Woodshop Area
Contents
General Information
MakeICT's woodshop is an enclosed 32'x36' (1152 sq ft) air conditioned area dedicated to wood working.
Mike Hutton is the Area Lead (formerly Benevolent Dictator) over the woodshop.
The goal of the shop space is to encourage safe, continued learning of the skills needed to further your knowledge of woodworking!
Woodworking Terminology Glossary
Machine Access Policy
Required Woodshop Authorization
Woodworking is hazardous by nature. In order to use any of the woodshop tools any member or nonmember must take the Woodshop Authorization course. We want everyone to go home safe and in one piece! SAFE OPERATION of tools is our top priority.
PPE (Personal Safety Equipment)
Anyone entering the shop will be required to wear safety glasses. Use of additional PPE such as hearing protection, and dust masks is heartily encouraged. Cleanliness A clean shop is a safe and productive shop. All members and nonmembers are expected to clean after themselves while working, and thoroughly clean before leaving the area in which they’re working.
Materials
Most woods are allowed in the woodshop, but to protect machinery as well as to protect other members, only WELL INSPECTED reclaimed lumber free of sand, gravel, nails, screws, staples or finish will be allowed in the shop. Pressure treated lumber will NOT be allowed ANY time.
Hazardous Materials Authorization
Wood dust is a major safety concern, so cleanliness is of extreme importance. Some people are allergic to certain lumber. These individuals can and have become sensitized to such materials. Symptoms range from the minor problems, like Dermatitis (Skin Rash), to more serious problems, like Asthma Complication and Mucosal Irritation. Therefore, the use of woods from the following list requires additional authorization and training for proper clean-up after their use. These courses will be posted regularly to the calendar.
- African Mahogonay
- Jatoba “Brazilian Cherry”
- Ebony
- Ipe, “Brazilian Walnut”
- Iroko, “African Teak”
- Makore, “African Cherry”
- Mansonia, “African Walnut”
- MDF, Particle Board, Hardboard (Wearing of MDF spoil-boards on the Shopbot exempt)
- Olivewood
- Padauk
- Plastics and epoxies
- Purple Heart
- Walnut
- Wenge
- Western Red Cedar
ShopBot Authorization
The Shopbot operates on principles different than other woodworking machines, and requires special training. Only members who have completed the required shop bot authorization course (or any ShopBot class prior to the adoption of this authorization requirement) or been approved by an authorized instructor may use the ShopBot.
Lathe Authorization
Wood-turning is a distinct branch of woodworking that operates on principles and with different risks other woodworking operations, and requires special training. Only members who have completed the required lathe authorization course (or any lathe class prior to the adoption of this authorization requirement) or been approved by an authorized instructor may use the lathes.
Approved by the Board of Directors March 15, 2018, Modified 2022 April 21
Specific Tools
Please use the DeWalt DWV012 HEPA tool actuated dust extractor for capturing sanding dust connected to sanders to gather the fine sanding dust at the source, it is not a shop vacuum.
General Shop Safety
- Do not use any machine you are not trained on and comfortable using. If at any time you are unsure of what you are doing, stop immediately and ask for help. Do not force tools.
- Do not use any machine that is not in good working order. Stop, unplug and leave a note on the machine and notify the woodshop BD.
- NEVER ASSUME A TOOL IS PROPERLY ADJUSTED. Always check the tool prior to use.
- Wear safety glasses at all times when in the shop area, including near the machine shop.
- Ear protection is also recommended, many of the tools operate above 90 decibels and without protection, you are losing hearing.
- When using power tools (including hand power tools):
- No open-toed shoes or loose clothing (remove drawstrings)
- Remove objects on hands and wrists (including rings, bracelets, & watches)
- Remove dangly necklaces, hair ornaments, and earrings
- Restrain long hair to prevent entanglement
- Do not wear gloves when operating machinery
- While hand tools are safer than most power tools, they are the cause of most workshop injuries. Make sure all hand tools are sharp and in good condition. Be certain that you know how to use these tools in a way that is safe, effective, and will not damage the tool.
- Do not leave machines running unattended.
- Never talk to or disturb anyone operating power tools. If you must talk to an operator wait until the operator notices you.
- Be aware of the work going on around you. Do not accidentally bump into another person or their materials while they are working.
- Most shop accidents are caused by working tired, rushed or distracted. As you get more experience, you will learn to listen to the little voice in the back of your mind that says, you probably shouldn't do that. Stop and think, there is usually a safer way of performing that function. These machines do not have a brain, please use yours!
Woodshop Specific Safety
- All powered woodcutting and sanding tools must be run with dust collection or vacuum equipment connected to the appropriate ports and on at all times. Do not switch the dust collector on and off without time to cool, if you are planning on working with multiple tools, leave the collector on (repeated quickly turning on and off will overheat the motor).
- Smoke or sparks are bad signs in the woodshop. Stop what you are doing and correct the problem. Usually correct feed and depth of cut or getting a sharp bit / blade will help.
- No metal cutting allowed on woodshop equipment.
- No wet or damp items of any type (including drink containers, rags, or hands) may be placed or left on machine surfaces as they will corrode.
- Do not lean or sit on machinery, these are precision pieces of equipment and you can mis-align them.
- You are responsible for cleaning your machines, your work space, and putting all tools away immediately after use. Scrap wood should be placed in designated locations. Use vacuums or hand brushes to clean machinery.
- Users who consistently fail in their clean-up responsibilities may be denied shop access.
- Do not use stationary equipment work surfaces for sanding, project assembly, layout, applying finishes, etc. Or for uses other than their intended purpose.
- Make sure machines are in the “off” position and motion has stopped, before leaving them after use.
- All safety guards must be kept in place while operating equipment. If a guard or safety device is an impediment to safe operation of a machine - ask for help.
- Use equipment only for its intended use.
- If you have made an adjustment to a piece of equipment, return it to its normal position after you are done.
- Make sure the machine’s work surface is unobstructed and clean before use.
- Always be aware of the proximity of moving machine parts to body parts - fingers.
- Defects in the wood can be dangerous. Check the stock carefully for knots, splits, and other defects.
- Keep the machine clean. Remove all tools, lumber, and unnecessary materials.
- Objects left on the machine can vibrate into revolving cutters. They can then be thrown from the machine with great force. Never clean a machine while it is running.
- All guests are the responsibility of the member, guests are not allowed to use equipment. This is a working shop, so children less than 7 years old are not allowed for safety.
- DO NOT cut anything conductive such as mirrored acrylic, carbon based materials, or laser cutter waste on the Saw Stop tablesaw, the charred areas are carbon and because carbon is conductive, will set off the brake cartridge.
- Member will be responsible for replacing the blade and Sawstop brake if the brake is fired for anything other than a true safety firing. If it is a true safety firing, we will need a photo of the fresh wound and SawStop will evaluate the recorded cartridge memory. If SawStop deems it to be a safety firing, they will need the photo and a release for marketing use and they send a replacement cartridge.
This is a video on table saw kickback. Do not try this in the woodshop!
Equipment List
Picture | What | Manufacturer | Model | Power | Status | Expert |
---|---|---|---|---|---|---|
![]() |
10" Cabinet Table Saw | Saw Stop | Professional PCS31230 | 220 | Operational | Mike Hutton |
![]() |
8 In. Super Stacked Dado Set 8 x 24 Tooth 1/4" to 29/32“ | Freud | SD508 | NA | Operational | Mike Hutton |
![]() |
8" Carbide Helical Head Jointer | Shop Fox | W1741S | 220 | Operational | Mike Hutton |
![]() |
15" Carbide Helical Head Planer | Jet | JWP-15HH | 220 | Operational | Mike Hutton |
![]() |
17" Drill Press with laser | Jet | JDP-17DX | 110 | Operational | Mike Hutton |
![]() |
Oscillating Spindle Sander | Jet | JBOS-5 | 110 | Operational | Mike Hutton |
![]() |
Low Speed 8" Bench Grinder | Jet | JWBG-8 | 110 | Operational | Mike Hutton |
![]() |
Tool Sharpener | Work Sharp | WS3000 | 110 | Operational | Mike Hutton |
![]() |
8" Buffer for Honing | Central Machinery | 40668 | 110 | Operational | Mike Hutton |
![]() |
Granite Surface Plate for Sharpening | 9" x 12" x 2" A Grade | Granite Surface Plate | NA | Operational | Mike Hutton |
![]() |
Cyclone Dust Collector | Oneida Air | 5HP Super Dust Gorilla | 220 | Operational | Mike Hutton |
![]() |
3-speed Remote Control Shop Ambient Dust Filter | Jet | AFS-1000B | 110 | Operational | Mike Hutton |
![]() |
20" Scroll Saw | Dewalt | DW788 | 110 | Operational | Mike Hutton |
![]() |
16" Two speed Scroll Saw | Delta | 40-560, TY II | 110 | Operational | Mike Hutton |
![]() |
T-slot Jigsaw | DeWalt | DW331K | 110 | Operational | Mike Hutton |
![]() |
Jigsaw | Skil | 4480 | 110 | Operational | Mike Hutton |
![]() |
"Biscuit Cutter" Plate Jointer | Porter Cable | 557 | 110 | Operational | Mike Hutton |
![]() |
2.25HP Router | Bosch | 1617EVSPK | 110 | Operational | Mike Hutton |
![]() |
1.25HP Fixed Base/Plunge Base Router | DeWalt | DWP611PK | 110 | Operational | Mike Hutton |
![]() |
1HP Router | Bosch | Colt | 110 | Operational | Mike Hutton |
![]() |
Multi-Max Oscillating Tool | Dremel | MM30 | 110 | Operational | Mike Hutton |
![]() |
2" 18Gauge Finish Nailer | Hitachi | NT50AE2 | Air | Operational | Mike Hutton |
![]() |
18 Gauge 5/8-1-1/4" Brad Nailer | Porter Cable | BN125A | Air | Operational | Mike Hutton |
![]() |
Router Table | Rockler | NA | Operational | Mike Hutton | |
![]() |
Router Table with JessEm Lift | Porter Cable | 7518 | 110 | Operational | Mike Hutton |
![]() |
12" Single Bevel Miter Saw | Dewalt | DW715 | 110 | Operational | Mike Hutton |
![]() |
12" Double Bevel Miter Saw | Dewalt | DW705 | 110 | Out of Order- Bent Shaft- damaged! | Mike Hutton |
![]() |
6x48" Belt/12" Disc sander | Powermatic | 30b | 110 | Operational | Mike Hutton |
![]() |
4x36" Belt/5" Disc sander | Delta | 31-460 | 110 | Operational | Mike Hutton |
![]() |
10 gallon HEPA Tool Actuated Self-cleaning Dust Extractor | DeWalt | DWV012 | 110 | Operational | Mike Hutton |
![]() |
5 inch 8-hole hook and loop Random Orbit Sander | Porter Cable | 382 | 110 | Operational | Mike Hutton |
![]() |
5” 8-hole hook and loop random orbit sander | DeWalt | DWE6421K | 110 | Operational | Mike Hutton |
![]() |
5" 8-Hole variable speed random orbit sander | Bosch | 1295DVS | 110 | Operational | Mike Hutton |
![]() |
1x30 Belt/5 Disc sander | Dremel | 1731 | 110 | Operational | Mike Hutton |
![]() |
14" Bandsaw 93-1/2 inch blade | Rockwell | 14" Enclosed Base | 110 | Operational | Mike Hutton |
![]() |
17" Bandsaw Extreme Series 131-1/2 inch blade | Grizzly | G0513X2 | 220 | Operational | Mike Hutton |
![]() |
12x43 Electronic Variable Speed Wood Lathe | Jet | 1221VS with extension | 110 | Operational | Mike Hutton |
![]() |
1X8TPI Wood Lathe Chuck | Oneway | Talon | manual | Operational | Mike Hutton |
![]() |
Variable Speed 8"x11" Mini Wood Lathe | Teknatool | Nova Mercury | 110 | Operational | Mike Hutton |
![]() |
4'x 8' 3 Axis Shopbot CNC Router | ShopBot | PRT 96 | 110 | Operational | Curt Gridley or James Lancaster |
![]() |
24" (qty 2) & 40" (qty 2) & 48" (qty 2) Clamps | Jorgensen | Cabinet Master Clamps | manual | Operational | Mike Hutton |
![]() |
24" (qty 2) Clamps | Jet | Parallel Clamps | manual | Operational | Mike Hutton |
![]() |
30 piece assortment Clamps | Bessey | Tradesman Clamps | manual | Operational | Mike Hutton |
![]() |
Deep reach (qty 2) Clamps | Bessey | Tradesman Clamps | manual | Operational | Mike Hutton |
![]() |
Deep reach 12" (qty 2) & 24" (qty 7) 36" (qty 2) Clamps | Masterforce | Clamps | manual | Operational | Mike Hutton |
![]() |
Quick Grip 6" (qty 8) Clamps | Irwin | Clamps | manual | Operational | Mike Hutton |
![]() |
High Tension Strap Clamp | Bessey | VSC | manual | Operational | Mike Hutton |
![]() |
Kreg Jig Pocket Hole Kit | Kreg | K5 | manual | Operational | Mike Hutton |
![]() |
Diamond sharpening stones | DMT | 6" x2" fine and extra-fine | manual | Operational | Mike Hutton |
![]() |
Detail diamond honing kit | DMT | course, fine and extra-fine D2K | manual | missing from the shop | Mike Hutton |
![]() |
Tablesaw Tenon Jig (Multi-axis) | Shop Fox | D3246 | manual | Operational | Mike Hutton |
![]() |
20V cordless ½” drill/driver and Impactor set | DeWalt | DCK280C2 | 1.5Ah battery | Operational | Mike Hutton |
![]() |
20V Brushless ½” drill/driver and Impactor set | DeWalt | DCK283D2 | 1.5Ah battery | Operational | Mike Hutton |
![]() |
9 Gallon Shop Vacuum | Ridgid | WD09450 | 110 | Operational | Mike Hutton |
![]() |
30 Gallon Flammable Liquid Storage Cabinet]] | Eagle | 1932 | Manual | Operational | Mike Hutton |