Equipment
From MakeICT Wiki
Revision as of 15:53, 9 August 2015 by Dominic Canare (talk | contribs) (Replaced content with "__TOC__ == Classroom == {{:Classroom}} == Electrical and Rapid Prototyping == {{:Electronics and Rapid Prototyping}} == FabLab == {{:FabLab}} == Lounge == {{:Lounge}}...")
Contents
Classroom
- 1x Optoma EH500 DLP Projector
- Full HD 1080p
- 4700 Lumens
- HDMI, DisplayPort, 2xVGA
- 15x Toshiba S55T-B5152 Laptops
- Dual-boot Debian Stretch (GNU/Linux) / Windows 10
- Intel i5
- 4gb RAM
- 500gb hard drive
- Intel HD Graphics + 1920x1080 Touchscreen display
- SD card reader
- 3x HP Pro 3005MT Internet-connected desktop PC's
- PC 1: Ubuntu Studio (GNU/Linux), PC2: Windows10/Ubuntu Studio (gNU/Linux), PC3: Windows 7
- AMD Athlon II X3 435 (triple-core)
- 2.7gb RAM
- 300gb hard drive
- NVIDIA GeForce 9100
- 1x HP Photosmart C5280 Scanner - (it's actually an all-in-one, but the printer part isn't working)
- The scanner is connected to the adjacent PC. To scan a document, open the System Menu and select Graphics > Simple Scan
- 1x Plotter HP Designjet 1050c plus
- Capable of up to 36 inch wide prints.
- Due to the cost of ink, designs should use colors instead of blacks.
- 1x HP DeskJet 3410
- Backup 3in1 for Classroom
Electrical and Rapid Prototyping
| Picture | What | Manufacturer | Model | Power | Status | Expert |
|---|---|---|---|---|---|---|
 |
Soldering iron | Various | Various | 110 | Working | James Seymour |
 |
Logic Analyzer | Tektronix | 1240 | 110 | Working | James Seymour |
 |
Oscilliscope | Tektronix | 492P | 110 | Working | James Seymour |
 |
Oscilloscope | Tektronix | 465B | 110 | Working | James Seymour |
 |
Graphical Multimeter | Fluke | 867 | 9V | Working | James Seymour |
 |
True RMS Non-contact Multimeter | Fluke | 117 | 9V | Working | James Seymour |
 |
High Voltage Probe | Fluke | 80K-40 | NA | Working | James Seymour |
 |
Clamp on DC/AC Current Probe]] | Fluke | 80i-1010 | 1-1000 Adc, 1-600Aac (1 mV/A) | Working | James Seymour |
 |
Lead Free Reflow Oven | Qinsi Technology | QS-5100 | 110 | Working | James Seymour |
 |
Soldering Station with Heat Gun | Arksen | 992D | 110 | Working | James Seymour |
 |
Board Goblin-Circuit Board Mill | Tom McGuire | 47158 | 110 | Working | Tom McGuire |
 |
CNC Mill | Probotix | Fireball V90 | 110 | Not Working | Tom McGuire |
 |
CNC Mill | Sherline | Sherline CNC Mill | 110 | Working | James Lancaster Christian Kindel |
 |
Variable power supply | SPECO | PSV-5 | 110 | Under Repair SPECO PSV-5 repair log | James Seymour |
 |
5Mhz Tone Generator | MingHe | UDB1005S | 110 | In-Work | Mike Barushok |
 |
Vacuum Pump | Gast | DOA-P701-AA | 110 | Working | James Seymour |
FabLab
| Picture | What | Manufacturer | Model | Status | Resources |
|---|---|---|---|---|---|
|
Laser Cutter | Rabbit Laser | QX1290 | Operational |
MakeICT resources External resources |
|
|
Laser Cutter | Rabbit Laser | QX1290 | Operational |
MakeICT resources External resources
External resources |
 |
3D Printer | Prusa3D | i3 MK4 | Operational | MakeICT resources |
|
3D Printer | Prusa3D | i3 Mk3S+ | Operational | MakeICT resources |
|
|
3D Printer | Prusa3D | i3 Mk3S+ | Operational | MakeICT resources |
|
|
3D Printer | Prusa3D | i3 Mk3S+ | Operational | MakeICT resources |
|
|
3D Printer | Prusa3D | i3 Mk3S+ | Operational | MakeICT resources |
|
3D Printer | Ultimaker | Ultimaker 2 | Operational |
MakeICT resources External resources |
|
Graphtec Plotter/Vinyl Cutter | Graphtec | Graphtec_FC2200-90/EX | Operational | |
 |
CNC Mini Milling Machine | Originally Sherline | Little Blue Mill | Operational | Little Blue Mill |
|
Foam Cutter | Tom McGuire | Foam Cutting Machine | Needs Maintenance | |
 |
Vacuum Former | Industrial Arts Supply Co. | Nichols model 10-B Therm-O-Vac | Operational |
MakeICT resources |
|
Kinect Scanner | Microsoft | Kinect | Operational | |
| Turntable for Kinect | James Lancaster | Turntable | Operational | ||
 |
Plastic Injection Molding Machine | Needs tested | MakeICT resources | ||
| CNC Mini Mill | Sherline | Black Sherline Mill | Needs repaired | Sherline_CNC_Mill | |
| CNC Mini Lathe | Emco | Emco Lathe | Needs repaired and setup |
| Picture | What | Manufacturer | Model | Status | Resources |
|---|---|---|---|---|---|
|
3D Printer | James Lancaster | RepRap Prusa Mendel | Retired |
MakeICT resources External resources |
| CNC Router | Probotix | Fireball V90 | Retired | V90 | |
|
3D Printer | SeeMeCNC | Rostock Max V2 | Retired! |
MakeICT resources |
|
3D Printer | Creality3D | CR-10s | Retired | MakeICT resources |
Lounge
Metal Shop
- REDIRECT Metalshop Area
Pending...
Studio Arts
Woodshop
| Picture | What | Manufacturer | Model | Power | Status |
|---|---|---|---|---|---|
 |
10" Cabinet Table Saw | Saw Stop | Professional PCS31230 | 220 | Operational |
 |
8" Carbide Helical Head Jointer | Shop Fox | W1741S | 220 | Operational |
 |
15" Carbide Helical Head Planer | Jet | JWP-15HH | 220 | Operational |
 |
17" Bandsaw Extreme Series 131-1/2 inch blade | Grizzly | G0513X2 | 220 | Operational |
 |
14" Bandsaw 93-1/2 inch blade | Shop Fox | W1706 14" Enclosed Base | 110 | Operational |
 |
Cyclone Dust Collector | Oneida Air | 5HP Super Dust Gorilla | 220 | Operational |
 |
8 In. Super Stacked Dado Set 8 x 24 Tooth 1/4" to 29/32“ | Freud | SD508 | NA | Operational |
 |
17" Drill Press with laser | Jet | JDP-17DX | 110 | Operational |
 |
Oscillating Spindle Sander | Jet | JBOS-5 | 110 | Operational |
 |
Low Speed 8" Bench Grinder | Jet | JWBG-8 | 110 | Operational |
 |
Tool Sharpener | Work Sharp | WS3000 | 110 | Operational |
 |
8" Buffer for Honing | Central Machinery | 40668 | 110 | Operational |
 |
Granite Surface Plate for Sharpening | 9" x 12" x 2" A Grade | Granite Surface Plate | NA | Operational |
 |
3-speed Remote Control Shop Ambient Dust Filter | Jet | AFS-1000B | 110 | Operational |
 |
20" Scroll Saw | Dewalt | DW788 | 110 | Operational |
 |
16" Two speed Scroll Saw | Delta | 40-560, TY II | 110 | Operational |
 |
T-slot Jigsaw | DeWalt | DW331K | 110 | Operational |
 |
Jigsaw | Skil | 4480 | 110 | Operational |
 |
"Biscuit Cutter" Plate Jointer | Porter Cable | 557 | 110 | Operational |
 |
2.25HP Router | Bosch | 1617EVSPK | 110 | Operational |
 |
1.25HP Fixed Base/Plunge Base Router | DeWalt | DWP611PK | 110 | Operational |
 |
1HP Router | Bosch | Colt | 110 | Operational |
 |
12" Dovetail Jig / Advanced Supplemental Manual | Porter Cable | 4212 | Manual | Operational |
 |
Multi-Max Oscillating Tool | Dremel | MM30 | 110 | Operational |
 |
2" 18Gauge Finish Nailer | Hitachi | NT50AE2 | Air | Operational |
 |
18 Gauge 5/8-1-1/4" Brad Nailer | Porter Cable | BN125A | Air | Operational |
 |
2HP Air Compressor | Sears | 20 Gallon | 220V | Operational |
 |
Router Table | Rockler | NA | Operational | |
 |
Router Table with JessEm Lift | Porter Cable | 7518 | 110 | Operational |
 |
12" Dual Bevel Gliding Miter Saw | Bosch | GCM12SD | 110 | Operational |
 |
6x48" Belt/12" Disc sander | Powermatic | 30b | 110 | Operational |
 |
4x36" Belt/5" Disc sander | Delta | 31-460 | 110 | Operational |
 |
10 gallon HEPA Tool Actuated Self-cleaning Dust Extractor | DeWalt | DWV012 | 110 | Operational |
 |
5 inch 8-hole hook and loop Random Orbit Sander | Porter Cable | 382 | 110 | Operational |
 |
5” 8-hole hook and loop random orbit sander | DeWalt | DWE6421K | 110 | Operational |
 |
5" 8-Hole variable speed random orbit sander | Bosch | 1295DVS | 110 | Operational |
 |
5" 8-Hole Hook & Loop Random Orbit Sander | Craftsman | 315.279870 | 110 | Operational |
 |
1/4 Sheet Finish Sander | Porter Cable | 330 Speed Bloc | 110 | Operational |
 |
1x30 Belt/5 Disc sander | Dremel | 1731 | 110 | Operational |
 |
12x43 Electronic Variable Speed Wood Lathe | Jet | 1221VS with extension | 110 | Operational |
 |
1X8TPI Wood Lathe Chuck | Oneway | Talon | manual | Operational |
 |
Variable Speed 8"x11" Mini Wood Lathe | Teknatool | Nova Mercury | 110 | Operational |
 |
4'x 8' 3 Axis Shopbot CNC Router | ShopBot | PRT 96 | 110 | Operational |
 |
24" (qty 2) & 40" (qty 2) & 48" (qty 2) Clamps | Jorgensen | Cabinet Master Clamps | manual | Operational |
 |
24" (qty 4) & 31" (qty 2) Clamps | Jet | Parallel Clamps | manual | Operational |
 |
30 piece assortment Clamps | Bessey | Tradesman Clamps | manual | Operational |
 |
Deep reach (qty 2) Clamps | Bessey | Tradesman Clamps | manual | Operational |
 |
Deep reach 12" (qty 2) & 24" (qty 7) 36" (qty 2) Clamps | Masterforce | Clamps | manual | Operational |
 |
Quick Grip 6" (qty 8) Clamps | Irwin | Clamps | manual | Operational |
 |
High Tension Strap Clamp | Bessey | VSC | manual | Operational |
 |
Kreg Jig Pocket Hole Kit | Kreg | K5 | manual | Operational |
 |
Diamond sharpening stones | DMT | 6" x2" fine and extra-fine | manual | Operational |
 |
Detail diamond honing kit | DMT | course, fine and extra-fine D2K | manual | missing from the shop |
 |
Tablesaw Tenon Jig (Multi-axis) | Shop Fox | D3246 | manual | Operational |
 |
20V cordless ½” drill/driver and Impactor set | DeWalt | DCK280C2 | 1.5Ah battery | Operational |
 |
20V Brushless ½” drill/driver and Impactor set | DeWalt | DCK283D2 | 1.5Ah battery | Operational |
 |
9 Gallon Shop Vacuum | Ridgid | WD09450 | 110 | Operational |
 |
30 Gallon Flammable Liquid Storage Cabinet]] | Eagle | 1932 | Manual | Operational |
