] ||5/21/16 ||
 
−
|-
 
−
| [[User:Resha Parajuli|Resha Parajuli]] ||5/21/16 ||
 
−
|-
 
−
| [[User:Nicole Visty|Nicole Visty]] ||5/21/16 ||
 
−
|-
 
−
| [[User:Mike Arnold|Mike Arnold]] ||5/21/16 ||
 
−
|-
 
−
| [[User:Matthew Pewewardy|Matthew Pewewardy]] ||5/21/16 ||
 
−
|-
 
−
| [[User:Jake Ferrell|Jake Ferrell]] ||5/21/16 ||
 
−
|-
 
−
| [[User:Kurt Hershey|Kurt Hershey]] ||5/21/16 ||
 
−
|-
 
−
| [[User:Jon Christensson|Jon Christensson]] ||5/21/16 ||
 
−
|-
 
−
| [[User:Matthew Pogue|Matthew Pogue]] ||5/21/16 ||Security Key Master
 
−
|-
 
−
| [[User:James Dorsch|James Dorsch]] ||5/21/16 ||
 
−
|-
 
−
| [[User:Dale Kester|Dale Kester]] ||6/17/16 ||
 
−
|-
 
−
| [[User:Andrew Kester|Andrew Kester]] ||6/17/16 ||
 
−
|-
 
−
| [[User:Dean Day|Dean Day]] ||6/17/16 ||
 
−
|-
 
−
| [[User:Valerie Lillich|Valerie Lillich]] ||6/17/16 ||
 
−
|-
 
−
| [[User:Turquoise Thomas|Turquoise Thomas]] ||6/17/16 ||
 
−
|-
 
−
| [[User:Bruce Hadley|Bruce Hadley]] ||6/17/16 ||
 
−
|-
 
−
| [[User:Terry Hodges|Terry Hodges]] ||6/17/16 ||
 
−
|-
 
−
| [[User:Marc Roths|Marc Roths]] ||6/17/16 ||
 
−
|-
 
−
| [[User:Michael Piccone|Michael Piccone]] ||6/17/16 ||
 
−
|-
 
−
| [[User:Brad Ruder|Brad Ruder]] ||6/17/16 ||Print Making Area Lead
 
−
|-
 
−
| [[User:Anna Lenhart Murray|Anna Lenhart Murray]] ||6/17/16 ||
 
−
|-
 
−
| [[User:Jerry Shubert|Jerry Shubert]] ||6/17/16 ||
 
−
|-
 
−
| [[User:Dale Morrow|Dale Morrow]] ||6/17/16 ||
 
−
|-
 
−
| [[User:Mike Brennison|Mike Brennison]] ||6/17/16 ||
 
−
|-
 
−
| [[User:Jared Stafford|Jared Stafford]] ||6/17/16 ||
 
−
|-
 
−
| [[User:Ed Hutson|Ed Hutson]] ||6/17/16 ||
 
−
|-
 
−
| [[User:Bob Kralicek|Bob Kralicek]] ||7/23/16 ||
 
−
|-
 
−
| [[User:Maria Geeslin|Maria Geeslin]] ||7/23/16 ||
 
−
|-
 
−
| [[User:David Moreno|David Moreno]] ||7/23/16 ||
 
−
|-
 
−
| [[User:Sherri Moreno|Sherri Moreno]] ||7/23/16 ||
 
−
|-
 
−
| [[User:Andy Carter|Andy Carter]] ||7/23/16 ||
 
−
|-
 
−
| [[User:Jeremiah Burian|Jeremiah Burian]] ||7/23/16 ||Metal Shop Area Lead
 
−
|-
 
−
| [[User:Tad Williams|Tad Williams]] ||7/23/16 ||
 
−
|-
 
−
| [[User:Bruce Barley|Bruce Barley]] ||7/23/16 ||
 
−
|-
 
−
| [[User:Monroe williams|Monroe williams]] ||7/23/16 ||
 
−
|-
 
−
| [[User:Tristan Jones|Tristan Jones]] ||7/23/16 ||
 
−
|- id="Trysten"
 
−
| [[User:Austin Stanley|Austin Stanley]] ||7/23/16 ||
 
−
|-
 
−
| [[User:Tim Collins|Tim Collins]] ||7/23/16 ||
 
−
|-
 
−
| [[User:Cindy Conrad|Cindy Conrad]] ||7/23/16 ||
 
−
|-
 
−
| [[User:Gary Keck|Gary Keck]] ||7/23/16 ||
 
−
|-
 
−
| [[User:Dennis Bishop|Dennis Bishop]] ||7/23/16 ||
 
−
|-
 
−
| [[User:William Woods|William Woods]] ||7/23/16 ||
 
−
|-
 
−
| [[User:Douglas Woolley|Douglas Woolley]] ||7/23/16 ||
 
−
|-
 
−
| [[User:Ryan Olsen|Ryan Olsen]] ||8/12/16 ||
 
−
|-
 
−
| [[User:Jeremy Blackburn|Jeremy Blackburn]] ||8/12/16 ||
 
−
|-
 
−
| [[User:Gemma Blackburn|Gemma Blackburn]] ||8/12/16 ||
 
−
|-
 
−
| [[User:James Tennant|James Tennant]] ||8/12/16 ||
 
−
|-
 
−
| [[User:Ryan Wolf|Ryan Wolf]] ||8/12/16 ||
 
−
|-
 
−
| [[User:Brian Groom|Brian Groom]] ||8/12/16 ||
 
−
|-
 
−
| [[User:David Christiansen|David Christiansen]] ||8/12/16 ||
 
−
|-
 
−
| [[User:Drew Holler|Drew Holler]] ||8/12/16 ||
 
−
|-
 
−
| [[User:Justin Lewis|Justin Lewis]] ||8/12/16 ||
 
−
|-
 
−
| [[User:Kez Cook|Kez Cook]] ||8/12/16 ||
 
−
|-
 
−
| [[User:Andrew Nguyen|Andrew Nguyen]] ||8/12/16 ||
 
−
|-
 
−
| [[User:Alexander Tackett|Alexander Tackett]] ||8/12/16 ||
 
−
|-
 
−
| [[User:Michael Grudowski|Michael Grudowski]] ||8/12/16 ||
 
−
|-
 
−
| [[User:Maggie Allen|Maggie Allen]] ||8/12/16 ||
 
−
|-
 
−
| [[User:Paul Herrington|Paul Herrington]] ||8/12/16 ||
 
−
|-
 
−
| [[User:Gavin Rondeau|Gavin Rondeau]] ||8/12/16 ||
 
−
|-
 
−
| [[User:Tommy McKee|Tommy McKee]] ||8/12/16 ||
 
−
|-
 
−
| [[User:Blake Baysinger|Blake Baysinger]] ||8/15/16 ||
 
−
|-
 
−
| [[User:Chris Corley|Chris Corley]] ||9/17/16 ||
 
−
|-
 
−
| [[User:Scott Hall|Scott Hall]] ||9/17/16 ||
 
−
|-
 
−
| [[User:Alex Kotten|Alex Kotten]] ||9/17/16 ||
 
−
|-
 
−
| [[User:Terrence Laurendine|Terrence Laurendine]] ||9/17/16 ||
 
−
|-
 
−
| [[User:Aaron Ottosen|Aaron Ottosen]] ||9/17/16 ||
 
−
|-
 
−
| [[User:Nikita Ottosen|Nikita Ottosen]] ||9/17/16 ||
 
−
|-
 
−
| [[User:Ellen Rife|Ellen Rife]] ||9/17/16 ||
 
−
|-
 
−
| [[User:Conner Wilson|Conner Wilson]] ||9/17/16 ||
 
−
|-
 
−
| [[User:Laura Wilson|Laura Wilson]] ||9/17/16 ||
 
−
|-
 
−
| [[User:Naixin Willis|Naixin Willis]] ||9/17/16 ||
 
−
|-
 
−
| [[User:Eddie Smith|Eddie Smith]] ||9/17/16 ||
 
−
|-
 
−
| [[User:Daniel Van Sickle|Daniel Van Sickle]] ||10/6/16||
 
−
|-
 
−
| [[User:John Henry|John Henry]] ||10/6/16||
 
−
|-
 
−
| [[User:Ken Steadman|Ken Steadman]] ||10/6/16||
 
−
|-
 
−
| [[User:Amber Noah|Amber Noah]] ||10/6/16||
 
−
|-
 
−
| [[User:Scott Stoecker|Scott Stoecker]] ||10/6/16||
 
−
|-
 
−
| [[User:Jerry Stewart|Jerry Stewart]] ||10/6/16||
 
−
|-
 
−
| [[User:Jacqueline Fowler|Jacqueline Fowler]] ||10/6/16||
 
−
|-
 
−
| [[User:Joseph Fowler|Joseph Fowler]] ||10/6/16||
 
−
|-
 
−
| [[User:Maribeth Yarnell|Maribeth Yarnell]] ||10/6/16||
 
−
|-
 
−
| [[User:Alan Jacobs|Alan Jacobs]] ||10/6/16 ||
 
−
|-
 
−
| [[User:Jeremy Villalobos|Jeremy Villalobos]] ||11/3/16 ||
 
−
|-
 
−
| [[User:Carl Peterson|Carl Peterson]] ||11/3/16 ||NC Programer
 
−
|-
 
−
| [[User:Kyle Jones|Kyle Jones]] ||11/3/16 ||
 
−
|-
 
−
| [[User:Jared Mar|Jared Mar]] ||11/3/16 ||
 
−
|-
 
−
| [[User:Shailaja Jale|Shailaja Jale]] ||11/3/16 ||
 
−
|-
 
−
| [[User:JaiPal Chauhan|JaiPal Chauhan]] ||11/3/16 ||
 
−
|-
 
−
| [[User:Jeff Schoenhofer|Jeff Schoenhofer]] ||11/3/16 ||
 
−
|-
 
−
| [[User:Brenda Hauff|Brenda Hauff]] ||11/3/16 ||
 
−
|-
 
−
| [[User:Susan Scholl|Susan Scholl]] ||11/3/16 ||
 
−
|-
 
−
| [[User:Jeff Pritchett|Jeff Pritchett]] ||11/3/16 ||
 
−
|-
 
−
| [[User:Tim Smith|Tim Smith]] ||11/3/16 ||
 
−
|-
 
−
| [[User:Alex Kern|Alex Kern]] ||11/3/16 ||
 
−
|-
 
−
| [[User:Terry Powell|Terry Powell]] ||11/3/16 ||
 
−
|-
 
−
| [[User:Brooke Hattabaugh|Brooke Hattabaugh]] ||11/3/16 ||
 
−
|-
 
−
| [[User:Cale Mages|Cale Mages]] ||11/3/16 ||
 
−
|-
 
−
| [[User:Tim Otter|Tim Otter]] ||11/3/16 ||
 
−
|-
 
−
| [[User:Fred Britain|Fred Britain]] ||12/1/16 ||
 
−
|-
 
−
| [[User:Paul Buller|Paul Buller]] ||12/1/16 ||
 
−
|-
 
−
| [[User:Aaron Daney|Aaron Daney]] ||12/1/16 ||
 
−
|-
 
−
| [[User:Christine Forester|Christine Forester]] ||12/1/16 ||
 
−
|-
 
−
| [[User:Jay Maloney|Jay Maloney]] ||12/1/16 ||
 
−
|-
 
−
| [[User:Simon McHugh|Simon McHugh]] ||12/1/16 ||
 
−
|-
 
−
| [[User:Christopher Melugin|Christopher Melugin]] ||12/1/16 ||
 
−
|-
 
−
| [[User:Jason Phung|Jason Phung]] ||12/1/16 ||
 
−
|-
 
−
| [[User:Mitch Sorby|Mitch Sorby]] ||12/1/16 ||
 
−
|-
 
−
| [[User:David Span|David Span]] ||12/1/16 ||
 
−
|-
 
−
| [[User:Fred Sullivan|Fred Sullivan]] ||12/1/16 ||
 
−
|-
 
−
| [[User:Matt Young|Matt Young]] ||12/1/16 ||
 
−
|-
 
−
| [[User:Julianna Chen|Julianna Chen]] ||12/28/16||
 
−
|-
 
−
| [[User:Roy Hosie|Roy Hosie]] ||12/28/16||Wood Carver
 
−
|-
 
−
| [[User:Jerome Johnson|Jerome Johnson]] ||12/28/16||
 
−
|-
 
−
| [[User:Ken Koftan|Ken Koftan]] ||12/28/16||
 
−
|-
 
−
| [[User:Nancy Koftan|Nancy Koftan]] ||12/28/16||
 
−
|-
 
−
| [[User:Larry Meeks|Larry Meeks]] ||12/28/16||
 
−
|-
 
−
| [[User:Laura Scholl|Laura Scholl]] ||12/28/16||MakeICT Academy
 
−
|-
 
−
| [[User:Haley Siewert|Haley Siewert]] ||12/28/16||
 
−
|-
 
−
| [[User:Alex Wampler|Alex Wampler]] ||12/28/16||
 
−
|-
 
−
| [[User:Jack Wiens|Jack Wiens]] ||12/28/16||
 
−
|-
 
−
| [[User:Alec Willford|Alec Willford]] ||12/28/16||
 
−
|-
 
−
| [[User:Melody Winger|Melody Winger]] ||12/28/16||
 
−
|-
 
−
| [[User:Adam Price|Adam Price]] ||12/28/16||
 
−
|-
 
−
| [[User:Anthony Hammon|Anthony Hammon]] ||12/28/16||
 
−
|-
 
−
| [[User:Caleb Williams|Caleb Williams]] ||12/28/16||
 
−
|-
 
−
| [[User:Allan Bacon|Allan Bacon]] ||12/28/16||
 
−
|-
 
−
| [[User:Andrew Bertrand|Andrew "Chops" Bertrand]] ||12/28/16||
 
−
|-
 
−
| [[User:Nathan Alms|Nathan Alms]] ||1/16/17 ||
 
−
|-
 
−
| [[User:Terrin Bradfield|Terrin Bradfield]] ||1/16/17 ||
 
−
|-
 
−
| [[User:Clint Bradfield|Clint Bradfield]] ||1/16/17 ||
 
−
|-
 
−
| [[User:Phillip Bush|Phillip Bush]] ||1/16/17 ||
 
−
|-
 
−
| [[User:Charles Chappell|Charles Chappell]] ||1/16/17 ||
 
−
|-
 
−
| [[User:LaDeana Dockery|LaDeana Dockery]] ||1/16/17 ||
 
−
|-
 
−
| [[User:Isaac Mares|Isaac Mares]] ||1/16/17 ||
 
−
|-
 
−
| [[User:Tim McDonough|Tim McDonough]] ||1/16/17 ||
 
−
|-
 
−
| [[User:John McNew|John McNew]] ||1/16/17 ||
 
−
|-
 
−
| [[User:Ariana Powell|Ariana Powell]] ||1/16/17 ||
 
−
|-
 
−
| [[User:Billy Powell|Billy Powell]] ||1/16/17 ||
 
−
|-
 
−
| [[User:Ivan Rossiter|Ivan Rossiter]] ||1/16/17 ||
 
−
|-
 
−
| [[User:Daniel Schrant|Daniel Schrant]] ||1/16/17 ||
 
−
|-
 
−
| [[User:Donald Snyder|Donald Snyder]] ||1/16/17 ||
 
−
|-
 
−
| [[User:Dave Spaulding|Dave Spaulding]] ||1/16/17 ||
 
−
|-
 
−
| [[User:Dick Yarnell|Dick Yarnell]] ||1/16/17 ||
 
−
|-
 
−
| [[User:Gene White|Gene White]] ||1/16/17 ||
 
−
|-
 
−
| [[User:Bruce Witbart|Bruce Witbart]] ||1/16/17 ||
 
−
|-
 
−
| [[User:Richard Abel|Richard Abel]] ||2/2/17||
 
−
|-
 
−
| [[User:Rodney Bahr|Rodney Bahr]] ||2/2/17||
 
−
|-
 
−
| [[User:Patrick Clark|Patrick Clark]] ||2/2/17||
 
−
|-
 
−
| [[User:Shannon Fisher|Shannon Fisher]] ||2/2/17||
 
−
|-
 
−
| [[User:William Gardenhire|William Gardenhire]] ||2/2/17||
 
−
|-
 
−
| [[User:Chris Hilger|Chris Hilger]] ||2/2/17||
 
−
|-
 
−
| [[User:Patrick Hutchison|Patrick Hutchison]] ||2/2/17||
 
−
|-
 
−
| [[User:Samantha Lehr|Samantha Lehr]] ||2/2/17||
 
−
|-
 
−
| [[User:Eric Means|Eric Means]] ||2/2/17||
 
−
|-
 
−
| [[User:Clayton Pearson|Clayton Pearson]] ||2/2/17||
 
−
|-
 
−
| [[User:Alex Pemberton|Alex Pemberton]] ||2/2/17||
 
−
|-
 
−
| [[User:James Pullom|James Pullom]] ||2/2/17||
 
−
|-
 
−
| [[User:Rusty Raymo|Rusty Raymo]] ||2/2/17||
 
−
|-
 
−
| [[User:Catherine Rodriguez-Metz|Catherine Rodriguez-Metz]] ||2/2/17||
 
−
|-
 
−
| [[User:Joni Russell|Joni Russell]] ||2/2/17||
 
−
|-
 
−
| [[User:Mark Russell|Mark Russell]] ||2/2/17||
 
−
|-
 
−
| [[User:Kara Wheeler|Kara Wheeler]] ||2/2/17||
 
−
|-
 
−
| [[User:Joe Landry|Joe Landry]] ||2/9/17||
 
 
|-
 
|-
 
|}
 
|}
 +
</onlyinclude>
 +
 +
==Commercial Sources for Wood==
 +
 +
Purchasing hardwood lumber is very different from purchasing construction lumber. Note that Hardwood Lumber is a botanical term and is not related to the relative hardness of the wood. Hardwoods shed their leaves in the fall. Softwoods are evergreen. That is a general rule, and there are exceptions. Note also that Balsa and Basswood are classified as Hardwoods.
 +
 +
See Wikipedia for [https://en.wikipedia.org/wiki/Lumber#North_American_hardwoods more detail on terms, definitions, and practices involved in purchasing hardwoods in the US].
 +
 +
----
 +
===[https://www.rivercitysawmill.com/ River City Sawmill]===
 +
 +
*[[Tel:(316) 617-3771|(316) 617-3771]]
 +
*Eric Means is a Member of MakeICT.
 +
 +
===[http://www.facebook.com/richardswoodshop Richard's Wood Shop]===
 +
 +
*[[Tel:(316) 200-0512|(316) 200-0512]]
 +
*147 N Oliver Ave, Kechi, KS 67067
 +
 +
===[https://eldersliewoodworks.com/ Elderslie Woodworks]===
 +
 +
*Closed down
 +
 +
===[https://www.starlumber.com/ Star Lumber]===
 +
 +
*Main number: [[Tel:(316) 942-2221|(316) 942-2221]] (Option 4)
 +
*Yard Number: [[Tel:(316) 941-0144|(316) 941-0144]]
 +
*[https://goo.gl/maps/zuPoUsS1qkt7TR7j6 3700 W Irving St, Wichita, KS 67213]
 +
*Hard Wood Stock
 +
*Best Directions is West St. S of Kellogg take Irving East to the Yard. Irving is the street on the North side of Maximum Outdoor Equipment.
 +
 +
===[http://www.friedenlumber.com/ Mark Frieden Lumber]===
 +
 +
*[https://goo.gl/maps/jLSDAoZb4ZdKESFS8 3462 Delaware Rd., Pomona, KS 66076]
 +
 +
===[https://www.intermountainwood.com/ Intermountain Woods]===
 +
 +
*[[Tel:(801) 486-5414|(801) 486-5414]]
 +
*Wichita Location is closed, but they will service Wichita from other locations
 +
 +
[[Category:Areas]]

Latest revision as of 14:30, 12 August 2023

General Information

The MakeICT Woodshop endeavors to empower members to engage in a variety of woodworking traditions safely, and productively.

MakeICT's woodshop consists of 2 rooms dedicated to wood working. Our first room is outfitted with a robust core of stationary machines for preparing, cutting to size, joining, and shaping lumber. Our second room is geared towards refinement with an assortment of stationary and hand tools for drilling, cutting, joining, and assembling projects; the second room is also home to our Lathes and ShopBot CNC Machine.

Lead: Aaron Rivers

Woodworking Terminology Glossary

Machine Access Policy

Required Woodshop Authorization

Woodworking is hazardous by nature. In order to use any of the woodshop tools any member or nonmember must take the Woodshop Authorization course. We want everyone to go home safe and in one piece! SAFE OPERATION of tools is our top priority.

PPE (Personal Safety Equipment)

Anyone entering the shop will be required to wear safety glasses. Use of additional PPE such as hearing protection, and dust masks is heartily encouraged. Cleanliness A clean shop is a safe and productive shop. All members and nonmembers are expected to clean after themselves while working, and thoroughly clean before leaving the area in which they’re working.

Materials

Most woods are allowed in the woodshop, but to protect machinery as well as to protect other members, only WELL INSPECTED reclaimed lumber free of sand, gravel, nails, screws, staples or finish will be allowed in the shop. Pressure treated lumber will NOT be allowed ANY time.


Hazardous Materials Authorization

Wood dust is a major safety concern, so cleanliness is of extreme importance. Some people are allergic to certain lumber. These individuals can and have become sensitized to such materials. Symptoms range from the minor problems, like Dermatitis (Skin Rash), to more serious problems, like Asthma Complication and Mucosal Irritation. Therefore, the use of woods from the following list requires additional authorization and training for proper clean-up after their use. These courses will be posted regularly to the calendar.

  • African Mahogonay
  • Jatoba “Brazilian Cherry”
  • Ebony
  • Ipe, “Brazilian Walnut”
  • Iroko, “African Teak”
  • Makore, “African Cherry”
  • Mansonia, “African Walnut”
  • MDF, Particle Board, Hardboard (Wearing of MDF spoil-boards on the Shopbot exempt)
  • Olivewood
  • Padauk
  • Plastics and epoxies
  • Purple Heart
  • Walnut
  • Wenge
  • Western Red Cedar

ShopBot Authorization

The Shopbot operates on principles different than other woodworking machines, and requires special training. Only members who have completed the required shop bot authorization course (or any ShopBot class prior to the adoption of this authorization requirement) or been approved by an authorized instructor may use the ShopBot.

Lathe Authorization

Wood-turning is a distinct branch of woodworking that operates on principles and with different risks other woodworking operations, and requires special training. Only members who have completed the required lathe authorization course (or any lathe class prior to the adoption of this authorization requirement) or been approved by an authorized instructor may use the lathes.


Approved by the Board of Directors March 15, 2018, Modified 2022 April 21


General Shop Safety

  1. Do not use any machine you are not trained on and comfortable using. If at any time you are unsure of what you are doing, stop immediately and ask for help. Do not force tools.
  2. Do not use any machine that is not in good working order. Stop, unplug, lock out, email or text the area lead aaron.rivers@makeict.org (the lead's cell number is written on the milling room chalk board)and leave a note on the machine and notify the Woodshop Lead.
  3. NEVER ASSUME A TOOL IS PROPERLY ADJUSTED. Always check the tool prior to use.
  4. Use all available dust collection.
  5. Wear safety glasses at all times when in the shop area, including near the machine shop.
  6. Ear protection is also recommended, many of the tools operate above 90 decibels and without protection, you are losing hearing.
  7. When using power tools (including hand power tools):
    • No open-toed shoes or loose clothing (remove drawstrings)
    • Remove objects on hands and wrists (including rings, bracelets, & watches)
    • Remove dangly necklaces, hair ornaments, and earrings
    • Restrain long hair to prevent entanglement
    • Do not wear gloves when operating machinery
  8. While hand tools are safer than most power tools, they are the cause of most workshop injuries. Make sure all hand tools are sharp and in good condition. Be certain that you know how to use these tools in a way that is safe, effective, and will not damage the tool.
  9. Do not leave machines running unattended.
  10. Never talk to or disturb anyone operating power tools. If you must talk to an operator wait until the operator notices you.
  11. Be aware of the work going on around you. Do not accidentally bump into another person or their materials while they are working.
  12. Most shop accidents are caused by working tired, rushed or distracted. As you get more experience, you will learn to listen to the little voice in the back of your mind that says, you probably shouldn't do that. Stop and think, there is usually a safer way of performing that function. These machines do not have a brain, please use yours!

Woodshop Specific Safety

  1. All powered woodcutting and sanding tools must be run with dust collection or vacuum equipment connected to the appropriate ports and on at all times. Do not switch the dust collector on and off without time to cool, if you are planning on working with multiple tools, leave the collector on (repeated quickly turning on and off will overheat the motor).
  2. Smoke or sparks are bad signs in the woodshop. Stop what you are doing and correct the problem. Usually correct feed and depth of cut or getting a sharp bit / blade will help.
  3. No metal cutting allowed on woodshop equipment.
  4. No wet or damp items of any type (including drink containers, rags, or hands) may be placed or left on machine surfaces as they will corrode.
  5. Do not lean or sit on machinery, these are precision pieces of equipment and you can mis-align them.
  6. You are responsible for cleaning your machines, your work space, and putting all tools away immediately after use. Scrap wood should be placed in designated locations. Use vacuums or hand brushes to clean machinery.
  7. Users who consistently fail in their clean-up responsibilities may be denied shop access.
  8. Do not use stationary equipment work surfaces for sanding, project assembly, layout, applying finishes, etc. Or for uses other than their intended purpose.
  9. Make sure machines are in the “off” position and motion has stopped, before leaving them after use.
  10. All safety guards must be kept in place while operating equipment. If a guard or safety device is an impediment to safe operation of a machine - ask for help.
  11. Use equipment only for its intended use.
  12. If you have made an adjustment to a piece of equipment, return it to its normal position after you are done.
  13. Make sure the machine’s work surface is unobstructed and clean before use.
  14. Always be aware of the proximity of moving machine parts to body parts - fingers.
  15. Defects in the wood can be dangerous. Check the stock carefully for knots, splits, and other defects.
  16. Keep the machine clean. Remove all tools, lumber, and unnecessary materials.
  17. Objects left on the machine can vibrate into revolving cutters. They can then be thrown from the machine with great force. Never clean a machine while it is running.
  18. All guests are the responsibility of the member, guests are not allowed to use equipment, unless authorized. This is a working shop, so children less than 9 years old are not allowed for safety.
  19. DO NOT cut anything conductive such as mirrored acrylic, carbon based materials, or laser cutter waste on the Saw Stop tablesaw, the charred areas are carbon and because carbon is conductive, will set off the brake cartridge.
  20. Member will be responsible for replacing the blade and Sawstop brake if the brake is fired for anything other than a true safety firing. If it is a true safety firing, we will need a photo of the fresh wound and SawStop will evaluate the recorded cartridge memory. If SawStop deems it to be a safety firing, they will need the photo and a release for marketing use and they send a replacement cartridge.

This is a video on table saw kickback. Do not try this in the woodshop!

Equipment List

Picture What Manufacturer Model Power Status
Sawstop.jpg 10" Cabinet Table Saw Saw Stop Professional PCS31230 220 Operational
Shopfox jointer.jpg 8" Carbide Helical Head Jointer Shop Fox W1741S 220 Operational
Jet jwp-15hh.jpg 15" Carbide Helical Head Planer Jet JWP-15HH 220 Operational
G0513x2.jpg 17" Bandsaw Extreme Series 131-1/2 inch blade Grizzly G0513X2 220 Operational
W1706.jpg 14" Bandsaw 93-1/2 inch blade Shop Fox W1706 14" Enclosed Base 110 Operational
OneidaDustGorilla.jpg Cyclone Dust Collector Oneida Air 5HP Super Dust Gorilla 220 Operational
Freud SD508.jpg 8 In. Super Stacked Dado Set 8 x 24 Tooth 1/4" to 29/32“ Freud SD508 NA Operational
Jet jdp-17dx.jpg 17" Drill Press with laser Jet JDP-17DX 110 Operational
Jet jbos-5.jpg Oscillating Spindle Sander Jet JBOS-5 110 Operational
Jet jwbg-8.jpg Low Speed 8" Bench Grinder Jet JWBG-8 110 Operational
Worksharp ws3000.jpg Tool Sharpener Work Sharp WS3000 110 Operational
Buffer.jpg 8" Buffer for Honing Central Machinery 40668 110 Operational
Granite.jpg Granite Surface Plate for Sharpening 9" x 12" x 2" A Grade Granite Surface Plate NA Operational
AFS-1000B.jpg 3-speed Remote Control Shop Ambient Dust Filter Jet AFS-1000B 110 Operational
DwaltDW788.jpg 20" Scroll Saw Dewalt DW788 110 Operational
Delta 40-560.jpg 16" Two speed Scroll Saw Delta 40-560, TY II 110 Operational
DW331K.jpg T-slot Jigsaw DeWalt DW331K 110 Operational
Skil 4480.jpg Jigsaw Skil 4480 110 Operational
PC-557.jpg "Biscuit Cutter" Plate Jointer Porter Cable 557 110 Operational
BoschRouter.png 2.25HP Router Bosch 1617EVSPK 110 Operational
DWP611PK.jpg 1.25HP Fixed Base/Plunge Base Router DeWalt DWP611PK 110 Operational
Bosch colt router.png 1HP Router Bosch Colt 110 Operational
4212.jpg 12" Dovetail Jig / Advanced Supplemental Manual Porter Cable 4212 Manual Operational
Dremel MM30.jpg Multi-Max Oscillating Tool Dremel MM30 110 Operational
HitachiFinishNailer.jpg 2" 18Gauge Finish Nailer Hitachi NT50AE2 Air Operational
Pc bn125a.jpg 18 Gauge 5/8-1-1/4" Brad Nailer Porter Cable BN125A Air Operational
Sears AC.jpg 2HP Air Compressor Sears 20 Gallon 220V Operational
Router table.jpg Router Table Rockler NA Operational
PorterCable7518.jpg Router Table with JessEm Lift Porter Cable 7518 110 Operational
BOSCH GCM12SD.jpg 12" Dual Bevel Gliding Miter Saw Bosch GCM12SD 110 Operational
PowerMatic30b.jpg 6x48" Belt/12" Disc sander Powermatic 30b 110 Operational
Delta 31-460.jpg 4x36" Belt/5" Disc sander Delta 31-460 110 Operational
DWV012.jpg 10 gallon HEPA Tool Actuated Self-cleaning Dust Extractor DeWalt DWV012 110 Operational
PC 382 sander.jpg 5 inch 8-hole hook and loop Random Orbit Sander Porter Cable 382 110 Operational
DWE6421K.jpg 5” 8-hole hook and loop random orbit sander DeWalt DWE6421K 110 Operational
Bosch 1295dvs.jpg 5" 8-Hole variable speed random orbit sander Bosch 1295DVS 110 Operational
315279870.jpg 5" 8-Hole Hook & Loop Random Orbit Sander Craftsman 315.279870 110 Operational
PC330.jpg 1/4 Sheet Finish Sander Porter Cable 330 Speed Bloc 110 Operational
Dremel 1731 sander.jpg 1x30 Belt/5 Disc sander Dremel 1731 110 Operational
Jet1221VS.jpg 12x43 Electronic Variable Speed Wood Lathe Jet 1221VS with extension 110 Operational
Oneway talon.jpg 1X8TPI Wood Lathe Chuck Oneway Talon manual Operational
Nova Mercury Lathe.jpg Variable Speed 8"x11" Mini Wood Lathe Teknatool Nova Mercury 110 Operational
Shopbot alpha 4x8.jpg 4'x 8' 3 Axis Shopbot CNC Router ShopBot PRT 96 110 Operational
Parallel clamp.jpg 24" (qty 2) & 40" (qty 2) & 48" (qty 2) Clamps Jorgensen Cabinet Master Clamps manual Operational
Jet clamp.jpg 24" (qty 4) & 31" (qty 2) Clamps Jet Parallel Clamps manual Operational
Bessey tradesman clamps.jpg 30 piece assortment Clamps Bessey Tradesman Clamps manual Operational
Bessey deep.jpg Deep reach (qty 2) Clamps Bessey Tradesman Clamps manual Operational
Masterforce clamp.jpg Deep reach 12" (qty 2) & 24" (qty 7) 36" (qty 2) Clamps Masterforce Clamps manual Operational
Irwin quick clamp.jpg Quick Grip 6" (qty 8) Clamps Irwin Clamps manual Operational
Bessey strap clamp.jpg High Tension Strap Clamp Bessey VSC manual Operational
Kreg-JIg-K5.jpg Kreg Jig Pocket Hole Kit Kreg K5 manual Operational
DMT Stone.jpg Diamond sharpening stones DMT 6" x2" fine and extra-fine manual Operational
Mini-hone.jpg Detail diamond honing kit DMT course, fine and extra-fine D2K manual missing from the shop
D3246.jpg Tablesaw Tenon Jig (Multi-axis) Shop Fox D3246 manual Operational
DCK280C2.jpg 20V cordless ½” drill/driver and Impactor set DeWalt DCK280C2 1.5Ah battery Operational
DCK283D2.jpg 20V Brushless ½” drill/driver and Impactor set DeWalt DCK283D2 1.5Ah battery Operational
Ridgid wd09450.jpg 9 Gallon Shop Vacuum Ridgid WD09450 110 Operational
Eagle 1932.jpg 30 Gallon Flammable Liquid Storage Cabinet]] Eagle 1932 Manual Operational


Commercial Sources for Wood

Purchasing hardwood lumber is very different from purchasing construction lumber. Note that Hardwood Lumber is a botanical term and is not related to the relative hardness of the wood. Hardwoods shed their leaves in the fall. Softwoods are evergreen. That is a general rule, and there are exceptions. Note also that Balsa and Basswood are classified as Hardwoods.

See Wikipedia for more detail on terms, definitions, and practices involved in purchasing hardwoods in the US.

River City Sawmill

Richard's Wood Shop

Elderslie Woodworks

  • Closed down

Star Lumber

Mark Frieden Lumber

Intermountain Woods

Retrieved from "https://wiki.makeict.org/index.php?title=Woodshop_Area&oldid=9280"